stackableringsny

[stackableringsny]

Know More About the Most Exquisitely Shaped Pear Loose Diamonds

A pendant with a pear-shaped diamond looks most elegant, more so when it is adorned along with a pair of earrings featuring the same cut of diamonds. The slender and strikingly beautiful appearance makes it quite attractive. Pear loose diamonds are also encrusted on rings. Such a ring appears to have a lengthening effect and makes for quite a piece of statement jewelry.

 More on Pear Loose Diamonds

 This shape of diamonds is also known as Penderloque or the teardrop cut. Any jewelry that has pear loose diamonds will stand out as it gives out the impression of being a blend of marquise cut of diamonds and round cut diamonds.  The pointed edge of the diamond can make any color appear darker.

 Even though it is one of the best cuts, it can have a bow-tie effect. In other words, a kind of shadow may seem to appear at the center when the stone is held at a particular angle against the light, something which is not desirable in such an exquisite piece of diamond.

 Tracing the Roots of the Pear Cut Diamonds

 It is believed that the cut first came into existence in 1475, thanks to Lodewyk van Bercken who made the diamond polishing wheel. With the help of this wheel, he could polish the different aspects of the diamond and used it to bring in symmetry in the way the facets were placed. This led to the introduction of the Pendeloque cut. It was seen that this particular cut led to very little shine and therefore pear loose diamonds were not viable commercially.

 The Technical Aspects of Pear Cut Diamonds

 Thenumber of main facets range from four to eight. They appear at the lower end of the diamond and therefore cannot be seen. However, these are said to be the most crucial. Moreover, these are the ones that enable light to pass through the diamond and reflect the same.

 Coming to the facets now, the total number of facets a pear loose diamond has is between fifty-six and fifty-eight.

 For this particular cut of diamond, a ratio in the range of 1.5 to 1.7 is regarded as desirable. A higher ratio indicates how slender the diamond is.

 It is also important to consider the color of the diamond. These diamonds tend to hold color. It is important to choose a good color when it comes to pear-cut diamonds.

 The most important aspect is surely the cut and this reflects in its value. Symmetry holds the key when it comes to these precious stones. To know if the symmetry is correct, one can draw an imaginary line across the stone. If the parts of the two sides are identical to each other, then you can rest assured that the cut is perfect.

 Pear-cut diamonds are in vogue. Owing to their shape, they give the impression of being slightly bigger than the round-shaped diamonds. So, what are you waiting for? Go and choose some pear loose diamonds for your jewelry.

#Pear Loose Diamonds

[stackableringsny]

Engagement Rings with Pear Shaped Loose Diamonds

The many shapes of pear-cut diamond have charmed aficionados to create exquisite ornaments. The pear shaped loose diamonds is a modified brilliant-cut, meaning it flaunts the splendor of a round-brilliant cut; without the predictability of its roundness. It is a fascinating blend of oval and marquise cuts. The pear cut or teardrop diamond has witnessed the soaring popularity among several celebrities, considering it over the traditional round brilliant solitaire.

With its unique elongated outline, the pear-shaped loose diamond can be well-set in inventive silhouettes. Hence, the jewelers use pear-shaped diamonds to craft several one-of-a-kind diamond engagement rings. You can play with the carat weight, color, and dimensions to arrive at a perfect pear-shaped diamond that best meets your design requirement.

Pear-cut diamond engagement ring

There's no denying that the round brilliant has ceded ground to the pear-cut diamond. Pear-shaped diamond engagement rings are making a significant comeback. Pear-cut is a stunner and is not only eye-catching but also creates the sought-after illusion of elongating and flattering your finger. And irrespective of its size, a pear-cut diamond usually sparkles a little more than other fancy counterparts.

Pear-shaped diamonds offer several possibilities to include diverse aspects and aesthetics. Think of a minimal solitaire, an elaborate vintage-inspired style, a fancy colored pear-shaped diamond, and uncommon designs with colorful gemstones. You can also opt for unconventional settings of double-band rings, clusters, off-kilter stones, or multiple stones. These are ideal if you're inclined to avoid the trap of the traditional diamond engagement rings. The versatile teardrop pear diamond beautifully comes through and shines in every possible setting and design.

Pros and cons of pear-shaped loose diamonds

The best part about pear-shaped diamonds is their elongated shape. Thanks to this advantage, they appear much bigger than their other counterparts of comparable sizes. Hence, offer better value than a round brilliant, with a visibly larger surface area.

A pear cut diamonds customizable, as it can be set north-south, with the stone facing up or down, east-west horizontally, or interestingly off-kilter.

Though appearing larger carat for carat, the particular pear shape makes it susceptible to damage. The pointy, minute tip is quite fragile, and unless properly cared for, is highly vulnerable to chipping and breaking. The pear shape is not symmetrical, and unless cut to perfection, may appear heavier on either the rounded or pointed side to create a lopsided look.

What makes your pear-shaped diamond engagement ring perfect?

Avoid the bow-tie effect in your piece of pear diamond. This dark zone at the center of the diamond will be minimal in a well-cut stone. Optimal proportions and symmetry will ensure a not too narrow or wide pear-cut diamond.

Both bezel setting and prong setting work ideally for pear-shaped diamonds. A V-prong at the pointed edge can help guard the diamond against unwarranted damage. All metals work beautifully with pear-cut diamonds. Having a bigger surface means pear diamonds exhibit more color than other diamonds. Rose gold or yellow gold complements a slightly colored stone.  

[stackableringsny]

Your Complete Guide to Diamond Anniversary Bands

Celebrating your togetherness is best done with a stunning diamond anniversary bands. The variety and versatility of design make anniversary bands an excellent choice to surprise your loved ones. Diamond says it best when you want to celebrate the special moments and milestones of your relations. Diamond anniversary bands, in particular, make a wonderful present.

 Anniversary rings are elevated and embellished wedding bands as they combine the best of both worlds – brilliance, and functionality. Diamond anniversary bands can flawlessly accommodate colored gemstones without compromising on the final flourish.

 How diamond anniversary band is different from a wedding ring

 Though sounding similar, anniversary bands are different from wedding bands. For starters, traditional wedding bands look far less subtle and minimalist when compared to anniversary bands. Wedding bands are, in fact, the understated accompaniment of engagement rings. They are here to complement and not overpower the special engagement ring. Alternatively, diamond anniversary bands are celebratory rings that can afford to look far more glamorous than an expected plain wedding band.

 Buyers who already have a bridal set of engagement rings and wedding bands, often pick a diamond anniversary band that completes and complements the set. However, there's no hard and fast rule. You may mix it up with different shapes and even shades of diamonds with two fascinating rings. Sometimes, more than just appearance, the meaning often takes the center stage. The key is what the ring symbolizes to a couple. Many often choose a diamond anniversary band distinct from the other two.

 How to choose your diamond anniversary band

 Your diamond anniversary band ideally should reflect who you are. Slightly thinner or wider, one or more rows of diamonds, sparkling inclusion of sapphires or rubies – irrespective of the design, your anniversary band should be reflective of your personality or rather your individuality. Feel free to indulge in complimentary style instead of solely focusing on buying matching couple anniversary bands. Play with stones, colors, sizes, shapes, and metals to arrive at bands that are uniquely you.

 Try to avoid the 'trendy' trap

 Diamond bands are stylish and often something you'd love to wear on their own sans your wedding or engagement ring. Though it is tempting to fall for an off-the-moment style, try to avoid this mistake. Erring on the side of caution is a better idea as your anniversary band will outshine and outgrow the changing trends. You may feel like wearing it every day, and only a classic and truly elegant will sustain the test of time. 'It' girls on Instagram should not be the ultimate deciding factor when you invest in a diamond anniversary band.

 Fit and comfort factor of your diamond anniversary band

 Few say it, and even fewer follow it. A stylish diamond band may end up being the wrong choice if the band doesn't fit well or sit comfortably. The sleek diamond anniversary band doesn't look good on your finger. Gauging your size is not a great idea as it only underscores the importance of perfect sizing.

[stackableringsny]

A Quick Guide to the Round Brilliant Cut Diamond

Round brilliant cut diamond is a popular member of the diamond family. If you have heard this ad infinitum, here is a little bit of information to back up this claim. Believe it when a salesperson tells you this because about a three-quarter of diamonds sold in the jewelry industry is round-brilliant cut. That’s how popular this cut is. The key reason for the undying popularity of this cut is not its classic shape or its expensive looks, but the fire and brilliance, which to this day is unmatched. 

The Ideal Round Cut Diamond

The Ideal round cut diamond is the highest you can go in round cut. The ideal being the most premium in any cut and the round brilliant ideal is the most iconic cut known to us. It delivers maximum brilliance, scintillation, and fire, all of which give a diamond its timeless beauty and attractiveness. 

But the round cut diamond we see today is not the same as the ones our previous generations knew. Round cut since the Old European time from which it has evolved has changed leaps and bounds over the years. Today’s round brilliant diamonds are optimal in their sparkle and dazzle. Thanks to professional cutters and their knowledge derived through generations of research. The ideal round brilliant cut diamond of today exhibits a fine cut that is unparalleled but also practical. The geometry of the round cut is a marriage of delicateness and elegance. It is marked with the readiness to be used rough. 

What Carat Size to Get?

When you research the round brilliant cut diamond, you will learn that this cut has a zero-size advantage. The reason that it is the priciest cut on the chart is that cutting a diamond to a round brilliant shape involves a lot of wastage. Besides, the geometry leaves no room for visual carat enhancement. Because a round brilliant cut diamond looks just the size it is, buyers often get tempted to buy a bigger stone for a steeper price. It doesn’t have to be that way. You can choose to cluster-fit your jewelry or micro-pave it. That would require you to buy tiny diamonds that cost nothing and sparkle plenty. 

What clarity Grade Works Best for the Round Brilliant Cut?

  The round brilliant cut diamond is naturally sparkling and clean looking, no matter what end of the gallery you choose it. So, you can rest assured that no matter how low your budget is, the only difference you will see is the price. Diamond of lower clarity grade cost a lot less than those in the upper end of the market. And when you have a cut like the round brilliant, the pressure of getting clear stone is low. The choices you will have are Flawless, Internally Flawless, VVSI, VSI, SI, and Imperfect. You can confidently pick from the VSI and SI grades without giving away anything. 

#Round brilliant cut diamond i

[stackableringsny]

3 Reasons To Invest In A Round Brilliant Cut Diamond

The round diamond is a traditional shape that has remained in vogue for centuries. From royalties to successful professionals and happy brides, there is no individual left to appreciate the aura of the round diamond. Indeed the round shape looks appropriate when placed on any finger, whether slender or thick. Moreover, when its brilliance overshadows other diamonds, this round brilliant cut diamond has multitudes rooting in favor.  

Never hesitate to choose between a round diamond with the highest brilliance and any other offbeat shape. Place your money on the former for its popularity will outlast the others. Why put added emphasis on the word brilliant when asking for a round diamond? Well, you will be interested to learn that this particular cut allows the maximum amount of light in and reflects it in all possible directions. The result is pretty dazzling.

Check the technicality behind achieving such an effect, and you will come to learn that this round diamond consists of 58 facets that form a conical shape on the gemstone surface. The highest quality of brilliance gets achieved when all the facets reflect light through the table. Fire and brilliance go hand in hand here. You will covet the instant you set your eyes on it. 

Well, should you spend so much money on a round brilliant cut diamond when you can buy bigger diamonds for an equal amount of money? Think about the many reasons that make the round diamond one of the most desirable ones in the world. You will be excited to know that the round brilliant cut diamond is:-

Hugely Popular- This cut has been popular for a considerable period possible. It is rare to find the round cut with awesome brilliance missing from an array of engagement rings. However, the supply remains undiminished, and you will be able to source one that looks and feels right. The pricing may be competitive as each jeweler is vying with the other. Do take note of the four Cs before assenting to one that captures your attention. 

Very Versatile- You think of a design, and the round-shaped diamond with extraordinary brilliance will fit the bill. You may set it as a solitaire ring or wear it surrounded by a cluster of micro pave stones. Pair it with other colored diamonds to design a three-stone ring. The round diamond is sure to stand out from the rest given its sheer brilliance. You will not have any misgivings while adding this beautiful diamond to a pair of earrings or shaping it in the form of a pendant. It will match perfectly with every setting making you look pretty. 

Flawless- No! The round brilliant cut diamond cannot be bereft of any flaws. However, its flaws can be hidden pretty well with crown facets and the mounting consisting of metallic prongs placed suitably. No one will be able to discover the defects unless they are bang in the center of the stone or are too numerous to be hidden. 

Go ahead and invest in a round brilliant cut diamond. It will provide you with good value for money. 

#round brilliant cut diamond

[stackableringsny]

Should You Sport A Micro Pave Wedding Band?

It is an engagement ring that grabs all the attention, with the wedding ring or band becoming a poor second. However, you cannot underrate the wedding band that is huge in significance. However, you have to be extremely careful while investing in it, for not only will it be the everlasting symbol of your love, but you would want it to be safe enough for everyday wear. 

Admittedly there are millions of rings and bands displayed by noted jewelers today. You may go an extra step and order a tailor-made wedding band as per your choice. It is a good idea to check the features you would find in a wedding band. You may not want a huge diamond at the center, for it would be complicated to balance with the engagement ring already on your finger. 

Ask your bestie or look at the most favored wedding bands of celebs. You would be excited to learn that the micro pave wedding band is in vogue. While the glittering micro pave diamonds to give a sparkling look to your petite finger, you are welcome to use them to emphasize the center stone or do without a central diamond completely. 

Micro Pave Setting: what is it?

It makes sense to check the facts before shopping for the right wedding band. You will be interested to know that micro pave diamonds do not refer to specific diamonds but are about the setting. It sports multiple tiny diamonds set close together on a metallic band or the shank of a ring. 

While a pave setting has the diamonds positioned into small holes drilled into the metal, the micro paves setting differs in size, where both the size of the diamond as well as the prong are kind of miniature versions of the traditional pave setting. 

You would thus have to go for many diamonds to make the band stand apart. Choose diamonds as small as 0.01 carats in weight or go for something even lighter in weight. 

Reasons to buy a micro pave wedding band

There is no other way to say this, but such bands are stunning. The tiny diamonds may not pack much of a punch singly, but together they make the effect unbeatable. 

You get more value for money as the sparkle outdoes any other diamond. 

You may encircle your finger with the wedding band so that it appears to be a circle of light on your finger. You may also draw attention to a center diamond, especially when you are eager to flaunt a whopping big gemstone. 

You may pair it with your engagement ring or wear it singly, thus depending on your taste.

There are multiple advantages associated with this setting. While you pay much lesser a price for micro pave diamonds, you get more than you hope for. Moreover, you are sure to come across multiple designs for the micro pave wedding band that provides you with an opportunity to opt for a vintage look or a modern style according to your wish. 

[stackableringsny]

Selecting the Right Men’s Wedding Bands

When it comes to men’s wedding bands, why should women have all the fun? No one said that girls can get the best wedding bands in terms of style or value. Men too should not settle for anything plain. Here you will find some important points about wedding bands for men so you can make a practical and trendy choice for your groom.

Are bands for men traditional?

Not everything is traditional, as in the case of men’s wedding band, which only started featuring in the 1920s. Later, married soldiers who went to fight in World War II started wearing wedding bands, so that they could always remember their dear wives. Later, members of the British royal family popularized metals like platinum for wedding bands, and taking cue common men too started sporting metals other than gold or silver.

Choosing the right wedding band

You should first be aware of the activities a groom enjoys before selecting the wedding band. If the guy is laid back and does not indulge in sports or outdoor activities, you can choose a diamond ring with some fine detailing. However, if he is the sporty sort, then it would be safer to opt for a lightweight yet sturdy metallic band. Additional embellishment would be more prone to damage given his active lifestyle.

Who should make the move?

Here we don’t follow any rules. The groom can buy it himself, but it would be more fun if the couple went shopping together. It could also be a loving gift from the bride. Everything depends on their choices. Just make sure the size and fit of the ring are perfect, and the diamond is of the best quality.

Diamond Wedding Bands for Men

Their durability and style make diamonds the perfect choice for men. Before settling for one make sure you are well-versed with GIA certification, and the 4Cs of diamond namely cut, color, clarity and carat weight.

Diamond Cuts for Men

The cut of a diamond determines the beauty and brilliance of the diamond. So you need to choose the cut keeping this in mind and also the preference of the groom. The best-suited cuts are the emerald cut, Asscher, cushion, radiant, and round cuts.

Adding Some Gemstones for Extra Spark

If the groom has a colorful and lively nature you can also choose designs with a combination of diamonds and precious stones such as ruby, sapphire, garnet, spinel, tourmaline, topaz or any even his birthstone.

Precious Metals to Choose from

The newer trends are white gold, platinum, and rose gold. In the last few years, our modern men have got hooked to the trendy designs set in the cool white metals. Although many consider rose gold to be feminine, the deeper tones look quite smart on men. Now yellow gold is a metal that has been used for ages and men who love antiquity, history and love everything about past grandeur will love all forms of gold. To make a striking statement one can even combine two metals like white gold with yellow gold or platinum with rose. Having learned of all this, now you just need to choose the right jeweler and the rest will fall into place.

#men’s wedding bands

[stackableringsny]

Dos and Don’ts Of Buying A Micro Pave Wedding Band

If you want the onlookers to be dazzled and enticed by your wedding band, ensure it by settling for a micro pave wedding band. Remember that micro pave is typically a very small-sized diamond, far less than 0.10-carat size. You will not be able to wow the crowd by using a single diamond. Instead, the micro pave band refers to the setting; and not the diamonds themselves. 

You can use the setting to accentuate a larger center stone created out of a stunning gemstone. However, there is usually no center stone in a wedding band. Feel free to add as many micro pave diamonds to the setting as possible to create an illusion of pure light encircling your finger. 

Be fastidious about using at least 50 micro pave diamonds, but you can safely go up to 100 or more if money is not that important. 

The outcome should be a set of sparkling stones with no part of the metal band revealed. Sure, such a wedding band may prove to be far more expensive than other styles, but the result is justified and adds to the pleasure of the wearer and viewers alike. 

The secret of Micro Pave setting

It is not a closely guarded secret but one obvious to the gemologists and jewelers! Yet, you would be surprised to know the hard labor spent crafting a small wedding band that holds micro pave diamonds. 

The highly skilled craftsmen are methodical about placing each tiny diamond into the carefully drilled hole on the metal band. Not a single stone remains out of place when skilled workers create the wedding band. You may opt for a wedding band with a single line or double lines of micro pave diamonds to shape the entire wedding band. However, many users prefer to go for the half wedding band where the top half of the wedding band contains tiny diamonds. 

Reasons to select a micro pave setting wedding band

Apart from creating an illusion of light encircling your finger, you may want to order a Micro pave wedding band when you are eager to: -

Flaunt a dainty and delicate wedding band with no metal being visible

More skin is exposed apart from the diamonds that are certain to photograph well. 

You can always reuse the diamonds in other jewelry years later

You can also use the micro pave band with a brilliant center stone or compliment a halo setting and a three-stone ring. 

You can wear your engagement ring by stacking it with the wedding band. 

 This type of setting is popular, and that means you would not have to wait endlessly to find the right one. You will be able to choose between vintage and contemporary styles when you are eager to show off multiple tiny diamonds on your wedding band. 

Where should you buy a micro pave wedding band?

It is imperative to check the credentials of the jeweler before you invest in an exquisite micro pave wedding band. Be clear about the specifications and insist on a warranty and/or GIA / AGS certificate. 

#micro pave wedding band.

[stackableringsny]

Reasons to Choose a Radiant Cut Diamond for an Engagement Ring

If you are scouring online galleries clueless of what to pick for the engagement ring you are planning to design for your darling, and every design you see only seems to thicken the confusion, you need to stop. An easy formula to simplify things is to answer the question of what kind of cut you are looking for. Whatever your answer is to that question, a radiant cut diamond is a great pick for you. For anybody looking for a stunning cut diamond for less, the radiant cut is one of the top choices.

So here is why you want to end your struggle with choices and go with a radiant cut hands down for the engagement ring.

For a fancy cut diamond, the radiant cut diamond has excellent brilliance. Some say it even equals the round cut. That or not, it sure surpasses all other rectangular cuts on the chart and comes as close to the round cut as any fancy cut of its kind.

The greatest USP of the radiant cut is not its remarkable brilliance but its unique shape. The radiant cut is neither square, nor round. It’s a shape in between that is best described as radiant. The cushion cut may come close but the radiant cut is still pretty unique and can hold its own where rare shaped cuts are concerned. The knocked off corners and the clean and sharp edges give the cut an octagonal look which is a novelty in the fancy diamond cut category. Hopefully someday there will be more octagonal cuts in the market but until that day, the radiant cut is the most unique.

One of the things that make the radiant cut diamond a top pick in the fancy category is price. The radiant is a very efficient cut that entails low to no wastage. That said, cutting a radiant cut diamond from a diamond rough causes minimum wastage and that makes radiant cut diamonds economical.

The radiant cut is undoubtedly a contemporary cut but it’s not like any other of its kind. This one is a modern cut with a twist, in that it is very versatile and goes perfectly with any design and setting. So, you can very easily put a radiant cut diamond in a modern looking design as well as a vintage inspired one. It will enhance the aesthetics of both beyond measure.

One of the greatest advantages of choosing a radiant cut diamond is that it has the right kind of depth and brilliance that can hide blemishes and flaws. Hence, with radiant cut diamonds, you don’t need to pick from the higher end of the scale. A stone of a slightly lower quality will do just fine. This way, you can save a good deal of money on the price without compromising on the visible quality of the stone.

Above are only some of the top reasons why you want to choose a radiant cut diamond among all other cuts for your engagement ring. There are more ways in which a radiant cut will keep you in arrears. So, go ahead and get the best radiant cut diamond you can afford.

[stackableringsny]

What You Need To Know About Classic Gold Wedding Bands?

There is nothing more classic than gold wedding bands when you are eager to take on the role of a traditional bride. Gold has been the cherished metal for centuries, and brides did not have to look further than a beautiful gold band to adorn their ring finger or complete their wedding set. Sure, the classic band is quite simple, but you will find it in various shapes and sizes at present. You can always recall seeing the lucky couple exchange vows and wedding bands/rings simultaneously in front of the Holy Priest. Even individuals who do not follow the Christian faith have chosen to slip a conventional gold wedding band into their ring finger. 

The beautiful gold wedding bands were mass-produced during the Victorian era, and every household hoped to save enough money to buy a simple wedding band crafted out of gold, deemed to be the purest of all metals. While wedding bands and engagement rings became a symbol of marriage, the lower half of the society found solace in 9 to 10 K gold. The metal was far from pure and would tarnish with time, but it glimmered on the wedding day, making the couple and their families exceedingly happy. 

Why do you want a gold band?

The plain gold band is similar to that little black dress. It can pair with anything and everything. It makes sense to slip on the gold wedding band when traveling. You may also choose to wear it with an unconventional engagement ring containing one of the softer gemstones. Furthermore, you will find it included in almost all wedding sets with the gold band regarded as a staple. 

You have to be careful about the quality of gold when you want to wear a vintage ring. Wearing it daily; is likely to wear out the gold, and you must insist on having a wider band made out of gold. Thin bands may look graceful, but there is always the fear of the metal breaking down when you observe pitting within the band. 

How to choose gold wedding bands?

Purity- The European market favors 18K gold for jewelry, including plain band, whereas the Americans are satisfied with 14K. The former is richer in hue and contains more gold. The Asian countries that value their gold jewelry remain focused on 22K, or 24K gold. However, the purer the gold is, the more brittle it becomes. Jewelers are unable to create intricate shapes when the gold is of unusually high quality. It may be a good idea to go for 14K, or 18K when you intend to wear it all the time. 

Durability- When wearing a band, it is significant to choose a solid one. It increases the durability of the jewelry and is sure to last a lifetime if you are careful about maintaining it properly. Check the band meticulously and avoid buying a hollow band. It is definite to be a little inexpensive in comparison. 

 Gold wedding bands are versatile, and you are sure of getting a good one within your budget. 

#gold wedding bands

[stackableringsny]

Customize Heart Shaped Loose Diamonds for that Breathtaking Look

Your wedding will be the most memorable occasionof your life. A wedding is a beginning of a new journey in life. They say home is where your heart is and if it’s made of diamond, then make sure its brilliance is unparalleled. Hence, customizing a wedding ring or any other jewelry for the lady in your life says it all, a promise, a vow, and the expression of love that would last forever. But this promise takes all the efforts.

Indeed, your choice of a heartshaped diamond will speak volumes. Heart shaped loose diamonds are rare to be found. It’s cut to perfection you would say, but the effort to do that is limitless and a matter of a great time, effort, and calculation. Shaping a perfect heart-shaped loose diamond from a naturally-found diamond needs a lot of proficiency and expertise.

Things to consider

While cutting the diamond in a heart shape, two things need to be taken into account. Primarily, the alignment of the cleft of the heart diamond. It must be symmetrically aligned with the pointed tail, thus ideally producing 2 halves when cut from the middle. Next, the cleft should have a sharp delft, unlike the edges that should have a smooth carving, thus creating the form of an immaculate heart-shaped loose diamond.

Large heart shaped loose diamonds make all the difference

If you are deciding on a heart-shaped loose diamond for your wedding day, you would want it to have a magnificent brilliance which is possible only with a bigger diamond. Smaller cut diamonds are not preferred because they have less fire than a larger diamond. Pick something around 0.50 carats if not beyond. The shape varies from being fat to narrow.For a classic heart-shaped loose diamond, the length to width ratio should be around 1.00.

However, if the diamond is to be set in heart pendants or other fine jewelry, it is best to opt for a narrow cut diamond with a ratio range of 1.05-1.15. However, if it has to be set along with a solitaire ring, a slightly wide-cut diamond having a ratio of 0.85 to 1 is preferable.

Cool colorsof heartshaped loose diamonds to die for

The color range starts from D,E,F till Z. D in the color range is considered to be colorless, and hence it is considered the best quality of a diamond. Such varieties usually comewith a high price tag. Descending towards Z would lower the price on the way. These variants display a slightly yellowish or brownish tint. When it comes to clarity, diamonds are measured as FL, IF, VVS1, VVS2, VS1, VS2, SI1, SI2, I1, I2, and I3.

FL category indicatesthe flawlessvariety of the diamonds in question. It is believed that FL diamondsare free of any inclusions or blemishes. These are considered the best quality diamonds. As we approach L3, the diamonds have visible blemishes and flaws that deplete the quality of the diamond.

Similarly, look for the best cut and shape of the diamond if you plan to buy one. It varies from Excellent, Very Good, Good, Fair, and Poor. This inadvertently influences the brilliance of the diamond.

It is always better to go for the best variant of diamonds because it is an eternal affection of love and commitment. Certainly, it has to be spot-free.

#Heart Shaped Loose Diamonds

[stackableringsny]

Why Are Round Brilliant Cut Diamond Engagement Rings Still Top of the Chart?

The round brilliant cut diamond is a refinement of the vintage old European round. It is a cut so popular that it has seldom been challenged by any other cut ever since it arrived in the market. The round cut has come a long way since its early days when it had a smaller table and fewer facets. Today, the differences between the geometries of the old and new round cuts are very many. Hence, it's safe to say that the round brilliant cut diamond as we know it today is quite different from what Marcel Tolkowsky pioneered back in 1919. 

The Popularity of Brilliant Cut Diamonds 

Since early on, round brilliant cut diamonds have remained extremely popular. Both its cut and style have been a favorite of women for decades. The round diamond, to this day, remains to be the most popular pick of stone for most kinds of jewelry. So, it is not just a round brilliant cut diamond engagement ring that enjoys the appearance of this stone. The stone is seen in other kinds of jewelry too. However, it is the crowning jewel of one key section, and that is engagement rings. 

The round-brilliant cut evolved from the Old European Cut. It existed some 600 years now, and in those many years, it has ruled in the engagement ring genre. It has stayed on top since the day it landed in the ring section and is to this day, has been an absolute favorite of the ladies. Many new cuts have followed it to the market, and many old ones have returned. However, the popularity of the round brilliant cut diamond engagement ring has not been dimmed by any of that.

Reasons for the Undying Popularity of Round Brilliant Cut Diamond Engagement Rings 

The unsurmountable popularity of the round brilliant cut diamond engagement ring owes to a few things. These factors explain and justify how these rings have remained at the top of every list forever.

The shape of the diamond is unique and unmissable. It has remained new in the engagement aisle even after so many years. The round brilliant cut accounts for 75% of the diamonds sold in the market. Most of that goes to the engagement ring industry, where a majority of the buyers favor classic and traditional pieces, all of which the round brilliant cut is.

While the appeal of this ring is timeless, there are other reasons for its unrivaled popularity. The value of a round-cut diamond is always higher than the other cuts. That makes a round brilliant cut diamond engagement ring generally more expensive and precious than the other rings. So, while the ebb and flow of fashion change with time, this distinct style of the ring continues to stay float enticing shoppers of all tastes and preferences.

Quality is another crucial factor working behind the popularity of the round brilliant cut diamond engagement ring. Round brilliant-cut diamonds are made from some of the finest stones in the market. So, they naturally have high grades. It naturally ups the value of the rings that feature them. 

#Round Brilliant Cut Diamond Engagement Rings

[stackableringsny]

Eternity Wedding Bands Are The New Bridal Ring

For those who have a passion for clean structures and streamlined splendor, the eternity wedding band is for them. This is true for people who love to think inside the box yet look for something a little more different. Think princess cut tiny diamonds juxtaposed with dainty chains, repeating patterns, or sleek curves. Eternity bands are all the rage for all the right reasons. They offer charisma of multiple diamonds, an unreal combination of glamour and simplicity – everything you look for in a wedding band. The diamond eternity band is nothing short of visual poetry. Fabulous and classy, your wedding ring becomes a statement when it's a diamond eternity band.

 Different types of eternity wedding bands

 Eternity wedding bands are all about a diversity of designs and styles. The eye-catching composition of diamonds and metal creates a stunning cohesive ring. The demi pattern eternity wedding band has a half-circle of diamonds. The full eternity flaunts a complete circle of sparkling diamonds. A diamond eternity also looks gorgeous alone or in a stack with an engagement ring.

 The shapes and cuts of diamonds also vary according to your preference. The setting can be toyed with to arrive at a ring that's elegant yet extraordinary at the same time. Both platinum and gold are perfect for wedding bands. Titanium and silver are also the new favorites. Think twin rows of tiny diamonds encircling the ring from top and bottom.

 Optimal comfort and uncluttered appearance are the double positives for eternity bands. Unlike the conventionally plain wedding band or the massive bauble of an engagement ring, eternity bands blend the best of both worlds. A multitude of diamonds in a glorious loop guarantees extra sparkle while saving thousands as you avoid one multi-carat solitaire.  

 Settings of eternity wedding bands

 There are four setting styles for diamond eternity wedding bands – channel, prong, flush, and bezel. If you're planning to pair the wedding band with the engagement ring, try to complement the metal and style as closely as possible to create a captivating combination. Many diamond eternity bands use prongs as their setting. The prong setting is perfect for letting more light reach the farthest corner of every diamond. It also offers numerous angles for the light to illumine each diamond in most flatteringly, resulting in improved brilliance. The channel setting is best to safeguard your diamonds from daily wear and tear.  

 Why your eternity wedding band is the perfect engagement ring?

 Thinking beyond the classics is an excellent way to start your journey on the path of unconventional. A tastefully done diamond eternity wedding band is a beautiful alternative to an expected engagement ring. An eternity band in an unusual setting is an innovative and welcome choice for an individualist bride.

 The sparkle of a diamond solitaire can be stunningly reflected in a series of pear-cut diamonds in a demi-eternity band. An unusual setting of diamonds or a geometric, never-before-seen cut – there is no dearth of creativity and imagination to produce a radiant diamond eternity wedding band. Foregoing your bigger stone is easy with this.

#eternity wedding band

[stackableringsny]

Quality Checklist for a Marquise Cut Diamond

If you find yourself drawn towards the Marquise cut diamond, you are not alone. The Marquise cut is one of the most elegant fancy cuts out there. Embodying the flourish of vintage designs and flare of modern ones, the Marquise cut diamond is one of the most coveted cuts in the engagement ring aisle. If you are the kind of bride who gravitates towards untraditional choices in jewelry, then the Marquise is certainly your cut, for it is if nothing but different. 

Here is a checklist of things you want to focus on when buying a Marquise cut diamond at a store. 

The first thing to check when buying a cut like the Marquise is color. The Marquise is an incredible cut that is inherently capable of masking color and blemishes in the stone. Hence, when considering buying a Marquise, you don’t need to worry about getting a clear-looking stone unless you want to. Anything between the color grades A and H is good for the Marquise cut.

Clarity is not that big of a deal with the Marquise cut diamond. Starting with the grade Very Slightly Included, you can go all the way up to Flawless when buying it. A VSI stone will look just as sparkling and clear as an FL in the Marquise cut. So, save some money when you can.

The ideal length to width ratio for the Marquise cut is between 1.75 and 2.05. If you know anything about dimensions in diamond, the Marquise cut is the exact pick for you. It is available in a wide range, and you are free to play around and see what works for you. Even the minutest difference in the ratio makes a visible effect on the shape of the stone. Thus, depending on how plump or skinny you want your stone to be, pick anything from inside this bracket.

The depth of a Marquise cut diamond best be somewhere between 58% and 65%. Between this range, the stones have a depth that looks good in any setting. Therefore, whatever setting you might be having in mind, picking from this range will help maximize the depth of the stone.

You want the table of your Marquise cut diamond to be between 56% and 60%. These are just the exact table sizes for any setting. At these measurements, the table viewed from the top looks neither too big nor too small. It’s just the right size for ample light-catching. 

Symmetry is the primary factor in Marquise cut, and that’s one area you don’t want to skimp.Thus, choose anything between Excellent and Good. Do not go below Good, or you will have picked a stone with poor-quality symmetry, and that will be apparent, no matter the setting.

With polish too, it should be Excellent to Good and no less. 

Fluorescence is another area you want to adopt caution on when buying a Marquise cut diamond. It’s best if the stone does not have any fluorescence. However, if it must, it should be no more than medium. 

#Marquise cut diamond

[stackableringsny]

Is Micro Pave Diamond Setting Right for You?

The bad news – there is no single answer that fits all circumstances and requirements. 

 The good news is – 

It may be if you are on the lookout for something sparkly!

 Whether you are looking for a simple engagement ring or an elaborate wedding band, the micro paves diamond setting can be a good choice. But before you start looking, you need to think this through. 

 When is a micro pave setting good for you? The answer is not difficult to find. 

 For added sparkle – In this setting, tiny diamonds of the same size are set in the band of the engagement ring. And minute prongs are used to keep them in place. Do you realize how it changes the way the center stone is perceived? 

 When you buy a micro pave wedding band or an engagement ring, the stone at the center appears to be quite impressive, whatever carat you have chosen, simply because it is set against the glittering glitz of the smaller stones.     

 For the perfect piece – Since the micro-pave setting is quite a popular choice, you would get several options when you are set to buy the perfect ring for your beloved. All you need to do is decide what is right. 

 If the micro pave diamond ring is for someone who works hard and plays hard, something simple yet exquisite would be ideal. On the other hand, if sheer indulgence is what you are going for, an ornate piece would be the perfect pick. 

 For the sheer beauty – Don’t get it wrong – a typical solitaire isn’t a bad choice. But if you can opt for something truly unique, the micro pave diamond ring can be your right option. Be it for an engagement or wedding. 

 The stunning looks of the line of twinkling stones add to the extravagance. Diamonds are a precise way to show your love and admiration. And don’t we all know – the more, the merrier, or in this case, the shinier. 

 For the continued shimmer – While a regular ring only has a dazzling diamond right in the center, you do not need to confine yourself to this limit. Opt for a micro pave wedding band or engagement ring to add to its loveliness. 

 Brilliant by itself, this particular setting ensures that the sparkle extends beyond the centerpiece. Naturally, the piece of jewelry becomes lovelier when it has that additional luster across the band. 

 For ease in your pocket – Buying a diamond engagement ring or wedding band is quite an expense. The advantage of the micro pave setting is that it is not going to burn a hole in your pocket. 

 And the fact that the setting with the small diamonds provides the ideal site for a central diamond makes it an even better choice. All you need to do is consider your tour budget and find the ring or band that uses the micro pave setting ideal for your beloved.

#Micro Pave Diamond

[stackableringsny]

Why Are Diamonds So Prevalent in Wedding Bands?

Traditionally, the wedding band is just a plain band either made of white or yellow gold. But today, things have changed. It is exceptional rather than traditional. Maybe one among 50 brides is looking for a traditional metal wedding ring. What is more common nowadays is a diamond wedding band. 

 Diamond is associated with eternal love. Hence, it has found a permanent space in wedding bands. A diamond is forever, just like one wants their love or marriage to be. 

 Why are diamonds there in most wedding bands?

 Diamond is a popular choice for wedding bands mainly because of their symbolism. A diamond is appreciated for its strength and enduring nature. This durability of the diamond conveyed a message of forever-ness. A diamond’s purity and sparkle often represent the lifelong commitment of two people toward each other in almost all corners of the world.

 Apart from the symbolic meaning, diamonds are also preferred in wedding bands as they are beautiful and rare. It requires a significant effort to find and cut the stone and bring out brilliant sparkle from it. Since the demand for it is rarely more. 

 Once  diamonds were only for the luxurious and wealthy people. An advancement in mining and cutting technology has made it accessible to the general public. But still, it is treated as a symbol of royalty. Therefore, it is often a cherished possession. 

 Another reason behind the diamond is its popular choice in its versatility. Diamonds go well with almost any metal- yellow gold, rose gold, white gold, or platinum. With diamonds, it is possible to produce different styles by altering the cuts, carats, and fits. It can be a classic solitaire or modern pave design. It is easier to find diamond wedding bands that match personal style and preferences. These precious feelings attached to diamonds have been the reasons behind their popularity.

 But when did diamonds become a symbol of love and commitment?

 Many centuries ago, diamonds were used as decorative pieces to ward off evil spirits. Later, it was used to cure diseases. It was in 1477, the Archduke of Austria proposed to Mary of Burgundy with a diamond-studded ring. The diamonds in the ring were fitted in the shape of an “M”. From there, the trend of gifting diamond rings among the aristocratic and wealthy European nobles started. 

 When diamonds were discovered in South African mines in abundance during the 1870s, diamonds became accessible to the general public. When in 1947, De Beers coined the slogan “a diamond is forever”- the popularity of this gemstone soared high. People began to see the aesthetic brilliance of diamonds and started to consider their unbreakable nature. Because of its nature, they came up with the idea that it is the perfect gem associated with eternal love and marriage.

 It seems that diamonds, as a symbol of love and commitment, have captured the heart and imagination of couples worldwide. Whatever the reason, a diamond wedding band is timeless and a cherished possession for a lifetime. 

[stackableringsny]

Wedding Ring or Wedding Band- Which One is Better

When couples shop for wedding jewelry, they are often confused about what to take-a a wedding band or ring. For many, both bands and rings mean the same, and they are unaware of the subtle differences. Both are symbols of love and commitment. However, wedding bands differ from wedding rings basically in style. When deciding between a wedding ring and a wedding bands for women, there are several factors to consider.

Design

Firstly, it is significant to understand the difference between a wedding ring and a wedding band. A wedding ring is typically a more elaborate piece of jewelry that often features a diamond or other precious gemstones. On the other hand, a wedding band is a simple and more traditional ring made of gold or platinum. Wedding bands are also sometimes referred to as “plain bands,” as they do not have any additional adornments.

Style

It is said that wedding bands are meant especially for men who prefer the elegant look but the simplistic style. And for women, a wedding ring was a better choice because it offers more opportunities for showcasing their extravagant style. However, today both men and women prefer wedding bands. Moreover, the couples are choosing similar-looking bands for themselves. Now, people are selecting comfort over style. So instead of chunky jewelry, they are more inclined to simple minimalistic wedding bands.

Durability

Wedding bands are classic and timeless. Most of the time, they are just simple bands made of platinum or gold. Therefore, these bands are durable. So, if a woman works with her hands or is very active, a wedding band may be the better option as it is less likely to get in the way or become damaged. On the other hand, if a woman works in a professional setting where appearance is significant, a wedding ring may be the better choice as it can be a subtle and elegant way to elevate her look.

While a wedding ring may offer more opportunities for personalization and self-expression, a wedding band is classic and timeless, and often more affordable. At present, it is possible to customize wedding bands. According to the designers, simple diamond wedding bands for women are in demand. They want to match their style with their spouse. If you are looking for more personalized wedding bands, you should talk with the designer beforehand. You should be careful about the fit and make. Checking the size is essential as you will wear the ring daily. 

Ultimately, the decision to choose between a wedding ring and a wedding band comes down to individual or personal preferences and lifestyle. Couples need to take the time to explore their options and choose a ring that reflects their values and commitment to each other. Whether it is a classic gold band or an elaborate diamond ring, the most important thing is that the wedding ring serves as a reminder of the love and commitment shared between two people.

#Wedding Band