valvesonly

[valvesonly]

Pressure relief valve manufacturer in Mumbai.

SpecialityValve is the best Pressure relief valve manufacturer in Mumbai. A pressure relief valve helps to maintains the flow of fluids. It always maintain relief in system and keep the pressure down. If the pressure increases the valve automatically open. The main purpose of a pressure relief valve is to protect the life and property of a container.

There are numerous electrical, pneumatic, and hydraulic systems in use today that regulate the pressure, temperature, and flow of fluid systems. Each of these systems needs some kind of power source to function, such as electricity or compressed air. A pressure Relief valve will always be able to work, especially during a power outage when system controls are inoperable. Therefore, the process fluid is the only source of power for the pressure Relief Valve.

What can a pressure relief valve be used for?

Heating and cooling circuits- When using steam, flows may vary considerably with irregular loads, during startup or shutdown, etc. However, even when employing different media, connected boilers, reactors, etc. reactions could result in pressure changes that are unequal to the input from user-controlled equipment such as pumps, heat exchangers, etc. Pressure relief valves can be fitted to help prevent unexpected pressure changes in the heating circuits and to help bring this system to an appropriate level.

Systems with sensitive equipment - Similar damage from high pressure can occur in pneumatic systems with many parts, though usually without any safety-related problems. A pressure relief valve in this situation can prevent premature equipment failure. and can be put in as a part of a maintenance schedule.

Cavitation - Cavitation happens when the pressure in a liquid drops fast below the vapour pressure. When a centrifugal pump is working against a closed system, the pump housing must be vented of excess pressure. Additionally, this results in low pressure zones, which may lead to cavitation.

Advantages of Pressure relief valve

Safeguard the system from overpressure

Reclose and prevent loss of fluid when pressure return back

Reliable and versatile

The Pressure relief valve system installation reduces system component damage.

Industries that use Pressure relief valve

Chemical

Petrochemical

Power

oil and gas 

Description

Body material: Cast iron, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), ductile iron, carbon steel, stainless steel (SS316, SS304, CF8, CF8M)

Size: 1/2” to 60”

Class: 150 to 2500

Nominal Pressure: PN10 to PN450

Ends: Socket weld,Butt weld,Flanged,Threaded

For more visit https://www.specialityvalve.com/product/full-lift-pressure-safety-valve/\



Safety Relief Valve Manufacturer In Mumbai

SpecialityValve is the best Safety relief valve manufacturer in Mumbai. Safety relief valve is a valve that helps in the release of atmospheric pressure, or, to put it another way, it relieves pressure outside of a system. As a result, when the time comes, it will fully open and relieve the pressure, which will prevent an explosion. Wherever the maximum allowable working pressure of a system is likely to be exceeded, safety valves should be installed, especially when another piece of equipment in the system fails.

Why do we need Safety Relief Valve?

A Safety protects the system from over pressure. Over pressure builds when pressure increases the maximum allowable pressure. Safety relief valve opens very quickly is very helpful in preventing malfunctions, fire hazards or explosions.

Do Relief and Safety Valves Perform the Same Function?

Relief Valve are made to regulate pressure in a system, most frequently in fluid or compressed air systems. According to the rise in system pressure, these valves open. As a result, even when the system is somewhat overpressured, they don't fly completely open. Instead, they gradually open, allowing the system to recover to the predetermined pressure level. The valve closes once more when that point is reached.

Safety Valve - They are made to instantly release pressure in the event of an emergency or system failure rather than managing the pressure in a system. Safety valves, as contrast to relief valves, open fully and instantly to prevent a disaster rather than to regulate a system's pressure.

Industries that use safety relief valve

Refineries

Chemical industry

Petrochemical industry

Oil & Gas Industry

Description:

Available materials: Cast iron, Ductile iron, Stainless steel, SS304, SS316, WCB,WCC,WC6, LCB, LCC, SS316L, F55, F53, F51 Size: 1/2” to 60” Class: 150 to 2500 Nominal Pressure: PN10 to PN450

Ends: Butt weld,socket weld,Flanged,Threaded 

For more visit: https://www.specialityvalve.com/product/steam-safety-valve/

#safety valve #safety

[valvesonly]

Pressure safety valve manufacturer in Mumbai

SpecialityValve is the best leading Pressure safety valve manufacturer in Mumbai. A Pressure Safety valve is used to release excess pressure from the system. It is connected and reclose the valve once the excess pressure has been released to prevent further release of the medium once the normal condition has been restored. The pressure safety valve's primary function is to protect the system, people, and the environment. In all circumstances, the pressure safety valve is supposed to function properly. Types of pressure safety valve are low lift pressure safety valve, full lift pressure safety valve.

Instead of routinely maintaining pressure, a pressure safety valve should only be used as a last option to prevent accidents. Pressure safety valves are therefore strictly controlled and have to meet to ASME Code standards.

Due to the significance of a Pressure safety valve, the valve is be able to function at all times and under all circumstances. An electrical supply cannot be necessary for a pressure safety valve to function so that it can be used in the event of a power loss. As a result, the process fluid is ultimately what allows all pressure safety valves to open and close. Depending on whether the Pressure safety valve is spring-loaded or pilot driven, the characteristics of the valve function vary.

Advantages of Pressure safety valve

It can be used mostly in all applications

Handle excess pressure

Protect the system, people,property and environment

 Industries that use Pressure Safety Valve:

Mining Industry

Wastewater Industry

Sewage Industry

Power plants

DESCRIPTION:

Body material: Cast iron, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), ductile iron, carbon steel, stainless steel (SS316, SS304, CF8, CF8M).

Class: 150-2500.

Nominal Pressure: PN10 to PN450.

Ends- Butt weld,socket weld,Flanged,Threaded

Size: ½” to 40”.

For more visit https://www.specialityvalve.com/product/full-lift-pressure-safety-valve/

Safety Relief Valve Manufacturer In Mumbai

SpecialityValve is the best Safety relief valve manufacturer in Mumbai. Safety relief valve is a valve that helps in the release of atmospheric pressure, or, to put it another way, it relieves pressure outside of a system. As a result, when the time comes, it will fully open and relieve the pressure, which will prevent an explosion. Wherever the maximum allowable working pressure of a system is likely to be exceeded, safety valves should be installed, especially when another piece of equipment in the system fails.

Why do we need Safety Relief Valve?

A Safety protects the system from over pressure. Over pressure builds when pressure increases the maximum allowable pressure. Safety relief valve opens very quickly is very helpful in preventing malfunctions, fire hazards or explosions.

Do Relief and Safety Valves Perform the Same Function?

Relief Valve are made to regulate pressure in a system, most frequently in fluid or compressed air systems. According to the rise in system pressure, these valves open. As a result, even when the system is somewhat overpressured, they don't fly completely open. Instead, they gradually open, allowing the system to recover to the predetermined pressure level. The valve closes once more when that point is reached.

Safety Valve - They are made to instantly release pressure in the event of an emergency or system failure rather than managing the pressure in a system. Safety valves, as contrast to relief valves, open fully and instantly to prevent a disaster rather than to regulate a system's pressure.

Industries that use safety relief valve

Refineries

Chemical industry

Petrochemical industry

Oil & Gas Industry

Description:

Available materials: Cast iron, Ductile iron, Stainless steel, SS304, SS316, WCB,WCC,WC6, LCB, LCC, SS316L, F55, F53, F51 Size: 1/2” to 60” Class: 150 to 2500 Nominal Pressure: PN10 to PN450

Ends: Butt weld,socket weld,Flanged,Threaded

For more visit: https://www.specialityvalve.com/product/steam-safety-valve/

#safety valve #specialityvalve

[valvesonly]

cast iron ball valve manufacturer in Mumbai

SpecialityValve is the best Known cast iron ball valve manufacturer in Mumbai. Cast iron ball valve is mostly made of iron, with a small amount of carbon and silicone thrown in for good measure. It's a material with a wide temperature range, low to medium pressure ratings, and the ability to manage significant vibration. It's also a good option for valves that are exposed to corrosive materials. A ball valve is a shut-off valve that uses a rotatable ball with a bore to control the flow of a liquid or gas. The medium can flow through or be restricted by turning the ball a quarter turn (90 degrees) around its axis. They have a long service life and ensure solid sealing throughout the life of the valve, even when it is not in use for a long time. As a result, they're becoming more used as a shut-off valve.

Advantages of Cast iron ball valve

Provides bubble-tight service.

Quick to open and close.

Smaller in size than a gate valve.

Lighter in weight

Offers Multi-port design

Different designs of ball valves offer flexibility of selection.

Industries uses cast iron ball valve

Oil and gas

Chemical

Refinery

Paper and pulp

Description

Available materials: Cast iron, WCB, WCC, WC6 Size: ½” to 48 Class: 150 to 2500 Nominal Pressure: PN10 to PN450 Operation: Lever Operated, gear operated, Electric Actuated and Pneumatic Actuated. End Connection: Flanged, Threaded, Buttweld, Socketweld Medium LNG, Cryogenic application, Water, Air, Steam

For more visit https://www.specialityvalve.com/product-category/3-piece-cast-iron-ball-valve/

BALL VALVE MANUFACTURER IN MUMBAI

SpecialityValves is well known reputed Ball Valve manufacturer in Mumbai. Ball valve is a valve for shut off  that control flow of liquid and gas by a rotary ball which have a bore. It rotate the ball around its axis by which the medium can flow or also can be blocked. Ball valve has a long service life with a good sealing even when the valve is not used for long period. Ball valve is popularly known as shut off valve. Ball valve are very resistant against dirt and other outside source.

Types of Ball Valve

Floating Ball Valve

Trunnion Ball Valve

Fully welded Ball Valve

Top entry Ball Valve

Jacketed Ball Valve

Advantages of Ball Valve

Have low purchase price and low maintenance cost

Ball Valve are less damageable than other types of valves

Ball Valves are easy to use and install

They are manufactured in different sizes and shape which provide flexibility

Provides leak proof service

Industries that use ball valve

Oil and natural gas

Manufacturing sectors

Chemical

Petrochemical

Ball design in Ball Valve

Floating: Mostly Ball valves have a floating Ball

Trunnion: Valves which have large diameters and high operating pressures have a trunnion design.

Description :

Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron

Available Size: 1/2 to 48

Class: 150 to 2500

Nominal Pressure: PN10 TO PN450

Medium: LNG, Cryogenic application, Water, Air, Steam, Oil

Ends: Flanged, Threaded, Buttweld, Socket weld

Operation: Lever operated, Electric Actuated and pneumatic Actuated, Gear

For more details visit https://www.specialityvalve.com/product-category/top-entry-ball-valve/

#cast iron #cast iron ball valve

[valvesonly]

Trunnion Ball valve manufacturer in Mumbai

SpecialityValve is a reputed leading Trunnion Ball Valve manufacturer in Mumbai. The flow of a medium in a system is started and stopped using a Trunnion Ball valve. A ball is attached to the stem on one side and the trunnion on the other side of this type of ball valve. Both the stem and the trunnion keep the ball in place. This design gives the valve more strength, allowing it to work more efficiently. The lever or actuator must be turned to a 90 degree angle to start and stop the flow. This valve can be used in both low and high pressure situations. When compared to other valves, this one has a relatively low operating cost.

Top valve manufacturing company

Since 2013, SpecialityValves has been one of India's top manufacturers and global exporters of industrial valves. With a solid reputation for producing high-quality industrial valves and being a reliable provider of all varieties of valves, including some of the most popular and frequently used valves, we are a trusted supplier of all types of valves. Our service is entirely centred on the standard of offering customised valve design and production in accordance with our customers' needs and desires.

We are a world's largest producer of high-quality goods, and our well-integrated work environment is the key to our success. Our infrastructure is dispersed across a vast area and has plenty of room for expansion. We put a lot of money into leveraging current production techniques to improve our ability to reach a wider audience with our products in a fast-paced market. Our in-house production facilities are divided into highly advanced divisions for R&D, product testing, packaging, and distribution, each led by a skilled professional.

Advantages of Trunnion Ball Valve

Both high and low pressure applications are controlled

This valve has a lower operating cost.

Efficient

Industries that use trunnion ball valves:

Oil and gas industries.

Petrochemical industry.

Chemical industry

Marine Industries.

Description:

Body Material: Cast steel (WCB, WCC, WC6, LCC, LCB), Titanium, Stainless steel (SS316, SS304, F51, F55, CF8, CF8M).

Class: 150-2500, PN25 – PN450.

Size: 2” to 48”.

Ends: Buttweld Trunnion Ball Valve,

Socket weld Trunnion Ball Valve,

Threaded Trunnion Ball Valve,

Flanged Trunnion Ball Valve.

Operations:

Handwheel Operated,

Gear Operated,

Electric Actuated.

Pneumatic operated

For more visit: https://www.specialityvalve.com/product-category/trunnion-ball-valve/

#trunnion ball valve