#cdp | Explore Tumblr Posts and Blogs

axvoter · 1 year

Text

Blatantly Partisan Party Review VI (NSW 2023): Group G (Silvana Nile / Revive Australia Party)

Prior reviews (as the Christian Democratic Party): federal 2013, federal 2016, NSW 2019, federal 2019

What I said before: “The CDP sees no place in society for people who think, behave, or believe differently to them. Unless you worship the strict, narrowly-defined, judgemental, petty god to whom the CDP claims allegiance, this party is not for you.” (federal 2019)

What I think this year: This is all just a little bit weird really. Fred Nile was first elected to the NSW Legislative Council in 1981 for the Call to Australia Party, the predecessor of the Christian Democratic Party. He has been in the NSW parliament for over 40 years now; he is 88 years old. He secured the election of his first wife alongside himself for 14 years, the late Elaine Nile, and his second wife Silvana is running this year.

Perhaps unsurprisingly, Fred announced his retirement in 2021, endorsing Lyle Shelton as his successor. But then he rescinded the deal (eat shit Lyle) and has served out his term. The CDP dissolved in 2022 and Nile joined Seniors United, but it too has been dissolved. He again announced his retirement in October 2022, but—you can see where this is going—announced last month that he’d stand again. Weirdly, he’s the second candidate to his wife Silvana, and they are the only two candidates in Group G. They do not get a square above the line (you need 15 candidates for that) and even if they had a square above the live and Silvana won election, there’s no chance they’d get a high enough vote for Fred to win a seat from second place. Why is he going out on a loss rather than retiring with dignity? Strange stuff.

Anyway, don’t vote for the Niles, they’re awful bigots. I would say they’ve leapt on the latest bandwagon of bile against drag queens, but Fred’s been pulling that particular wagon since he came to prominence as an opponent of Mardi Gras in the 1980s. Forty years down the track and he has not become a better person.

Recommendation: Give Group G (Silvana Nile / Revive Australia Party) a weak or no preference.

Website: https://www.facebook.com/fnileindp/

#auspol #NSWvotes #NSWvotes2023 #NSW #Election 2023 #NSW election #Fred Nile #Christian Democratic Party #CDP #Revive Australia Party #Silvana Nile #Revive Australia #fundamentalists #weak or no preference

6 notes · View notes

nile-archer · 1 year

Text

Nile Archer's Blog: Marketing Insights

Is streamlining fan user data the most effective way to generate effective marketing campaigns for Sports?

The NBA has entered into a multi-year, league-wide partnership with the fan engagement platform StellarAlgo, according to a press release. The league has also taken an equity stake in the company, which was founded in 2016.

In 2017, the LA Kings (AEG) partnered with StellarAlgo a customer data platform (CDP) that helps organizations in the sports and entertainment industry improve their fan engagement strategies. It uses data analytics and machine learning algorithms to identify and target high-value fans, personalize marketing messages, and optimize ticket sales and revenue. The platform also provides insights on fan behavior, preferences, and demographics, which can help organizations make data-driven decisions to enhance the fan experience and increase fan loyalty. StellarAlgo's clients include professional sports teams, college athletics programs, and live entertainment venues.

Approximately, 72% of consumers only engage with marketing messages that are personalized to their interests according to ProemSports.com

Personalized messages feel more relevant, valuable, and tailored to their specific needs and preferences. Personalization allows marketers to create more targeted and relevant messages that are tailored to each individual's interests, behaviors, and preferences. When consumers receive messages that are personalized to their needs, they are more likely to pay attention and engage with the message, leading to higher response rates, conversions, and sales.

Furthermore, personalized messages help to build stronger relationships between consumers and brands. When consumers feel that a brand understands their needs and preferences, I feel like they are more likely to trust and be loyal to that brand over time.

youtube

#Youtube #CDP #sports

2 notes · View notes

getoncrm · 1 year

Link

GetOnCRM can help you unlock your business's potential with Salesforce CDP! This cutting-edge technology helps you make intelligent decisions, allowing you to stay ahead of the competition and reach success.

#salesforce #salesforcecdp #cdp #salesforcepartners #GetOnCRM

6 notes · View notes

marmedes · 1 year

Photo

Igni w płynie 🔥 🔥 🔥 - butelka inspirowana ognistym znakiem Wiedźmińskim. Idealny prezent nie tylko na Święta, ale na każdą okazję. #thewitcher #thewitcher3 #wiedzmin #wiedźmin #thewitcher3wildhunt #thewitcherworld #fanart #butelka #handmade #eliksir #potion #cdp #cdprojektred #cosplay #vesemir #geralt #geraltofrivia #ciri #fantasy #fantastyka #games #game #thewitcher4 #ig https://www.instagram.com/p/CmKINZOKX4f/?igshid=NGJjMDIxMWI=

2 notes · View notes

neto-something · 1 year

Text

CCNA Exercise 14: Cisco Router and Switch Basics

Objective: Verify Cisco Discovery Protocol (CDP) and analyze the effects of interface speed and duplex configuration

R1 is a router. The FastEthernet0/0 (F0/0) interface has an IP address of 10.10.10.1/24 which connects into the FastEthernet0/1 (F0/1) interface on SW1 (which is the switch). The /24 tells us the subnet mask is 255.255.255.0, this is called the CIDR value R2 is also a router. The FastEthernet0/0 (F0/0) interface has an IP address of 10.10.10.2/24 which connects into the FastEthernet0/2 (F0/2) interface on SW1 (which is the switch). The /24 tells us the subnet mask is 255.255.255.0 > denotes you’re in user exec mode # denotes you’re in privileged exec mode (config)# denotes you’re in global configuration mode Configure Router 1 with hostname of R1 enable - enter privileged exec mode config t - enter global configuration mode. Full command is configuration terminal. I just shortened it here, which you can do for every command! hostname r1 - renaming the router to “r1″. Command is hostname [the name you want]

Configure Router 2 with hostname of R2 enable - enter privileged exec mode config t - enter global configuration mode hostname r2 - renaming the router to “r2″

Configure switch 1 with hostname of sw1

enable - enter privileged exec mode config t - enter global configuration mode hostname sw1 - renaming the switch to “sw1″

Configure FastEthernet0/0 (F0/0) with an IP address of 10.10.10.1/24 on R1 enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/0 - stepping inside the fastethernet0/0 interface ip address 10.10.10.1 255.255.255.0 - giving f0/0 an IP address of 10.10.10.1 and a subnet mask of 255.255.255.0. Command is ip address [ip address you want] [subnet mask] no shutdown - by default all interfaces are not enabled. This command brings them up

We can verify we configured it correctly by running the show ip interface brief command or show interface [interface name] command. Show commands cannot be run when you’re in the configuration terminal mode

Also see that FastEthernet0/1 is down/down? That’s the default state of interfaces Configure FastEthernet0/0 on R2 with an IP address of 10.10.10.2/24 enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/0 - stepping inside the fastethernet0/0 interface ip address 10.10.10.2 255.255.255.0 - giving f0/0 an ip address of 10.10.10.2 and a subnet mask of 255.255.255.0. Command is ip address [ip address you want] [subnet mask] no shutdown - by default all interfaces are not enabled. This command brings them up

Verifying with show ip interface brief and show interface commands

Give SW1 the management IP address 10.10.10.10/24 Note: Management IP addresses on switches are configured on the VLAN1 interface. The management IP address is used to connect to the switch (via ssh, etc) to manage the switch. When we configure the VLAN, it is called the switched virtual interface. /24 tells us the subnet mask is 255.255.255.0 enable - enter privileged exec mode config t - enter global configuration mode interface vlan1 - stepping inside the vlan1 interface ip address 10.10.10.10 255.255.255.0 - giving the vlan1 interface an IP address of 10.10.10.10 and a subnet mask of 255.255.255.0. Command is ip address [ip address you want] [subnet mask] no shutdown - enabling the vlan1 interface, by default interfaces are not enabled The switch should have connectivity to other subnets via R2 I didn’t understand this at first because I was like, there are no other subnets? But that didn’t matter and really it’s telling us that the switch should be able to reach other subnets (sub networks, other networks) via R2. Don’t know why I wasn’t understand it! But how do devices reach outside their network? Why through the default gateway of course~ So basically I need to set the switch’s default gateway to 10.10.10.2 because this is the IP address of the FastEthernet0/0 interface on R2 which the switch (SW1) is directly connected to!

So in SW1... enable - enter privileged exec mode config t - enter global configuration mode ip default-gateway 10.10.10.2 - setting the default gateway to 10.10.10.2

Verifying SW1 is able to ping 10.10.10.2 ping 10.10.10.2

Also, made a mistake here. I tried pinging while I was in the enter global configuration mode, forgot you can’t do that. I had to exit and get back to the privileged exec mode or user exec mode On SW1, verify that speed and duplex are automatically negotiated to 100 Mbps full duplex on the link to R1

R1 connects to the FastEthernet0/1 interface on SW1. The command to view details of an interface is show interface [interface name] enable show interface fastethernet0/1

As you can see in the highlighted text above, we ran the command show interface fastethernet0/0 and we can see “Full Duplex, 100Mb/s” So the duplex is set to Full and the speed is set to 100Mbps Manually configure full duplex and FastEthernet speed on the link to R2 R2 connects to the FastEthernet0/2 interface on SW1. So we need to configure FastEthernet0/2. The command to set the duplex is duplex [full, half], the command to set the speed is speed [10, 100, 1000]. enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet 0/2 - stepping inside the fastethernet0/2 interface duplex full - setting the duplex to full speed 100 - setting the speed to 100mbps

When we changed the duplex to full on the FastEthernet0/2 interface, the connection dropped! But why? After being puzzled for a bit I remembered that when you manually configure an interface, you must manually configure the other side! The other side being the FastEthernet0/0 interface on R2 that SW1 is directly connected to.

So hopping on R2 you can see the message, “... interface fastethernet0/0, changed state to down” I ran the show ip interface brief command just to confirm, and yep, it’s down

But why does it also say “up” under “Status”? Well that’s because we enabled the interface by running no shutdown on it! The interface is enabled but the link is down. To bring it back up, we gotta manually configure it just like we did on SW1.

enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/0 - stepping inside the interface duplex full - setting the duplex to full speed 100 - setting the speed to 100Mbps

And as you can see above, the FastEthernet0/0 interface came back up as soon as we set the duplex to full What version of IOS is the switch running? Two things come to mind, we can either run reload on the switch to restart the switch, which then will show us the version or we can run show cdp neighbors detail on any other connected device. Let’s do both? Restarting the switch

Running show cdp neighbors detail on R2

Also, I cheated a google’d another way and yeah, you can run show version on the switch itself too!

Verify the status of the switch port connected to R2 with the show ip interface brief command. It should show status and protocol up/up.

Verify the directly attached Cisco neighbors using Cisco Discovery Protocol So I guess we have run show cdp neighbors detail on all devices! Running show cdp neighbors detail on R1

Running show cdp neighbors detail on SW1

Running show cdp neighbors detail on R2

Prevent R1 from discovering information about Switch 1 via CDP There are two commands to disable Cisco Device Protocol (CDP), no cdp run is to disable it globally, no cdp enable is to only disable it on a specific interface, but you have the step inside the interface first. Since R1 is connected to SW1 on FastEthernet0/1, we’re going to run no cdp enable on the FastEthernet0/1 interface on SW1 enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/1 - stepping inside the interface no cdp enable - disabling cdp from running on this interface, which prevents R1 from using CDP to discover SW1

Flush the CDP cache on R1 by entering the ‘no cdp run’ then ‘cdp run’ commands in global configuration mode and then verify R1 cannot see SW1 using CDP enable - enter privileged exec mode config t - enter global configuration mode no cdp run - disabling cisco device protocol (cdp) cdp run - enabling cisco device protocol (cdp) exit - exiting global configuration mode show cdp neighbors detail - discovering devices using cisco device protocol

Since we’re making a change on the router, we have to enter the global configuration mode. Once we ran the cdp commands we exited out of global configuration mode to run the show cdp neighbors detail command and R1 wasn’t able to find anything Verify the status of the switch port connected to R2 with the show ip interface brief command. It should show status and protocol up/up

Shut down the interface connected to R2 and issue a show ip interface brief command again. The status and protocol should show administratively down/down enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/2 - stepping inside the fastethernet0/2 interface shutdown - shutting down the fastethernet0/2 interface exit - getting out of the interface exit - getting out of the global configuration mode show ip interface brief

I exited out of the configuration modes because we can’t run the show commands while we’re in there Bring the interface up again. Verify the speed and duplex setting

Duplex is set to Full and speed is 100Mbps Set the duplex to half on Switch 1. Leave the settings as they are on R2 and verify the state of the interface enable - enter privileged exec mode config t - enter global configuration mode interface fastethernet0/2 - stepping inside the fastethernet0/2 interface duplex half - setting the duplex to half exit - getting out of the interface exit - getting out of the global configuration mode show ip interface brief

After changing the duplex to half on the FastEthernet0/2 interface on SW1, the connection dropped! And just like before, this happened because by default the duplex and speed are set to auto negotiate and when you manually configure an interface you must manually configure the other side as well! Set the duplex back to full duplex and set the speed to 10. Check if device is still operational enable - enter privileged exec mode config t - enter global configuration mode duplex full - setting the duplex to full. Only options here are full or half speed 10 - setting the speed to 10. Options here are 10, 100, or 1000 in Mbps exit - getting out of the interface exit - getting out of global configuration mode show ip interface brief

The FastEthernet0/2 interface is showing as down/down Check if the interface is operational on R2. What is the status of the interface

The FastEthernet0/0 interface on R2 is showing as up/down. Meaning the interface is enabled but the link is down

#ccna #lab #networking #cdp

2 notes · View notes

irislunagames · 1 year

Text

#irislunagames #irisluna.games #irisluna_game #iris #cyberpunk #cyberpunk 77 #screenshot artist #screenshot art #screenshot #gaming photography #virtual photography #female #cdp #cd projekt red #cd project #panam

2 notes · View notes

jukeboxofjellycat · 2 months

Text

#20 de febrero #2024 #day of cat #día internacional del gato #cats 13 #gatunos #gatos #arte #art #kawaii #kawaii art #cute guys 14 #cdp #black cat #gato negro #japan #animation #cartoon #glasses

7 notes · View notes

basic-bamboo · 2 years

Text

Please check out Colorado Doula Project

Colorado is a safe state for abortions and the anti-racist and trans friendly abortion doulas that dedicate their time to CDP will help people from out of state get to Colorado to get an abortion. This includes raising funds for:

Travel

Accommodations

Childcare

Food

Transportation

And more

While you are here to get an abortion

If you do not need an abortion, consider donating to CDP or you local abortion fund.

#abortion #reproductive justice #roe v wade #cdp #Colorado doula project

3 notes · View notes

kurumsalkarbonayakizi · 7 days

Text

📌𝐊𝐚𝐫𝐛𝐨𝐧 𝐀𝐲𝐚𝐤 𝐈̇𝐳𝐢 𝐁𝐚𝐬̧ 𝐃𝐞𝐧𝐞𝐭𝐜̧𝐢 𝐄𝐠̆𝐢𝐭𝐢𝐦𝐢

📌Eğitim İçeriği

* 𝐈𝐒𝐎 𝟏𝟒𝟎𝟔𝟒-𝟏:𝟐𝟎𝟏𝟖 𝐊𝐮𝐫𝐮𝐦𝐬𝐚𝐥 𝐊𝐚𝐫𝐛𝐨𝐧 𝐀𝐲𝐚𝐤 𝐈̇𝐳𝐢 𝐇𝐞𝐬𝐚𝐩𝐥𝐚𝐦𝐚𝐬ı

* 𝐈𝐒𝐎 𝟏𝟒𝟎𝟔𝟒-𝟑 𝐒𝐞𝐫𝐚 𝐆𝐚𝐳ı 𝐁𝐞𝐲𝐚𝐧𝐥𝐚𝐫ı𝐧ı𝐧 𝐃𝐨𝐠̆𝐫𝐮𝐥𝐚𝐧𝐦𝐚𝐬ı 𝐯𝐞 𝐆𝐞𝐜̧𝐞𝐫𝐥𝐢 𝐊ı𝐥ı𝐧𝐦𝐚𝐬ı

* 𝐈𝐒𝐎 𝟏𝟗𝟎𝟏𝟏 :𝟐𝟎𝟏𝟖 𝐘𝐨̈𝐧𝐞𝐭𝐢𝐦 𝐒𝐢𝐬𝐭𝐞𝐦𝐥𝐞𝐫𝐢𝐧𝐢 𝐃𝐞𝐧𝐞𝐭𝐥𝐞𝐦𝐞 𝐊ı𝐥𝐚𝐯𝐮𝐳𝐮

* 𝐒ı𝐧ı𝐫𝐝𝐚 𝐊𝐚𝐫𝐛𝐨𝐧 𝐃𝐮̈𝐳𝐞𝐧𝐥𝐞𝐦𝐞 𝐌𝐞𝐤𝐚𝐧𝐢𝐳𝐦𝐚𝐬ı

📌Eğitim Konusu: Karbon Ayak İzi Baş Denetçi Eğitimi

📅Eğitim Tarihi: 𝟏𝟖-𝟏𝟗 𝐌𝐀𝐘𝐈𝐒 - 𝟐𝟓-𝟐𝟔 𝐌𝐀𝐘𝐈𝐒 - 𝟐 𝐇𝐀𝐙𝐈̇𝐑𝐀𝐍 𝟐𝟎𝟐𝟒

🕤Saat Aralığı: 𝟏𝟎:𝟎𝟎 - 𝟏𝟕:𝟎𝟎 𝐚𝐫𝐚𝐬ı

🏢Eğitim ve Sınav Lokasyonu: Online Eğitim

Eğitmen: 𝐍𝐢𝐫𝐚𝐧 𝐀𝐫𝐦𝐮𝐭𝐜̧𝐮

𝗘𝗴̆𝗶𝘁𝗶𝗺 𝗨̈𝗰𝗿𝗲𝘁𝗶: 𝟏𝟎.𝟎𝟎𝟎𝗧𝗟+𝗞𝗗𝗩+𝐒𝐈𝐍𝐀𝐕 𝐔̈𝐂𝐑𝐄𝐓𝐈̇

0 notes

karbonayakizi · 30 days

Text

𝐒ı𝐧ı𝐫𝐝𝐚 𝐊𝐚𝐫𝐛𝐨𝐧 𝐃𝐮̈𝐳𝐞𝐧𝐥𝐞𝐦𝐞𝐬𝐢 𝐌𝐞𝐤𝐚𝐧𝐢𝐳𝐦𝐚𝐬ı (𝐒𝐊𝐃𝐌) 𝐤𝐚𝐩𝐬𝐚𝐦ı𝐧𝐝𝐚 𝐲𝐚𝐩ı𝐥𝐚𝐧 𝐊𝐚𝐫𝐛𝐨𝐧 𝐄𝐦𝐢𝐬𝐲𝐨𝐧𝐮 𝐎̈𝐥𝐜̧𝐮̈𝐦𝐮̈ 𝐯𝐞 𝐑𝐚𝐩𝐨𝐫𝐥𝐚𝐦𝐚𝐬ı, 𝐀𝐁'𝐲𝐞 𝐢𝐡𝐫𝐚𝐜𝐚𝐭 𝐲𝐚𝐩𝐚𝐧 𝐮̈𝐥𝐤𝐞𝐥𝐞𝐫𝐝𝐞𝐤𝐢 𝐮̈𝐫𝐞𝐭𝐢𝐜𝐢𝐥𝐞𝐫 𝐯𝐞 𝐢𝐡𝐫𝐚𝐜𝐚𝐭𝐜̧ı𝐥𝐚𝐫 𝐭𝐚𝐫𝐚𝐟ı𝐧𝐝𝐚𝐧 𝐲𝐚𝐩ı𝐥𝐦𝐚𝐬ı 𝐢𝐬𝐭𝐞𝐧𝐞𝐧 𝐛𝐢𝐫 𝐫𝐚𝐩𝐨𝐫𝐥𝐚𝐦𝐚 𝐯𝐞 𝐛𝐢𝐥𝐝𝐢𝐫𝐢𝐦𝐝𝐢𝐫.

Bu durum, özellikle karbon yoğun sektörlerde faaliyet gösteren firmaları etkileyecektir.

SKDM, AB dışından ithal edilen belirli ürünler için geçerlidir ve bu ürünlerin üretimindeki karbon emisyonlarının maliyetini içermesi amacıyla tasarlanmış bir sistemdir.

İthalatçılar, SKDM kapsamındaki ürünleri AB'ye ithal etmek istediklerinde, bu ürünlerin üretimi sırasında ortaya çıkan karbon emisyonlarının miktarına karşılık gelen bir maliyeti karşılamak zorundadır. Sistemin amacı ise AB içindeki üreticiler ile dışarıdan gelen üreticiler arasında adil bir rekabet ortamı yaratmak ve karbon emisyonlarını azaltmaktır.

𝐀𝐁 𝐝ı𝐬̧ı𝐧𝐝𝐚𝐤𝐢 𝐮̈𝐫𝐞𝐭𝐢𝐜𝐢𝐥𝐞𝐫 𝐯𝐞 𝐢𝐡𝐫𝐚𝐜𝐚𝐭𝐜̧ı𝐥𝐚𝐫 𝐒𝐊𝐃𝐌'𝐧𝐢𝐧 𝐠𝐞𝐫𝐞𝐤𝐥𝐢𝐥𝐢𝐤𝐥𝐞𝐫𝐢𝐧𝐢 𝐲𝐞𝐫𝐢𝐧𝐞 𝐠𝐞𝐭𝐢𝐫𝐦𝐞𝐤 𝐯𝐞 𝐢𝐥𝐠𝐢𝐥𝐢 𝐤𝐚𝐫𝐛𝐨𝐧 𝐬𝐞𝐫𝐭𝐢𝐟𝐢𝐤𝐚𝐥𝐚𝐫ı𝐧ı 𝐚𝐥𝐦𝐚𝐤 𝐢𝐜̧𝐢𝐧 𝐤𝐚𝐫𝐛𝐨𝐧 𝐞𝐦𝐢𝐬𝐲𝐨𝐧𝐮 𝐡𝐞𝐬𝐚𝐩𝐥𝐚𝐦𝐚𝐥𝐚𝐫ı𝐧ı 𝐲𝐚𝐩𝐦𝐚𝐥ı 𝐯𝐞 𝐛𝐮 𝐛𝐢𝐥𝐠𝐢𝐥𝐞𝐫𝐢 𝐀𝐁 𝐢𝐭𝐡𝐚𝐥𝐚𝐭𝐜̧ı𝐥𝐚𝐫ı𝐧𝐚 𝐬𝐮𝐧𝐦𝐚𝐥ı𝐝ı𝐫.

𝐒𝐊𝐃𝐌 𝐢𝐥𝐞 𝐢𝐥𝐠𝐢𝐥𝐢 𝐭𝐮̈𝐦 𝐬𝐮̈𝐫𝐞𝐜̧𝐥𝐞𝐫𝐝𝐞 𝐝𝐞𝐬𝐭𝐞𝐤 𝐚𝐥𝐦𝐚𝐤 𝐢𝐜̧𝐢𝐧 QSI BELGELENDİRME LTD.ŞTİ 𝐢𝐥𝐞 𝐢𝐫𝐭𝐢𝐛𝐚𝐭𝐚 𝐠𝐞𝐜̧𝐞𝐛𝐢𝐥𝐢𝐫𝐬𝐢𝐧𝐢𝐳

Detaylı Bilgi Almak İçin; 📞 +𝟗𝟎 𝟑𝟏𝟐 𝟒𝟕𝟐 𝟔𝟎 𝟔𝟕 📧 𝐢𝐧𝐟𝐨@𝐪𝐬𝐢.𝐜𝐨𝐦.𝐭𝐫

0 notes