magwelding

[magwelding]

WHAT IS PLASMA ARC WELDING?

Process characteristics

Plasma welding is extremely almost like TIG because the arc is made between a pointed tungsten electrode and therefore the workpiece. However, by positioning the electrode within the body of the torch, the plasma arc is often separated from the shielding gas envelope. Plasma is then forced through a fine-bore copper nozzle which constricts the arc. Three operating modes are often produced by varying bore diameter and plasma gas flow rate:

Microplasma: 0.1 to 15A

The microplasma arc is often operated at very low welding currents. The columnar arc is stable even when arc length is varied up to 20mm.

Medium current: 15 to 200A

At higher currents, from 15 to 200A, the method characteristics of the plasma arc are almost like the TIG arc, but because the plasma is constricted, the arc is stiffer. Although the plasma gas flow is often increased to enhance weld pool penetration, there’s a risk of air and shielding gas entrainment through excessive turbulence within the gas shield.

Keyhole plasma: over 100A

By increasing welding current and plasma gas flow, a really powerful plasma beam is made which may achieve full penetration during a material, as in laser or beam welding. During welding, the opening progressively cuts through the metal with the molten weld pool flowing behind to make the weld bead under physical phenomenon forces. This process is often wont to weld thicker material (up to 10mm of stainless steel) during a single pass.

-Open the next page to read more ideas.

Share This

The post WHAT IS PLASMA ARC WELDING? appeared first on MAG Welding.

from MAG Welding https://ift.tt/33S9TGI #welding

#MAG Welding #welding

[magwelding]

What are the different types of welding methods?

In the following post, we’ll cover the fundamentals for every sort of welding method. This includes everything from oxy-acetylene brazing to stay welding to underwater welding.

Additionally, you’ll find differing types of welding methods, safety tips.

Different Types of Welding Method:

Arc Welding Basics

Sometimes the term “arc welding” is often confusing, which is why we’ve designed TFC’s Official Arc Welding Basics Cheat Sheet. First, we’ll start with an honest definition of arc welding. Then we’ll advance to arc welding uses the various sorts of arc welding, and tips and techniques. We’ll also cover tricky comparisons, like Arc vs Mig welding. Everything you’ve ever wondered about arc welding is here, in one easy spot!

Simply put, arc welding may be a sort of electric welding that permanently fuses base metals by forming an arc between the metals and therefore the electrodes.

An electrode may be a sort of wire that connects the welding machine to the metals you’re melting together. The electrode could also be consumable or non-consumable.

What’s the difference between consumable and non-consumable electrodes?

Commonly, consumable electrodes have quite one purpose: they contain a filler metal, which liquefies throughout the method. this is often common in Stick and MIG welding, and therefore the filler metal can cause quite mess when it melts! Typically, these are the well-liked methods.

On the opposite hand, TIG welding uses non-consumable electrodes. One major benefit is that this method is far cleaner and creates the foremost precise welds. However, it’s also the foremost difficult, and it takes the foremost time. generally, TIG is for welding extremely thin sheets of chrome steel, aluminum, and other non-ferrous materials.

In this process, filler metal goes to the weld through a tungsten rod, which may be a separate part from the electrode. Adding the filler metal separately makes the method very time-consuming.

Video Overview: all kinds of Welding

Metal Inert Gas/MIG Welding Basics

One of the foremost popular sorts of welding for beginners and experts is MIG welding. It’s also the simplest sort of welding, in most people’s opinions.

MIG welding stands for Metal noble gas welding, or Gas Metal Arc Welding (GMAW). Often, the term is employed interchangeably with aluminum welding. MIG is best for joining together thinner aluminum materials.

To summarize, MIG welding is that the method for joining aluminum, steel, and other non-ferrous metals. It requires steady electricity for warmth production, an electrode for joint filling and shielding gas to guard your weld from the air.

What gas does one use for MIG welding?

As a general rule, helium and argon gases work well for metals that don’t contain iron. for instance, while aluminum welding, you’ll probably want to use argon welding gas. However, that wouldn’t work well for steel.

Sometimes people use CO2, but this will be messy. Also, it doesn’t have a reputation for producing strong welds.

Can I do MIG welding without gas?

Well, there’s a reputation for MIG welding without gas: Flux-Cored welding. (Keep reading for more info about Flux Core Welding.)

That being said, you’ll use a MIG welding to do Flux-Cored welding. Simply confirm to use a flux core wire.

Check out this video for Lincoln Electric’s guide to picking the simplest MIG welding gas.

Advantages & Disadvantages of MIG Welding

Like all of the methods, Metal noble gas welding has its pros and cons. By and enormous, MIG welding features a lot of benefits. First of all, it’s the simplest sort of welding process, which makes it great for beginners. It’s also the fastest method.

On the opposite hand, MIG welding doesn’t work for materials thicker than 1/18″. Also, it doesn’t add overhead or vertical welding positions.

For more about MIG, inspect What is MIG Welding?

-Open the next page to read more ideas.

Share This

The post What are the different types of welding methods? appeared first on MAG Welding.

from MAG Welding https://ift.tt/2QejRfY #welding

#MAG Welding #welding

[magwelding]

What is MIG Welding?

MIG welding is an abbreviation for Metal Inert Gas. Also called (GMAW), it’s a process developed within the 1940s and is taken into account semi-automated. this suggests that the welder still requires skill, but that the MIG welding machine will continuously keep filling the joint being welded and electrodes don’t get to be changed out between welds.

MIG welders needed to weld using four main parts. First, there’s a power supply that gives the electricity to make heat. Second it the wire feed system that feeds the wire from a spool to the weld joint. The third may be a handle with a trigger that controls the wire feeder that feeds the wire from a spool to the weld joint. it’s very almost like an endless bicycle brake cable. The fourth may be a shielding gas to guard the weld from the air.

What is MIG Welding Used For?

MIG welding is most ordinarily utilized in fabrication shops where production is high, and therefore the possibility of wind blowing away your gas shielding is unlikely. Its main purpose is manufacturing and sheet work.

-Open the next page to read more ideas.

Share This

The post What is MIG Welding? appeared first on MAG Welding.

from MAG Welding https://ift.tt/2v47xHM #welding

#MAG Welding #welding

[magwelding]

What Is TIG Welding ( GTAW ) and How It Works

TIG welding called (Gas tungsten arc) may be a long-standing and highly durable welding process. It’s among quite 50 welding methods developed primarily to hitch magnesium to be used in aircraft manufacture during war II. TIG welding produces a weld that’s clean and freed from cracks, chips or slags. It’s a really slow, but highly-skilled, intricate welding process. It works well with most metals and may bend the metal for specialized designs. If you’re new in welding, you’ll have the question, what’s TIG Welding? Let’s take a glance at the small print.

What Is TIG Welding and How It Works

TIG welding may be a versatile process that works well with a variety of raw metals like magnesium, aluminum, copper, gold, brass, chrome steel, nickel, and bronze. The TIG welding process relies on continuous streams of gases from the arc and electrode to bind the metal. There’s an arc between the first metal and therefore the electrode. The metal melts because the arc connects to make a weld pool. The manual wire feed forces the wire filler into the pool for melting, while the shielding gases opened up to coat the new weld. As you feed the wire into the filer, you’ve got to stay working the pedal to propel the warmth through the arc. the method is clean, precise and seamless, with no smoke, fumes or sparks.

-Open the next page to read more ideas.

Share This

The post What Is TIG Welding ( GTAW ) and How It Works appeared first on MAG Welding.

from MAG Welding https://ift.tt/2TpupdW #welding

#MAG Welding #welding

[magwelding]

47 Cool Welding Project Ideas for Home, Hobbies, or To Sell: Easy DIY Plans

Welding is often tons of fun. It also can assist you to improve the worth of your home by allowing you to form essential repairs without the necessity to rent a specialized repair professional. It can become a soothing hobby.

It also can be an excellent side hustle if you’re looking to supplement your income.

Here are a number of the simplest welding project ideas that will assist you accomplish your goals, perhaps as soon as today.

WELDING PROJECTS FOR BEGINNERS

1. DIY Welding Table. this easy table uses a couple of straight metal pieces that are welded together into a frame. Metal slats on top provide spaces for clamping, providing a sturdy space for heavy projects that’s still light enough to maneuver.

For more, see the project by clicking here.

2. Shed Antler Trap. this is often another basic frame project that permits for antler harvesting without hunting. When the season is true, the deer will feed out of this project. Their antlers then grind to a halt and achieve. If not, the deer leaves with a full belly.

For more, see the project by clicking here.

-Open the next page to read more ideas.

Share This

The post 47 Cool Welding Project Ideas for Home, Hobbies, or To Sell: Easy DIY Plans appeared first on MAG Welding.

from MAG Welding https://ift.tt/2TnFEns #welding

#MAG Welding #welding

[magwelding]

What Are The Different Types of Welding Gauges?

Welding gauges help to live angles, length, depth, height of the welded joints. These gauges are available in differing types.

//image//

Welding gauges are generally wont to identify and measure all kinds of angle, length, depth, height accurately. These gauges always offer the foremost precise measurement. they’re classified into differing types like digital seam gauge, manual seam gauge, automatic size gauge, bridge gauge, Skew-T weld gauge, bevel gauge, etc. Let’s take a better check out the various sorts of welding gauges in short.

Digital seam gauge

A digital seam gauge is usually used for measuring different weld angles and edges accurately. This battery-operated gauge is widely utilized in every welding industry. it’s an LCD display that shows the precise results whenever. This gauge is often easily reset and also you’ll easily connect it with the printer for the output data by employing a data cable.

Manual seam gauge

This is another common welding seam gauge by which you’ll measure angles manually. it’s generally made from chrome steel. The working rule of this gauge is analogous to the digital gauge. Only it offers a manual measuring option. The manual welding gauge is cheaper as compared to a digital seam gauge.

Automatic size gauge

This is another sort of welding gauge that’s widely employed by a welding inspector. it’s also made from chrome steel and provides precise measurements whenever. the most applications of this welding gauge are:

● Check Reinforcement

● Fillet weld’s throat inspection

● Fillet weld’s leg size determination

Bridge gauge

This gauge is usually made from chrome steel. it’s commonly used for measuring important dimensions very accurately. Angle preparation, fillet leg length, butt-weld reinforcement, misalignment (high and low), hole sizes and throat length are often measured by this gauge. The linear measurement (50mm to 2 inches) also can be measured by this gauge. Bridge cam gauge is extremely durable and also referred to as a multipurpose gauge.

Skew-T weld gauge

This gauge is ideal for measuring throat dimensions, leg length, and skew angles. it’s the foremost important tool for welding inspectors and designers. The applications of the skew-T weld gauge are given below.

● angle measurement

● Acute side measurement

● Obtuse side measurement.

Bevel gauge

A bevel gauge generally consists of slide gauge, bevel scale, and therefore the main scale. it’s wont to measure the bevel angle, height, and width of a weld gap and seam. it’s designed with chrome steel and really compact in size. This portable gauge always gives the foremost precise measurement. Most of the welding specialists use these gauges for various applications. The measuring operation is often easier and smoother with the assistance of those tools.

The post What Are The Different Types of Welding Gauges? appeared first on MAG Welding.

from MAG Welding https://ift.tt/3akf6ZE #welding

#MAG Welding #welding

[magwelding]

Mag welding description and safety ways to keep in attention.

#welding #welder #mag_welding