#Product of MRAD

[ghostlythunderbird]

“Inside the Mind of an Active Duty Airman” #2

This little series will be compiled to things ranging from asks/questions to things to help out writers who don’t know much about the American Military or Military life as a whole.

Objective #1: Deployments and TDYs

In military life everyone will go on at least one deployment over their military career. These deployments can range from a week up to sometimes 8 months or longer, with the average deployment lifespan being roughly 6 months from an Air Force Civil Engineer perspective. There are quite a few deployments that happen all around the US and in its overseas bases, some can be in the US in another start or can be overseas.

Did you know there aren't just single branch deployments or even single country ones? More often than not there is a chance with someone being deployed with other branches if there are specific duties that are needed, this is often called Joint Combat Training. This is also the same when the US military works with other countries, that can often be air mobility, land, and sea based exercises. Some of the most notable countries would be the United Kingdom, Australia, South Korea, France, Germany, and the Republic of Singapore to name a few.  

Now for TDYs, these are often called Temporary Duty Stations and they are different from a deployment. While a deployment is often in another country or sometimes in the middle of nowhere, a TDY is often at another base for training or special duties. These are often made by the chain of command and usually have at least a month's notice before the person has to report to their TDY station.

In preparation of becoming deployed or TDY every person has a form of out-processing to ensure that their records match for the duration of the time they are away from their home station. They also have to have their deployment bags ready, there are often checklists that are given out to ensure that the personnel have plenty of clothes, toiletries, and footwear for the entire duration.

Objective #2: Leave and coming off deployment

Coming off deployments can be either relaxing or stressful for personnel depending on the environment and workload. To help combat mental stressors and prevent from lowering morale and work productivity returning personnel are often given leave time to allow a steady readjustment. This is often referred to as R&R leave and depending on the lifespan of the deployment it is often roughly 2 weeks of paid leave time. There are also different types of leave that are often used in various situations.

Ordinary leave: This is the base level of leave that can be applied at any time, of course this is often at the discretion of one’s chain of command and can range from 2-30 days.

Rest and Relaxation (R&R) leave: Often only given out after Deployments and TDYs and ranges from 14-21 days.

Emergency leave: Only used if there is an Immediate family emergency or when there is a death in the family.

Objective #3: Clothing and Weaponry

This one will be relatively short as there are only a few clothing options offered by the military as well as weaponry.

Clothing: More often than not all military members will have a base military uniform that they use on a day to day basis. The branches have uniform patterns to set them apart although some may share the same patterns but there are subtle differences in the uniforms. (Army, Airforce, Navy, Marine Corps, Coast Guard). For those operating in special forces or in special duties they will often be given a needed gear such as Cold and Hot weather gear for the needed terrain.

Weaponry: All members of the armed forces must know how to handle, operate, and clean their weapons. All branches have regular training and this can be more or less frequent depending on branch and career field, Most will be monthly, Bi-annually, or annually. The most common weapon types will be Rifles (M16 and M4), Pistols (Barrett M9, Sig Sauer P229), and Long Range Rifles (Barrett M82, M40, and Mk 22 MRAD). These will be the most common weapon profiles in current service in the US Armed Forces.

Objective #4: Military Selection and Boot Camp

Joining the military may sound easy, but believe it or not it's actually difficult to be selected to pass through even before you go to your boot camp. Everyone who has signed up has had to go through a selection process called MEPS (Military Entrance Processing Station) that determines your eligibility for military service. Here you have to go through your medical records, drug testing, range of mobility tests, and many other tests. This will often occur to help determine if you're eligible physically to apply for most jobs. But do beware as most MEPS actually try to disqualify you and often say you failed in a certain section that may hinder you from your selected job and might become a setback in starting your military service.

After surviving your MEPS process you then begin the road to getting ready to be shipped off to your basic training. Basic Training is where all members on your selected branch will train to gain the title of Soldier, Marine,Sailor, Airman, and Guardian. The US has different uses for each branch such as the Army and Marines are frontline combatants, the Navy as naval transport and support from the sea, and the Air Force as Air transport and air support for ground troops. So their basic training must reflect the military's base functions.

U.S. Army: Also known as BCT (Basic Combat Training) is roughly 9 weeks but that is not included in-processing and job training.

U.S. Marine Corps: The longest basic training at 12 weeks not including 4 days for in-processing. 

U.S. Navy: Aside from 1 week that is used for in-processing, there are 7 initial weeks for naval basic training.

U.S. Air Force: Known as Basic Training, the Air Force has the second shortest training out of all the branches at 8 weeks before moving on to Technical Training, where Airmen learn their individual jobs. 

U.S. Coast Guard: As the shortest basic training, the US Coast Guard only trains for 7 ½ weeks.

Thanks for checking out my blog! If you have any military questions or just need help on a military related fic don't be afraid so ask!

#cod mw2 #cod modern warfare #konig cod #ghost cod #john price #john soap mactavish #simon riley #kyle gaz garrick #alejandro vargas #rodolfo cod #military #InsidetheMindof

[alwaysme]

6x13: New Sensation

Writer(s): Stacey R. Rose

Director: Jihane Mrad Balaa

Air Date: March 27, 2023

Production Code: 613

Synopsis: (expected to be posted around March 11)

Stills: (expected to be posted around March 22)

#911onfox #911 fox

[militaryleak]

Barrett Firearms Manufacturing Introduces MRADELR Designated Marksman Rifle

Barrett Firearms Manufacturing Inc., the leader in long range, is pleased to announce the commercial release of their newest, award-winning firearm, the MRADELR. The MRADELR is a high quality, military tested, off-the-shelf, extreme long-range system with user changeable barrels and calibers. Designed to deliver precision typically achieved only by custom-built rifles, this rifle expands the bolt-action, magazine-fed MRAD family to include 416 Barrett with additional large-caliber options to be available in the future. Boasting innovative technology, precision engineering, and exceptional materials, the MRADELR is yet another example of Barrett Firearms’ dedication to excellence. Recently crowned the “Ballistic Best Editor’s Select” for the Best ELR Rifle, the MRADELR has demonstrated excellent precision and accuracy with its remarkable performance at the global King of 2 Miles competition earning a remarkable 2nd place finish as a production rifle competing primarily against custom builds. This rifle is poised to redefine the standards of long-range shooting, combining cutting-edge technology with precision engineering. With Barrett’s proven track record and recognition among the industry’s elite, their new MRADELR stands as a symbol of innovation and excellence, offering shooters an unrivaled experience in the world of extreme long-range marksmanship.

Barrett Firearms Manufacturing Inc., the leader in long range, is pleased to announce the commercial release of their newest, award-winning firearm, the MRADELR. The MRADELR is a high quality, military tested, off-the-shelf, extreme long-range system with user changeable barrels and calibers. Designed to deliver precision typically achieved only by custom-built rifles, this rifle expands the…

View On WordPress

[lesterplatt]

Canon - Beauty (DirCut) from Lubos Vacke on Vimeo.

Client: Canon Agency: Memac Ogilvy Production House: Truffle

Executive Producer: Cynthia Chammas

Director: Lubos Vacke DOP: Anna Smoronova Editor: Marek Kralovsky

Line Producer: Nadine Checrallah Production Manager: Sarah Hassoun 1st AD: Rana Salem Production Coordinator: Stephanie Hobeika Production Assistant: Mahmoud Balaghi Chaperone: Youssef Hamdoun, Youssef Tawil

Focus Puller: Salim Sadaka Steadycam: Christopher Kechechian VOT: Mikitta DIT: Joseph Nabhan IT: Ahmad Equipment Driver: George abou Zeid Key Grip: George Chami Grip: Best Boy Gaffer: Alex Kiwakis Gear House: Final Cut

Art Director: Rawan Bazerji Props Buyer: Salwa Rahme Art Department Trucks: Hassan Dia

Location Manager: Joe Fayad, Joyce Hanna Unir/Regie: Eid Mrad Caterer: Ghattas

Wardrobe Stylist: Missy Tohme

Casting Director: Solange Elias Casting Director Assistant: Yara Tarabay

Postproduction Producer: Mary Bou Akl Postproduction House: Eighty4 Postproduction House Produce: Viviana Nino VFX Supervisor: Jay Boustany Compositors & Animators: Miguel Cusso, Melody Pang, Nicolas Martinez Colo Grading Artist: Xavier Dockx

Music: Adrian Cermak Sound Design: Samuel Jurkovic

[mme-ae]

Thermal imager camera SATIR D600 The SATIR-D600 is an overall performance thermography digital digicam that has evolved from the D300 Mid-Level Model. The D600 shares a few identical capabilities as the D300, however, it has a higher-performing infrared detector of 640x480. The 640x480 IR detector generates 307, 200 effective pixels in an effort to supply terrific imaging and video recordings to the end user. Vast Imaging modes The D600 has four imaging modes: Digital, IR, Duo-Vision, and Duo-Vision Plus. Duo Vision Plus is SATIR's latest imaging mode that includes digital and infrared/thermal imaging, offering the end user more detail than thermal imaging. Full Autofocus screen The D600 features an autofocus touchscreen to ensure the user has a clearly focused thermal image. That means when you create a report, the idea is already in focus, allowing for accurate evaluation and analysis. It also has a motorized lens that allows the user to manually focus the camera using the keyboard. laser pointer and battery life The D600 has a long battery life of 5 hours, meaning it can be used for a long day of surveying without being charged. The D600 also has a laser ranger finder that acts as a laser pointer and can help tell the end-users the distance of the target. other amazing functions The D600 satir thermal camera has a number of measurement functions, such as B. 8 moving points, auto hot/cold spots, 2 area charts, isotherms, and lines that allow the end user to analyze the target more meaningfully. It has a temperature alarm that can be useful if you want to detect abnormal temperature readings. The end user can configure the temperature alarm according to their survey. satir d300 vs d600 In this section, we will be looking at the differences between the Satir D-300 and the Satir D-600. The SATIR D600 is a more advanced model than the Satir D-300. The difference in price reflects this. The D600 has a longer battery life and an autofocus screen which makes it easier to take photos in low-light conditions. It also has an imaging mode called "super night" which gives better quality night shots than the "night scene" mode of the D300. Can thermal camera see gun? Weapons can be easily detected with the infrared sensor camera, but the wide variation in weapon models can present a challenging task for the surveillance system, which generates false alarms. there are lots of thermal cameras exist in the store. among them we recommend you to check out satir products like satir g96 , satir gf5000 or satir hotfind-s. Thermal imager camera SATIR D 600 Specifications: Detector Resolution: 640x480 Spectral Range: 8-14um Spatial Resolution: 0.65 mrad Temperature Range: -20°C ~ + 600°C, up to +1500°C (Optional) Accuracy: ±2°C or ± 2% of readings

[secondhand81625099]

Hey! It's Day 5 of RECOIL's 18 Days of Christmas Giveaways! Enter to Win a 5 Tactix 1-6X24 Thunder Ranch Low Power Variable Optic from Riton Optics and RECOIL! If you refer friends you get more chances to win :) https://wn.nr/2JZgQT

[euro-journal-english-news]

Guns N' Roses frontman Axl Rose lashes out at production staff live on stage during Melbourne show

Guns N’ Roses frontman Axl Rose lashes out at production staff live on stage during Melbourne show

Guns N’ Roses frontman Axl Rose lashes out at production staff during live Melbourne show: ‘Turn that f***ing spotlight off, I’m trying to entertain the people!’ By Mary Mrad For EuroJournal Australia Published: 18:05 EST, 3 December 2022 | Updated: 23:52 EST, 3 December 2022 Guns N’ Roses frontman Axl Rose has lashed out at production staff live on air during the band’s Melbourne show on…

View On WordPress

[imissyourbattlecries]

🤷‍♂️

#cevansedit #evansedit #marvelcastedit #cevanscentral #Red Sea Diving Resort #Ari Levinson #Product of MRAD

[diasporaslippage]

The Arabian fashion initiative supporting young and emerging designers Tulle embroidered gown Sara Mrad, tights worn throughout stylist’s own, silk head scarf ÉLBÉ, silver and pearl earrings Alexandra Hakim, Hair Aldo Coppola at Salon Doha, make-up Lucky Allure, model Amalina Alexander, photography assistant Joe Reddy, styling assistant Moundalek Sarah, local production The Film House, special thanks National Museum of QatarPhotography Ester Theaker, Styling Makram Bitar

#The Arabian fashion initiative supporting young and emerging designers

[americacryous]

America Cryo - Equine Laser Class IV | Equine Laser Therapy Machine

We now offer a non-surgical, drug free treatment option for horse’s pain. Deep tissue laser therapy has the power to eliminate or significantly reduce horse’s pain. Treatments take just a few minutes, however, the therapeutic effect continues to soothe and heal long after treatment. There is no discomfort during treatment, simply a deep, gentle warmth as the horse body’s cells respond to the light.

Benefits:-

Relieves acute and chronic pain

Increases the speed, quality and tensile strength of tissue repair

Increases blood supply

Stimulates the immune system

Stimulates nerve function

Develops collagen and muscle tissue

Helps generate new and healthy cells and tissue

Promotes faster wound healing

Reduces inflammation

Laser therapy can be used for the following:

1. Pain Management

2. Wound healing

3. Post surgical Healing

4. Rehabilitation

5. Nerve Regeneration

6. Inflammatory Diseases

7. Acute Musculoskeletal Trauma

Laser type

GaAs diode laser

Laser wavelength

980nm

Laser mode

Multi mode

Output power

0.5- 10W (980nm)

Divergence angle

≤ 25 mrad

Power instability

≤ ± 10%

Aiming beam

650nm red diode laser, 3mW.

Delivery system

Support the fiber with diameter of 200μm, 400μm, 600μm,800μm fibers.

Standard configuration

400um fiber treatment handpiece (disposable fiber head), beam expand raying head for whitening.

Operation and control

Color touch screen, microcomputer control.

Display

7" resistance-type true color touch

Operation mode

Continuous output, repeated pulse output

T on

25μs ~ 1000ms

T off

25μs ~ 1000ms

Frequency

20,000 Hz

Cooling system

TEC semiconductor cooling, heat pipe air cooling

Battery

Li-battery 4700mAh(8hours standby time, 2hours continuous working time)

Main body input voltage

DC 12V~17V

Input power

AC110V ~ 220V ± 20% 50Hz ~ 60Hz ± 1Hz

Battery input voltage

DC 18V~19.5V

Ambient temperature

5~40 ℃

Relative humidity

No more than 80%

Dimensions

200×120×60(mm)

Net weight

1.5 kg

Sold for animal use only. Results may vary. The equine laser is a class IV therapeutic laser with power up to 10 watts.. Note: Before using or buying any therapy equipment for your animal, or administering any treatment, you should consult with a licensed veterinarian first. Even though thousands of clinical applications using low level lasers have been favorable, no claims can be made on its health benefits or anticipated outcome of treatment. When you buy any laser from this site or from the owner of this site (using PayPal, Google Checkout, by phone, mail or any other means) you agree to never use these lasers in public. The buyer assumes full responsibility for their actions in the use of the lasers sold here. State and or Federal Laws may apply when using lasers. It is up to the buyer of any laser sold here to comply with these laws. For Veterinary Use Only. Federal Law prohibits the distribution of this device for human use. Not sold where prohibited.

Please Read Before Buying The equine  Class IV Laser.

The purchaser and/or user of any and all of the lasers and other products sold on this site are fully responsible for their actions in the use, in any way, of the laser and products.  The purchaser and/or user of any and all of these lasers and other products on this site, www.americacryo.com understands and agrees to these terms before they buy, or, in any way, use these products for any reason whatsoever.  The buyer of these products understands and agrees that the lasers sold here are sold for and intended for animal use only.

Attention:  Users of the class IV laser product sold here on this site shall purchase the ANSI Z136.1 laser safety standard form from www.ansi.org and implement the required safeguards and training of ANSI Z136.1 before using this Class IV laser product.

#Ice compression machine #shoulder ice wrap #ice therapy machine #Cold Laser Therapy Device #knee ice wraps #ankle compression wrap #cold therapy products #Cold compression therapy #extracorporeal shockwave therapy #cold compression therapy shoulder #best ice compression knee wrap #equine shockwave machine #shoulder cryotherapy machine #best equine laser therapy #knee cryotherapy machine #laser treatment for horses #horse shockwave therapy machine #equine cryotherapy equipment #equine laser therapy machine #compression shoulder ice wrap #pain relief laser therapy device #equine therapy machines #horse therapy equipment #cryo knee wrap #cold compress for pain #cooling leg wraps for horses #radial wave therapy

[nextlevelinjuryandpostoprecovery]

America Cryo - Equine Laser Class IV | Equine Laser Therapy Machine

We now offer a non-surgical, drug free treatment option for horse’s pain. Deep tissue laser therapy has the power to eliminate or significantly reduce horse’s pain. Treatments take just a few minutes, however, the therapeutic effect continues to soothe and heal long after treatment. There is no discomfort during treatment, simply a deep, gentle warmth as the horse body’s cells respond to the light.

Benefits:-

Relieves acute and chronic pain

Increases the speed, quality and tensile strength of tissue repair

Increases blood supply

Stimulates the immune system

Stimulates nerve function

Develops collagen and muscle tissue

Helps generate new and healthy cells and tissue

Promotes faster wound healing

Reduces inflammation

Laser therapy can be used for the following:

1. Pain Management

2. Wound healing

3. Post surgical Healing

4. Rehabilitation

5. Nerve Regeneration

6. Inflammatory Diseases

7. Acute Musculoskeletal Trauma

Laser type

GaAs diode laser

Laser wavelength

980nm

Laser mode

Multi mode

Output power

0.5- 10W (980nm)

Divergence angle

≤ 25 mrad

Power instability

≤ ± 10%

Aiming beam

650nm red diode laser, 3mW.

Delivery system

Support the fiber with diameter of 200μm, 400μm, 600μm,800μm fibers.

Standard configuration

400um fiber treatment handpiece (disposable fiber head), beam expand raying head for whitening.

Operation and control

Color touch screen, microcomputer control.

Display

7" resistance-type true color touch

Operation mode

Continuous output, repeated pulse output

T on

25μs ~ 1000ms

T off

25μs ~ 1000ms

Frequency

20,000 Hz

Cooling system

TEC semiconductor cooling, heat pipe air cooling

Battery

Li-battery 4700mAh(8hours standby time, 2hours continuous working time)

Main body input voltage

DC 12V~17V

Input power

AC110V ~ 220V ± 20% 50Hz ~ 60Hz ± 1Hz

Battery input voltage

DC 18V~19.5V

Ambient temperature

5~40 ℃

Relative humidity

No more than 80%

Dimensions

200×120×60(mm)

Net weight

1.5 kg

Sold for animal use only. Results may vary. The equine laser is a class IV therapeutic laser with power up to 10 watts.. Note: Before using or buying any therapy equipment for your animal, or administering any treatment, you should consult with a licensed veterinarian first. Even though thousands of clinical applications using low level lasers have been favorable, no claims can be made on its health benefits or anticipated outcome of treatment. When you buy any laser from this site or from the owner of this site (using PayPal, Google Checkout, by phone, mail or any other means) you agree to never use these lasers in public. The buyer assumes full responsibility for their actions in the use of the lasers sold here. State and or Federal Laws may apply when using lasers. It is up to the buyer of any laser sold here to comply with these laws. For Veterinary Use Only. Federal Law prohibits the distribution of this device for human use. Not sold where prohibited.

Please Read Before Buying The equine  Class IV Laser.

The purchaser and/or user of any and all of the lasers and other products sold on this site are fully responsible for their actions in the use, in any way, of the laser and products.  The purchaser and/or user of any and all of these lasers and other products on this site, www.americacryo.com understands and agrees to these terms before they buy, or, in any way, use these products for any reason whatsoever.  The buyer of these products understands and agrees that the lasers sold here are sold for and intended for animal use only.

Attention: Users of the class IV laser product sold here on this site shall purchase the ANSI Z136.1 laser safety standard form from www.ansi.org and implement the required safeguards and training of ANSI Z136.1 before using this Class IV laser product.

#cooling leg wraps for horses #cold compress for pain #cold compress for wrist pain #cold laser therapy equipment #cold therapy products #magnetic hock wraps for horses #pain relief laser therapy device #best ice compression knee wrap #equine therapy devices #equine ice wraps #equine therapy equipment #equine massage equipment #laser treatment for horses #equine cryotherapy equipment #equine shockwave therapy machine #veterinary shock wave therapy #shockwave machine for horses #horse massage machine #equine laser therapy machine #horse shockwave therapy machine #knee cryotherapy machine #best equine laser therapy #shoulder cryotherapy machine #equine shockwave machine #cold compression therapy shoulder

[yaaninsulation]

Brief Introduction of Nomex Insulation Paper(NMN)

Nomex insulation paper, it is characterized by good heat resistance and high strength. At a temperature of 250°C, the material properties can remain stable for a long time. Its acupuncture products are mainly used as high-temperature filter materials and insulating materials. Wherever electrical insulation is required, you can usually see NOMEX products. It has a unique and appropriate balance of performance. For many years, it has been widely used in transformers, motors, generators and other electrical equipment to improve electrical insulation reliability.

Main features of the Nomex insulation paper

he unique combination of performance makes NOMEX products have excellent characteristics: Nomex insulation paper(NMN)  is a synthetic aromatic amide polymer with the following excellent characteristics: 1, Intrinsic dielectric strength The calendered NOMEX can withstand short-term voltage field strength of 18～40KV/mm, without further treatment with varnish and resin Due to the low dielectric constant of Nomex insulation paper(NMN) , the electric field distribution between the insulating and cooling medium is more uniform 2, Mechanical toughness The product has very high strength, good elasticity, tear resistance and abrasion resistance, and the thinner product is flexible; 3, Thermal stability 4, The product has the approval of UL material temperature class 220°C, which means that it can maintain effective performance for more than 10 years even if it is continuously placed at 220°C; It is basically not affected by most solvents, and is very resistant to acid and alkali corrosion. It is also compatible with all varnishes, adhesives, transformer fluids, lubricating oils and cooling agents. In addition, NOMEX; will not be destroyed by insects, fungi and molds 5, Low temperature performance At the boiling point of nitrogen (77K), the tensile strength of NOMEX insulating paper exceed the strength value at room temperature; 6, Insensitive to moisture When the relative humidity is 95%, its dielectric strength is 90% of that in a completely dry state. At the same time, many mechanical properties are actually improved; 7, Radiation resistant Even if the intensity of ionizing radiation reaches 800 Mrads (8 Mgrays), NOMEX® products are basically unaffected, and they still maintain their mechanical and electrical properties after 8 times of radiation of this dose

Application of the Nomex insulation paper

NOMEX products can be used in various types of transformers (including open ventilated dry type, cast coil type and liquid-filled type): wire winding, layer isolation edge, section and box insulation, winding end packing, isolation Plates and spacers, etc. In open ventilated dry type (OVDT) transformers, the design of this type of transformer can be greatly improved, reducing power loss, improving standby capacity, increasing safety and reliability, and reducing the amount of steel used in conductors and cores, thereby reducing size and reducing cost Nomex insulation paper is widely used in motors and generators, for slot wedge insulation, phase insulation, end laminates, etc. Make all kinds of rotating equipment (AC and DC motors, random coils and die wire windings, and even large steam turbine generators) better heat insulation, better mechanical properties, higher safety, and longer service life. As a professional insulation material manufacturer, YAAN specializes in manufacturing electrical insulation materials for almost 34 years. Yanan provide the most complete nomex insulation paper to the worldwide customers

#insulation #motor #transformer #electric insulation

[anthonyindustries]

The Trijicon Tenmile 6-24x50 long-range riflescope is designed to reach out and touch your targets at extreme distances. Its also built with extreme durability, as its tested to military standards and protocols. Featuring a daylight bright MRAD Ranging reticle with an illuminated LED dot, you will enjoy a pinpoint aiming solution in any condition. So when youre ready to engage at extreme range, choose the Tenmile 6-24x50 long-range riflescope. Product Specification ::: Adj Size: .1 MRAD; Coating Type: Fully Multi-Coated; Eye Relief: 3.10-3.90; Field of View: 19-4.70 ft @ 100 yds; Finish: Illuminated Red LED Dot/MRAD Ranging; Length: 14.45; Magnification: 6-24x; Objective: 50mm; Tube Diameter: 30mm; Weight: 24.90 oz; https://anthonysfirearmwarehouse.com/trj3000005-tenmile-sfp-6-24x50-led-dot-red

[ezcad2]

2 Axis Laser Galvo Scanner GO7 Series China

High Precision 2D Laser Galvo Scanner Head with X Y Axis for Laser Marking, Etching, Engraving, Cutting, Welding...

GO7 series digital laser galvo scanner head was launched by JCZ in 2016, with competitive price, high stability, and low repair rate, widely used for laser machines for marking, etching, engraving, welding, cutting... It with various optional mirror size (8mm,10mm,12mm,14mm,16mm,20mm...) and coated with wavelength (355,532,1064,10600nm ) for lasers like fiber, CO2,YAG,UV,Green...

Product Pictures

FAQs

Specifications

Model: GO7 Series Wavelength 355nm,532nm,1064nm,10600nm... Interface XY2-100 Input Aperture(mm) 8 10 12 14 16 20 Dynamic Performance Tracking Error Time(ms) 0.18 0.22ms 0.36 0.38 0.4 0.4 Repeatability(urad) ＜22 ＜22 ＜22 ＜22 ＜22 ＜22 Gaindrift(ppm/K) 80 80 80 80 80 80 Offsetdrift(urad/K) 30 30 30 30 30 30 1% of full scale(ms) 0.25 0.3 0.4 0.65 0.7 0.8 10% of full scale(ms) 0.7 0.8 1.2 1.6 1.7 1.8 Non-Linearity(mrad) ＜0.9 ＜0.9 ＜0.9 ＜0.9 ＜0.9 ＜0.9 Long term Drift over8 hours(mrad) ＜0.3 ＜0.3 ＜0.3 ＜0.3 ＜0.3 ＜0.3 Typical Speed Marking speed(mm/s) 4000 3000 2500 2200 2000 1300 Positioning speed(m/s) 15 12 10 8 7 6 Optical Performance Typical Deflection(rad) ±0.39 ±0.39 ±0.39 ±0.39 ±0.39 ±0.39 Gain error(mrad) ＜5 ＜5 ＜5 ＜5 ＜5 ＜5 Zero Offset(mrad) ＜5 ＜5 ＜5 ＜5 ＜5 ＜5 Operating Temperature(℃) 10-40 10-40 10-40 10-40 10-40 10-40 Storing Temperature(℃) -20-60 -20-60 -20-60 -20-60 -20-60 -20-60 Power Requirements ±15VDC,3A ±15VDC,3A ±15VDC,3A ±15VDC,3A ±15VDC,3A ±15VDC,3A Weight(kg) 1.5 1.9 2 2.4 2.6 4.3 GO7-10mm Scan Head GO7-12mm Scan Head GO7-14mm Scan Head GO7-16mm Scan Head GO7-20mm Scan Head GO7-10mm Scan Head

GO7-12mm Scan Head

GO7-14mm Scan Head

GO7-16mm Scan Head

GO7-20mm Scan Head

Read the full article

#GalvoScannerHead

[rayclouds-blog1]

Blue Light Measurement Device

LES-1000 Blue Light Analyzer is specifically for the current LED applications in the development of optical radiation safety issues integrated high efficiency, high-precision test platform, integrated scientific grade CCD 2D luminance test system, high-precision high dynamic range array spectrum radiation analyzer, 16-bit high-precision instantaneous digital photometer, with LES-1000 dedicated test and analysis software can analyze the measurement of LED light biosafety parameters, evaluate light biological safety level accurately and quickly.

Blue Light Measurement Device Characteristic

Professional: for the LED characteristics, according to the latest requirements of IEC/EN62471, IEC 62471-2, IEC 62778 and GBT20145;

Overall: provide integrated solutions of spectral irradiance, spectral radiance, apparent brightness and instantaneous light characteristics;

Meticulous: ultra-mega pixel resolution high sensitivity high-precision scientific grade CCD, Hamamatsu original imported sensor, high precision 16 ADI professional ADC;

Efficiency: the maximum time to measure is no more than 40s;

Patent technology, independent R&D

Blue Light Measurement Device Specification

LES-1000 Blue Light Analyzer

Non-cross C-T mechanism of high precision array spectrum test platform

Spectral range

200nm-800nm，360-830nm，380nm-1000nm，200nm-3000nm

（A custom external spectrometer）optional

Spectral interval

1nm

Wavelength

accuracy

0.3nm

Max. Dynamic range

100,000：1

Sciencegrade 2D

array CCD

Ultra-mega pixel resolution 1360×1200，Pixel size 6.5μm×6.5μm

Measurement

diameter

7mm，Meet all exposure conditions

Measurement Angle

Include 100 mrad,11mrad,1.7mrad，meet standard requirements

Instantaneous measurement

characteristic

2μs Interval fast sampling，ADI Original 16 bit high precision, high resolution ADC

Support for pulse luminescence measurement

 https://www.rayclouds.com/products/blue-light-measurement-device/

#Blue #light #measurement

[caucuskollektiv]

Being one of the first DJs and producers to play underground music at clubs and radio stations in the MENA region, Gunther is a force to be reckoned with. In 2004, he forever marked the nightlife scene in the country. He says underground music is not easy, for it claims your mind and marks you. Gunther proves his point by delivering an exclusive set for la Radio Kollektiv

Having a varied selection, we asked Gunther to share a track for this week’s #CaucusKollekts: “Hug” by Lakosta 🕺🏻

CK: Having been in the scene since the beginning, what are some big changes you’ve seen?

A lot of people presume that I’ve been in the scene since the beginning, and that’s not true. I’ll be posting a video soon commenting on the scene.

The first ones to arrive were Hitman, Bad Boy, Rodge, Said Mrad, RIP Rap Bass, RIP Sweet Little DJ, Pierre Nawfal, Jihad and the guys, Jade, and many more. They were in the scene ten years before me. I technically was a part of the second wave of DJs and producers in the country. On the other hand, I was fortunate to have a good career, and that was because I was the first pianist and had studied music theory. I came from a musical background, grew up in a family of musicians. Music is my passion, not my job. So I’m not the first but I can tell you that passion is what changed. Before the DJ used to be a normal person who was in touch with music long before there were any drugs. Today some people just pop a pill and decide to be DJs. A DJ was a shy guy who didn’t speak with anyone and focused on the music. Today the lights shine on you, you have to be social, pictures and videos are taken, it’s different. Today’s DJs are like pop stars, they do it for the fame, not the passion. Back when I first started, being an artist was our escapatoire from war, we were FOR the society. Today the scene is a part of the system. It’s very controlled. These changes are because of social media. We used to be popular without Facebook and social media. Until today I haven’t sponsored anything on Instagram, I have organic followers. Moreover, music theory changed, attitudes, education levels, musical backgrounds, and technology. It may look easier to be a DJ and producer but it’s not easy. Bring any new DJ an old mixing machine and he won’t mix properly.

CK: You’ve also had the opportunity to play with many international DJs, what was your favorite gig?

G: I can’t really say that one specific event was my favorite. I’ve played with 90% of DJs, from Classes A, B and C. Some were good, some were bad. I like to listen to strong DJs. For example, I can’t find myself listening to trance music, but I listen to Armin Van Buuren and Paul Van Dyk because they’re masters in what they do. It’s all about frequencies at the end of the day, there were a lot of great nights. I don’t think the DJ is the essential part of the night, it’s the mood and the people. Unfortunately if the party fails they blame it on the DJ.

CK: The number of newcomers to the scene is on the rise, what’s your advice for them?

G: I’d tell them to stop being DJs, but not to give up on music. There’s a high probability that in 10 years DJs won’t be around anymore. Go towards music production, it’s the future. Build yourself a career. In the past, when we wanted to create music, we had to use a bunch of machines, play instruments or feature musicians and singers. Today, one guy can do all of that. If I were to start from scratch today for example, it would be impossible for me to achieve what I have again, it’s very hard to be successful in this country’s art industry. Everyone knows everyone so they won’t give you the value you deserve.

CK : We heard you were pretty old school in your mixing, what are some techniques you think are slept on?

G: That’s a great question. I think the technology is slept on. Nowadays DJs look at technology the bad way. Today’s DJs rely on the Mixed In Key software. It’s important to rely on your own ear. Mixed In Key won’t tell me what to play, it will tell me what not to play. Just because two tracks are harmonic, it doesn’t necessarily mean they work together. It’s the style and mood of the song you have to pay attention to. Old schoolers on the other hand don’t wanna learn how the new stuff works, they’re resisting it. Today’s generation looks for the easy way, old generations don’t want to evolve. Both are wrong.

CK : You’ve achieved a lot throughout your life and have a very rich portfolio, what’s another achievement you’ve set your eyes on?

G: My ultimate goal is to make beautiful things in many fields. I did all the charts in my career, but that was not my objective. When someone asks me if I’m a DJ I say no. I’m a pianist, I’ve composed for the likes of Mercedes and Gillette. I’d like to possess more than one establishment leaning more towards visual entertainment, something mature and reserved, not related to the techno scene.

CK: Creativity is a long process, what are your key rules?

G: I believe creativity comes from your education, your environment, the food you’re eating, the things you see and hear. Anything might take you on a trip. Sometimes I’d suddenly wake up and go to the studio to start working. I personally start with the name of the track, it’s situation, and then I find myself in the studio, writing the song. I invite you to check my catalog on Beatport, search the meaning of my music’s titles and listen to it again. You’ll perceive it differently. In my experience, I produce best when sad. I’m a very emotional person, I read a lot and I’m always on the news. Now I have two albums in which I tell a story. Everything in your life could lead you to creativity. There’s not one thing that helps you create art.

#LaRadioKollektiv