#Nzxt phantom 820 water cooling optimal layout

[kiloplot]

Nzxt phantom 820 water cooling optimal layout

#Nzxt phantom 820 water cooling optimal layout zip#

The power supply shroud is also extremely roomy since the HDD cages aren’t installed out-of-the-box, but even when they are installed they can be positioned forward to leave plenty of cable room.Ī recurring theme with Phanteks’ cases, especially the more expensive ones, is that they’re feature-rich to a fault. Credit is due for a really exceptional job here. The straps are placed both at the front of the case and the top edge of the PSU chamber, which covers almost every location that power cables must be routed. Critically, these hooks are open, so the straps can be slipped on and off without having to painstakingly thread them through tiny holes, one of the most frustrating aspects of normal cable tie points. The screws divide each strap into two halves, each of which loops around a hook built into the chassis. This channel has 3cm of clearance for cables, while other areas behind the motherboard tray have just over 2cm. Towards the front of the case, the wide cable management channel is covered with extremely long velcro straps that are screwed into the case. *Spec sheet taken from reviewer’s guide, we don’t necessarily agree with all claimsĪn unusual amount of effort has gone into the cable management system behind the motherboard tray.

#Nzxt phantom 820 water cooling optimal layout zip#

Velcro Strips / Slidable Cable Covers / Zip Tie Mounts The built-in controller has baked-in lighting profiles for those that can’t or don’t want to use control software.Ģ40 mm x 510 mm x 505 mm / 9.45 in x 20.1 in x 20.0 inĮ-ATX*, ATX, micro-ATX, mini-ITX (E-ATX up to 280mm wide)ġ0 (2x included, also supports 2.5” drives)ģ x 120 mm / 3 x140 mm (3 x 140 mm D-RGB included)ġ95/250 mm (4 HDD bottom brackets used/ 2 HDD brackets used) The base model has a reset button, the D-RGB model replaces this with color and mode buttons. Other than the fans, thin strips at the top of the front panel and along the edge of the PSU shroud are lit. The lighting is compatible with the 3-pin 5V headers used by ASUS, MSI, ASRock, etc. Listed specs for the fans are identical other than the LEDs. The base model comes with two 140mm non-RGB fans, the digital version comes with case lighting effects and three 140mm “D-RGB” fans, which is how Phanteks refers to addressable RGB. Like the P400A, the P500A comes in both normal and “digital” variants. Today, we’re reviewing the latest addition to the family, the Phanteks Eclipse P500A Digital, to see whether Phanteks is back on track.

Hard drive: 160GB Seagate Barracuda 7200.The Phanteks P400A Digital was our winner for best overall case in 2019, but our feelings were mixed about the less-expensive P300A because of its single stock fan.

CPU: Intel Core i7-870 CPU overclocked to 3.4GHz.

To load the system, we use a combination of the Unigine Heaven benchmark and the Small FFT test in Prime 95. Having recorded the ambient temperature in front of the main air intake of each case, we're then able to calculate the delta T - the difference between the ambient temperature of our lab and the temperature of the hardware. We record the temperature of the CPU using RealTemp, noting the temperature of the hottest core, and used GPU-Z to log the temperature of the graphics card. We also locked the fan speed on the graphics card to 30 per cent to prevent the automatic speed control interfering with the results. The NF-S12B ULN is a low-airflow fan, so it will highlight cases with poor cooling for the CPU. The CPU is cooled by a Gelid Tranquillo CPU cooler with a Noctua NF-S12B ULN 120mm fan.

#Nzxt phantom 820 water cooling optimal layout