#Saicheng
Text
What are ASTM D1653 and ASTM E96
Water Vapor Transmission, Water Vapor Permeance, Water Vapor Permeability
Water vapor transmission (WVT) is determined by dividing the rate of weight change by the area of the test specimen. Water vapor permeance is in general the degree to which a material admits water vapor. Water vapor permeability is related with the thickness of the material.
Calculation of Water Vapor Transmission, Water Vapor Permeance, Water Vapor Permeability
The permeance and permeability are calculated from the WVT. The permeance is calculated by dividing the WVT by the vapor pressure across the material under test. The permeability is calculated by multiplying the permeance by the thickness of the material.
ASTM D1653 standard and Test Method
ASTM D1653 standard determines the water vapor transmission rate of films of paint,lacquer,vanish, and other organic coatings. The films may be free films or be applied to porous substrates. Under ASTM D1653 standard, there are two test methods: dry cup method and wet cup method.
ASTM D1653 Wet Cup Method
By sealing a film of the test material to the top of a vessel that is filled with water or desiccant, WVT is determined. It is called wet cup method when the vessel is filled with water. The test determines how much water vapor is lost through the film. The dish loses water over the course of the test so that the plot tends downward. The wet cup method is the preferred one for obtaining values that is related to conditions of use where is high relative humid.
ASTM D1653 Dry Cup Method
When the vessel is completed with desiccant, it is called the dry cup method. Through the test method, it is obviously known how much water vapor the desiccant attracts through the film. Meanwhile, the plot points upward as the dish gets water over the course of the test. The dry cup method is the preferred one for obtaining values that is related with conventional dwellings where is lower relative humid.
Rules of ASTM D1653 Test Method
At the beginning of test, the dish may gains or loses weight quickly, and then goes into a constant rate of weight change. Certainly, the process depends on the material being tested.
Attention: By the wet cup method, the values obtained are higher than ones by the dry cup method under the same conditions of air temperature and humidity.
ASTM E96 standard and Test Method
ASTM E96 standard is used to test paper, plastic films, other sheet materials, fiber-boards, gypsum and plaster products, wood products, and plastics. ASTM E96 standard introduces two basic methods: the desiccant method and the water method.
ASTM E96 Desiccant Method
The desiccant method: the test dish contains a desiccant. Leave enough space so that the shaking of the dish to mix the desiccant, which have to be done at each weighing. The test specimen is sealed to the open mouth of the dish. The rate of water vapor movement is determined by periodic weighing of the test dish.
ASTM E96 Water Method
The water method: the dish contains distilled water. Water vapor permeates through specimen into the controlled atmosphere. Through the periodic weighing of the test dish, the values can be obtained.
ASTM E96 Test Method Attention
Under different test conditions, the valued obtained may not be equivalent. As this reason, select the test conditions which are the closest with the conditions of use.
The difference of ASTM E96 standard and ASTM D1653 standard
The testing scope of ASTM E96 standard is more wider, which can evaluate many materials, including coatings which is mainly tested under ASTM D1653 standard.
ASTM D1653 includes directions for preparation of a free film, whereas ASTM E96 does not.
ASTM E96 requires that permeance values exceeding 2 perm are corrected for resistance due to still air and specimen surface. ASTM D1653 does not specify the correction.
Saicheng’ WPT-301B Water Vapor Permeability Tester which adopts gravimetric method complies with ASTM E96 standard and ASTM D1653 standard.
#water vapor transmission#water vapor permeability#ASTM D1653#ASTM E96#test method#dry cup method#wet cup method#desiccant method#water mehod#water vapor permeability tester#Saicheng
0 notes
Text
Automotive Adaptive Front-lighting System Market to be Motivated by Increasing Demand for Safety in Vehicles Globally 2021
Market Analysis
The automotive adaptive front-lighting system is termed for automobiles which are used towards the development of machines which can perform a host of functions and actions without human intervention. Automotive adaptive front-lighting is one such implementation in automobiles. By the reports gathered by Market Research Future (MRFR), the adaptive front-lighting system market is predicted to achieve a good share of profit globally by 2023.
The automotive adaptive front lighting system (AFS) is a part of the adaptive lighting system commonly used in high-end passenger and luxury vehicles. The abundance in car exports has significantly driven the adaptive front-lightening system market.
Get a FREE Report Sample - https://www.marketresearchfuture.com/sample_request/5327
Market Drivers & Constraints
This advanced adaptive front lighting system provides an optimized vision to the driver while driving vehicles during night time or other poor-sight conditions of the road. This system in vehicles optimizes the distribution of light from the headlights, according to compelling circumstances. Adaptive front lighting system redirects low-beam headlamp units in accordance with the steering angle and vehicle speed at night to improve visibility.
In addition, the adaptive front lighting system enhances passenger safety mainly during the night, as it supports active safety and assists in keeping a vehicle under control, thereby preventing vehicle accidents and protection from injury. These are positive driving factors which have helped the demand for an adaptive front lighting system which is likely to rise during the forecast period by 2023.
According to MRFR’s reports, the upward transition of adaptive front-lighting system market is observed mainly due to the adoption of automotive AFLS, which is increasing due to the growing number of accidents at night resulting in severe injuries and fatalities. Recently, many developed countries are trying to reduce road fatalities by encouraging the inclusion of an increased number of safety systems in vehicles, hence enhancing the visibility of the driver on roads.
The growing number of fatalities is leading to the adoption of automotive AFLS, which is identified as one of the key trends that will gain traction in the adaptive front lighting system market during the estimated period.
However, a high initial cost associated with advanced technology automotive adaptive front light may restraint the Automotive Adaptive Front Light Market Size.
Market Segmentation
The global automotive adaptive front light system market has been segmented based on type as Halogen and LED whereas, in-vehicle type, the market has been segmented as a passenger vehicle and commercial vehicle.
Regionally, the global Automotive Adaptive Front Light Market Size is segmented through North America, Europe, Asia-Pacific, Middle East & Africa, and South America.
The Automotive Adaptive Front Light Market Size is currently booming in the Asia Pacific region due to rapidly rising vehicle production, which is eventually one of the primary driving factors for the market to grow. Moreover, improving infrastructure in this region coupling with improving living standards have positively impacted the automotive industry, hence, creating fast demand slots for the automotive adaptive front lighting system. On the other hand, the introduction of vehicle electrification in the Asia Pacific region is also impacting the market with a confident pull.
Meanwhile, North America and Europe are the other two leading regions, mainly due to the established automotive industry. Substantial investments are being made in research & development that ignited ideas to develop new techniques and products to tap into future market trends.
Lastly, automotive adaptive front lighting system market is nourishing in the regions of the Middle East and South America, which is expected to register a steady growth during the forecast period.
Key Players
The key players of global Automotive Adaptive Front Light Market Size are Saicheng Autoparts (China), Hella (Germany), Koito Manufacturing (Japan), Magneti Marelli (Italy), Stanley Electric (Japan), North American Lighting (U.S.), Varroc (U.S.), OSRAM (Germany), Valeo (France), Neolite (China). In 2016, these companies accounted for a share of XX% of the global market.
Get a FREE Report Sample - https://www.marketresearchfuture.com/sample_request/5327
Key Questions Addressed by the Report
What was the historic market size?
Which segmentation (Product/ Capacity) is driving market?
What will be the growth rate?
How are the key players in this market?
What are the strategies adopted by key players?
TABLE OF CONTENTS
1 EXECUTIVE SUMMARY
2 SCOPE OF THE REPORT
2.1 MARKET DEFINITION
2.2 SCOPE OF THE STUDY
2.2.1 DEFINITION
2.2.2 RESEARCH OBJECTIVE
2.2.3 ASSUMPTIONS
2.2.4 LIMITATIONS
2.3 RESEARCH PROCESS
2.3.1 PRIMARY RESEARCH
2.3.2 SECONDARY RESEARCH
2.4 MARKET SIZE ESTIMATION
2.5 FORECAST MODEL
3 MARKET LANDSCAPE
3.1.1 THREAT OF NEW ENTRANTS
3.1.2 BARGAINING POWER OF BUYERS
3.1.3 THREAT OF SUBSTITUTES
3.1.4 SEGMENT RIVALRY
3.1.5 BARGAINING POWER OF BUYERS
3.2 VALUE CHAIN/SUPPLY CHAIN ANALYSIS
4 MARKET DYNAMICS
4.1 INTRODUCTION
4.2 MARKET DRIVERS
4.3 MARKET RESTRAINTS
4.4 MARKET OPPORTUNITIES
4.5 MARKET TRENDS
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Edibles.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.
Media Contact
Company Name: Market Research Future
Contact Person: Abhishek Sawant
Email: Send Email
Phone: +1 646 845 9312
Address:Market Research Future Office No. 528, Amanora Chambers Magarpatta Road, Hadapsar
City: Pune
State: Maharashtra
Country: India
Website: https://www.marketresearchfuture.com
Browse Complete Report - https://www.marketresearchfuture.com/reports/automotive-adaptive-front-light-market-5327
0 notes
Text
Polis, pihak berkuasa hidupan liar mesti menyiasat pembunuhan gajah di Sabah, kata Liew
Polis, pihak berkuasa hidupan liar mesti menyiasat pembunuhan gajah di Sabah, kata Liew
KOTA KINABALU: Pembunuhan gajah gergasi Borneo secara kejam harus disiasat secara menyeluruh oleh pihak berkuasa dan polis hidupan liar, kata Datuk Christina Liew.
Sebagai mengecam serangan kejam terhadap haiwan itu, mantan menteri pelancongan, budaya dan alam sekitar negeri mengatakan semua usaha harus dilakukan untuk menangkap pelaku di sebalik pembunuhan itu di perbatasan Saicheng Plantation…
View On WordPress
0 notes
Video
youtube
Buy it on Amazon - http://ift.tt/2nAkfac - Discount Snowfall Projector LED Lights Wireless Remote, IP65 Waterproof Rotatable White Snow For Christmas Halloween Holiday Party Wedding Garden New Year House Landscape Decorations -- Click the link to buy now or to read the 36 4 & 5 Star Reviews.Subscribe to our Channel: https://www.youtube.com/channel/UCr4glmGiGk4Rj3Kwkc2lh_g?sub_confirmation=1 Like us on Facebook for videos, pictures, coupons, prizes and more - http://ift.tt/2wCDdi2 Discount Snowfall Projector LED Lights Wireless Remote, IP65 Waterproof Rotatable White Snow For Christmas Halloween Holiday Party Wedding Garden New Year House Landscape Decorations This projector light is amazing! I just spent a few minutes to setup, and when it worked, the bright light and beautiful snowfall just brilliant, just looks like real snow! The remote has good range, I can control it from upstairs or across several rooms away. I'd say it will work well on a house and any other wall or even pine trees. Recommend for your Christmas decoration! ... Reviewer : Jason Wong It really doesn't get any easier than this! We tested this out indoors since we got it a little too early to put it up for Christmas yet! Simple and straightforward - plug it in, aim it at your house and let it go! Easily adjusts and seems very sturdy! And as easy as it is to set up, it will be even easier to put it away when the season is over! Gives a nice punch of festive outside lights. I expect we will use this for years to come! ... Reviewer : Ryan.W Click http://ift.tt/2nAkfac to buy now on Amazon or to read more reviews. Dual Control Function: The snow lamp body comes with a button that regulates the speed of the snowfall. Wireless remote control, it can control the switch, speed, flash, timing function Waterproof, heat resistant and cold resistant: High grade waterproof effect IP65. It can work normally on rainy days. But don't soak it directly in water. In hot summer or cold winter, snowfall lights can work normally. Large Projection Area: Just need a snow projector, It's going to shine on the whole house. Romantic snowflakes fall down from the sky and add new atmosphere to our house. Widely Used: snowfall light is used indoors and outdoors. Widely used for Halloween, Christmas, wedding, family gatherings, birthday parties, banquets and other occasions I like this snowflake light quite a bit. It is great received before Christmas. There is a remote control to allow you to set various modes, and also the speed at which the projected images move, or, as the manual says, the speed of the snowfall. The light itself seems fairly solidly made. There is an adapter that the light connects to, and the connection is very solid, and then even screws into position, so that it remains solidly connected. It’s a great fo out door decoration. ... Reviewer : Saicheng Click http://ift.tt/2nAkfac to buy now on Amazon or to read more reviews. ***Let Us Know What You Think… Comment Below!!*** Watch my other review Videos – https://www.youtube.com/channel/UCr4glmGiGk4Rj3Kwkc2lh_g See other products on http://ift.tt/2xhK4Ru Subscribe to our Channel: https://www.youtube.com/channel/UCr4glmGiGk4Rj3Kwkc2lh_g?sub_confirmation=1 Like us on Facebook for videos, pictures, coupons, prizes and more - http://ift.tt/2wCDdi2 #LEDshope, #Snowfall Projector LED Lights Wireless Remote, IP65 Waterproof Rotatable White Snow For Christmas Halloween Holiday Party Wedding Garden New Year House Landscape Decorations This is a review video for : B076F8D2WP Manufacture : LEDshope Thanks for watching! http://ift.tt/2xhK4Ru Related Videos in Channel
0 notes
Text
New Post has been published on Los mejores bolsos bolsos mujeres famosas marcas tienda
New Post has been published on http://famoushandbags.magiclick.info/products/saicheng-grandes-nuevas-mujeres-de-hombro-bolsos-de-senoras-bolsos-de-cuero-de-cocodrilo-bolsos-de-las-mujeres-de-marcas-famosas-bolsos-de-totalizadores-2016-negro-sac-espagnol/
SAICHENG Grandes Nuevas Mujeres de Hombro Bolsos de Señoras Bolsos De Cuero de Cocodrilo Bolsos de Las Mujeres De Marcas Famosas bolsos de Totalizadores 2016 Negro Sac Espagnol
nota 1:1 pulgada = 2.54 cm; 1 cm = 0.39 pulgadas
nota 2: Debido a diversas hornadas que producen, puede haber desviación de 1. 0 …. 1.5 cm para los artículos.
nota 3: Los Colores en el monitor del ordenador pueden diferir ligeramente de los colores reales del producto dependiendo de su monitor settings.
nota 4:bolsa es hecho a mano, buena calidad. cada lote de piezas pequeñas tiene no es lo mismo
0 notes
Photo
طقم حقائب نسائيه 3 قطع SAICHENG النوع : 00694 نقاط المكافآت : 9 نبذه مختصره عن السلعه: الماركه: SAICHENG مصنوعه من الجلد الصناعي الفاخر المقاس كما هو موضح بالصور متاحه بعدة الوان الطقم عباره عن ثلاث قطع عحيبه كبيره وحقيبه صغيره ومحفظة بطاقات إذا كانت السلعه التي تبحث عنها غير معروضه تواصل معنا وسنقوم بعرضها لك بأقل تكلفه. لطلب السلعة والمواصفات بالكامل مع باقي الصور على الرابط التالي : http://alwasetshop.com/index.php?route=product/product&product_id=742 إجمالي التكلفه واصلة الى مدينة الدمام 190 ريال سعودي ويضاف مبلغ 25 ريال رسوم شحن الى مدينتك على كامل طلباتك هذه السلعه نظام طلب خاص من خارج المملكة وليست شحن مباشر من السعودية للطلب في السعوديه من خلال واتساب 0508740659 / 0570260707 للاطلاع على السلع الاخرى التي بامكانك طلبها ايضاً ,من خلال الرابط http://alwasetshop.com/ #الوسيط_شوب #الرياض #الدمام #جدة #بريده #المدينة_المنورة #مكة #ينبع #الطائف #الجبيل #حائل #حفر_الباطن #عنيزه #الخبر #القطيف #الاحساء #الخرج #القصيم #بقيق #مدينة_الملك_خالد_العسكرية #البحرين #نجران #خميس_مشيط #أبها #جازان #دومة_الجندل #عرعر #سكاكا #عروض
#سكاكا#الجبيل#البحرين#مدينة_الملك_خالد_العسكرية#المدينة_المنورة#الخبر#عنيزه#عروض#حفر_الباطن#نجران#حائل#الرياض#الدمام#خميس_مشيط#الطائف#عرعر#بقيق#أبها#جدة#مكة#ينبع#الخرج#القصيم#بريده#الاحساء#الوسيط_شوب#القطيف#دومة_الجندل#جازان
0 notes
Text
ASTM D1653 Standard and Test Method
Water Vapor Transmission, Water Vapor Permeance, Water Vapor Permeability
Water vapor transmission (WVT) is determined by dividing the rate of weight change by the area of the test specimen. Water vapor permeance is in general the degree to which a material admits water vapor. Water vapor permeability is related with the thickness of the material.
Calculation of Water Vapor Transmission, Water Vapor Permeance, Water Vapor Permeability
The permeance and permeability are calculated from the WVT. The permeance is calculated by dividing the WVT by the vapor pressure across the material under test. The permeability is calculated by multiplying the permeance by the thickness of the material.
ASTM D1653 standard and Test Method
ASTM D1653 standard determines the water vapor transmission rate of films of paint,lacquer,vanish, and other organic coatings. The films may be free films or be applied to porous substrates. Under ASTM D1653 standard, there are two test methods: dry cup method and wet cup method.
ASTM D1653 Wet Cup Method
By sealing a film of the test material to the top of a vessel that is filled with water or desiccant, WVT is determined. It is called wet cup method when the vessel is filled with water. The test determines how much water vapor is lost through the film. The dish loses water over the course of the test so that the plot tends downward. The wet cup method is the preferred one for obtaining values that is related to conditions of use where is high relative humid.
ASTM D1653 Dry Cup Method
When the vessel is completed with desiccant, it is called the dry cup method. Through the test method, it is obviously known how much water vapor the desiccant attracts through the film. Meanwhile, the plot points upward as the dish gets water over the course of the test. The dry cup method is the preferred one for obtaining values that is related with conventional dwellings where is lower relative humid.
Rules of ASTM D1653 Test Method
At the beginning of test, the dish may gains or loses weight quickly, and then goes into a constant rate of weight change. Certainly, the process depends on the material being tested.
Attention: By the wet cup method, the values obtained are higher than ones by the dry cup method under the same conditions of air temperature and humidity.
Saicheng’ WPT-301B Water Vapor Permeability Tester which adopts gravimetric method complies with ASTM E96 standard and ASTM D1653 standard.
#water vapor transmission#water vapor permeance#water vapor permeability#ASTM D1653#standard#test method#wet cup method#dry cup method#ASTM D1653 wet cup method#ASTM D1653 dry cup method#gravimetric method#water vapor permeability tester#WPT-301B#Saicheng
0 notes
Text
What is Pressure-Sensitive Tape
Pressure-Sensitive tape is also known as PSA tape, adhesive tape, self-stick tape, sticky tape, etc. A pressure-Sensitive tape which includes duct tape, electrical tape, masking tape, packaging, double-sided tape, bandages, is an adhesive tape with pressure. The production and application of pressure-sensitive tape have nothing to do with solvents or heat.
Saicheng's BLD-200H Peel Strength Tester is a professional instrument which can be used to test peel strength of adhesive laminated products, medical adhesive bandage, release paper, and protective films.
#pressure sensitive tape#PSA tape#adhesive tape#self stick tape#sticky tape#duct tape#electrical tape#masking tape#package#double sided tape#bandage#peel strength#adhesive laminate#medical bandage#release paper#PE#manufacture#productquality#innovation
1 note
·
View note
Text
How to Test Adhesion with ASTM D3330 Standard?
ASTM D3330 standard is to test peel adhesion of the pressure-sensitive tape.
ASTM D3330 Adhesion Standard Test Method
In terms of ASTM D3330, there are six test methods with different conditions required and the type of pressure-sensitive.
Test method A measures the adherence of a single-coated tape which applies to a standard test panel with controlled pressure as the tape is peeled at 180 angles.
Test method B measures the adherence to the backing of a single-coated tape. Test method B is similar to test method A. The difference between the two is that one tape is applied to the backing of another tape. Then, the rest process is the same as that of test method A.
ASTM D3330 Adhesion Standard Instrument
The above two methods are used widely compared to other four ones. With ASTM D3330 standard, Saicheng's BLD-200H Peel Strength Tester is a professional instrument that can be used to test peel strength of adhesive laminated products, medical adhesive bandage, release paper, and protective films.
#astm#astm standard#international standard#test machine#adhesion#peel force#asian test#pharmaceutical test#laboratory test#research institution test
0 notes
Text
What is Adhesion of Pressure-sensitive Tape?
Pressure-Sensitive Tape
Pressure-Sensitive tape is also known as PSA tape, adhesive tape, self-stick tape, sticky tape, etc. A pressure-Sensitive tape which includes duct tape, electrical tape, masking tape, packaging, double-sided tape, bandages, is an adhesive tape with pressure. The production and application of pressure-sensitive tape have nothing to do with solvents or heat.
Adhesion of Pressure-Sensitive Tape
A pressure-Sensitive adhesive coated and a backing material (such as paper, plastic film, cloth, or metal foil) can be formed a tape. Some tapes have removable release liners. Some tapes are special, which have layers of adhesives, primers, release agents, filaments, printing, etc. About concerning tape, adhesion is an important factor. It is an essential step to measure peel adhesion of the pressure-sensitive tape.
The Instrument for Testing Adhesion of Pressure-Sensitive Tape
Saicheng's BLD-200H Peel Strength Tester is a professional instrument which can be used to test peel strength of adhesive laminated products, medical adhesive bandage, release paper, and protective films.
0 notes
Text
Abrasion Resistance Tester
Importance of Abrasion Resistance
Abrasion resistance refers to the property of materials and structures to withstand abrasion. Abrasion resistance leads to retaining the integrity and form of materials. Generally, the abrasion resistance of a material tends to withstand mechanical action.
Ink Rub Tester with ASTM D5264
ASTM D5264 standard provides a procedure for testing abrasion resistance.
Saicheng's RT-01 Ink Rub Tester is manufactured with ASTM D5264 standard. RT-01 ink rub tester can be used to measure the abrasion resistance of printed inks, coatings, laminates, and substrates. The testing values of RT-01 ink rub tester are the professional suggestions for both the buyer and the seller which need to know if the product complies with the predetermined standard.
#abrasion#abrasion resistance#tester#withsatnd abrasion#astm d5264#astm standard#international standard#ink#ink rub#ink rub tester#printed ink#printed coating#laminate#measure#instrument#testing
0 notes
Text
ASTM D3654 Shear Adhesive Temperature Test Method
ASTM D3654 standard includes 8 test methods. The most advanced test method is Procedure H, which is processed under specialized conditions (at an elevated temperature and after a 10-min dwell time at the elevated temperature).
As the pressure-sensitive tape is applied to a vertical standard steel panel, a standard mass is attached to the free end of the tape and the time to failure is determined, and the value of shear adhesion is obtained. The durative time of procedure H is less than that of other procedures. The test method requires specified mass or 1000g±5g mass (include mass of clamp or hook).
With Saicheng's WKC-6S Temperature Control Lasting Adhesive Tester, the pressure-adhesive tape is attached on the test panel under the specified mass at the settable temperature. Calculating adhesion is based on the time when the specimen moves for a certain distance (or completely fail) or the distance of displacement within a certain time (or completely fail).
0 notes
Text
What is ASTM D3654 Test Method
ASTM D3654 standard aims to measure the ability of pressure-sensitive tapes to remain adhered under constant load that is applied parallel to the tape's surface.
A-H test method is included. Each test method points to different test materials and requires specialized testing instruments.
ASTM D3654 standard includes 8 test methods. The most advanced test method is Procedure H, which is processed under specialized conditions (at an elevated temperature and after a 10-min dwell time at the elevated temperature).
With Saicheng's WKC-6S Temperature Control Lasting Adhesive Tester, the pressure-adhesive tape is attached on the test panel under the specified mass at the settable temperature. Calculating adhesion is based on the time when the specimen moves for a certain distance (or completely fail) or the distance of displacement within a certain time (or completely fail).
#astm d3654#astm standard#international standard#lasting adhesive tester#adhesion#adhesive tape#pressure-sensitive tape#test method
0 notes
Text
What is Shear Adhesive Temperature Test Method?
ASTM D3654 standard aims to measure the ability of pressure-sensitive tapes to remain adhered under constant load that is applied parallel to the tape’s surface.
A-H test method is included. Each test method points to different test materials and requires specialized testing instruments.
ASTM D3654 standard includes 8 test methods. The most advanced test method is Procedure H, which is processed under specialized conditions (at an elevated temperature and after a 10-min dwell time at the elevated temperature).
As the pressure-sensitive tape is applied to a vertical standard steel panel, a standard mass is attached to the free end of the tape and the time to failure is determined, and the value of shear adhesion is obtained. The durative time of procedure H is less than that of other procedures. The test method requires specified mass or 1000g±5g mass (include mass of clamp or hook).
With Saicheng's WKC-6S Temperature Control Lasting Adhesive Tester, the pressure-adhesive tape is attached on the test panel under the specified mass at the settable temperature. Calculating adhesion is based on the time when the specimen moves for a certain distance (or completely fail) or the distance of displacement within a certain time (or completely fail).
#shear adhesive#adhesive temperature#test method#astm d3654#astm standard#international standard#lasting adhesive#tester#labratory test
0 notes
Text
Shear Adhesion Standard
In terms of shear adhesion, there are two types of tests. One is static shear test, the other is dynamic shear test.
Dynamic Shear Test and ASTM D1002 Standard
Dynamic shear test is specially conducted in sets of extreme testing conditions, which is a meaningful suggestion for engineers. There is a correspondence relationship between dynamic shear test and ASTM D1002 standard.
Static Shear Test and ASTM D3654 Standard
Static shear test aims to measure the ability of pressure-sensitive tapes to remain adhered under constant load that is applied parallel to the tape’s surface. Static shear test corresponds to ASTM D3654 standard.
ASTM D3654 Standard Tester
ASTM D3654 standard includes 8 test methods. The most advanced test method is Procedure H, which is processed under specialized conditions (at an elevated temperature and after a 10-min dwell time at the elevated temperature).
Saicheng’s WKC-6S Temperature Control Lasting Adhesive Tester is conducted to test the shear adhesion of pressure-sensitive tapes.
#shear adhesion#dynamic shear#static shear#astm d1002#astm d3654#international standard#temperature adhesion#lasting adhesive#tester
0 notes
Text
Static Shear Test and ASTM D3654 Standard
Static shear test aims to measure the ability of pressure-sensitive tapes to remain adhered under constant load that is applied parallel to the tape’s surface. Static shear test corresponds to ASTM D3654 standard.
Saicheng's WKC-6S Temperature Control Lasting Adhesive Tester is conducted to test the shear adhesion of pressure-sensitive tapes.
#shear#static shear#test#astm d3654#adhesive tape#measure#pressure-sensitive tape#astm standard#temperature#temperature control#temperature adhesion
0 notes
Last Seen Blogs
cookx2
Cookx2
cookx2
Cookx2
st-just
Forgotten days encased in bone and meat
apo-to-tipota-sto-kati
ai pes esu
sideblog-slx99-azalea-maedre13
sideblog-slx99-azalea-maedre13