An introduction to SureSigns VS3 by Philips and Dash 2500 by GE healthcare
SureSigns VS3 by Philips and Dash 2500 by GE healthcare are among the most popular patient monitoring devices used in healthcare settings for monitoring vital signs and patient status. Philips VS3 Monitor is especially popular for its easy to use and intuitive interface that allows clinicians to put their full focus on patient care and comfort. This device offers peace of mind and flexibility in a compact package. SureSigns VS3 by Philips comes with innovative pop-up screens, fixed keys, and icon-based menus provide quick access to frequently used features. There is a trim knob present in this device that provides easy navigation through settings. A clearly visible icon is lit when the battery is plugged in/charging so that caregivers can easily see when the device is available for use.
Coming to GE DASH 2500, this device is meant to deliver a new standard of clinical excellence to patients in sub-acuity settings. It leverages the powerful capabilities of the clinically-advanced family of Dash monitor. As a result, Dash 2500 monitor is able to deliver impeccable performance without costing too much. It is a cost-effective yet highly efficient patient monitor that provides hospital staff with the clinical intelligence it would require to both assess and treat the patients with precision, accuracy and speed. Dash 2500 by GE healthcare features sophisticated clinical parameters that helps capture vital patient measurements and exceptional cardiac monitoring in order to accurately detect arrhythmias.
Advanced biomedical repair solutions for SureSigns VS3 by Philips and Dash 2500 by GE healthcare are also readily available today.
*Now that they are in the smeltery, Tsumugi sees two enormous automated lava vats at work above her as sweat stream down her face. She grabs them and tosses them in Shuichi's direction using her Nanokumas.
Hrgh! Hoo! Hahahaha! Yah! HEEE!?
Ngh! Huh?
*Shuichi utilizes the Symmetra Matrix to heighten his leap, landing on the first vat and dancing quickly on the hot metal before leaping off it and flying past Tsumugi. He barely makes it past the next vat's spilled contents before spotting Tsumugi's arms and tendrils gripping the platforms above him.
HAAAH!
*CRAASH!*
???: M̸A̸K̶E̸ ̸A̶ ̷T̵R̶A̷M̷P̸O̸L̴I̷N̴E̶!̶
HRRGH!
*SHA-WOOOH!* *SMASH!* *CRASH!*
AGGHCK!!?
*Tsumugi's Nanomachines pull on the platforms and cause them to crash down on Shuichi, but he utilizes the Symmetra to create bouncy surfaces, as the voice in his ear commands him to do. Tsumugi avoids the damage by boosting herself into the air.
HRAGH!
*SLAAAM!*
UGH!
*She then casts a line forward and sends her entire body smashing straight into Shuichi, sending him tumbling along the ground. Shuichi crawls to his hands and knees, spitting some blood out of his mouth on the floor.
You said Rantaro gave you that Matrix before he died, but it's wasted on trash like you...Rantaro couldn't use that stupid light to stop me, what makes you think you can do the same?
Well...you know what? You might be right...The Symmetra...and I alone won't be enough to beat you.
You finally get it...?
But...I'm not alone, Shirogane...I never have been...
NOW!
Huh!?
HRRGGH!
*With Shuichi's shout, Tsumugi suddenly notices that Kaito and Kokichi are in a control room high above them, cut off from reinforced glass, watching their fight. As Shuichi gives the signal, they work together to pull a lever on the control deck.
*FWOOOM!*
What the hell-
HYAAAGH!
AAGGH! G-GGAAAAAAAAAAAAAAHHH!
*Tsumugi jumps as a machine behind her starts to spew flames, but her yell of surprise quickly becomes a scream of agony as Shuichi jumps up and kicks her into the fire.
Hrggh!
H-Huh!? AGH! HHAAAGH!
*Attempting a power move of some kind, Tsumugi attempts to cast out her Nanokuma's and pull Shuichi into the fire with her. To her shock and horror, however, the Nanokuma's catch alight, and the flame spreads all the way along her, burning and scarring her flesh underneath them. With little other choice, she rolls out of the fire, slightly burned. Shuichi holds up a shield to allow himself to walk through the flames unharmed.
Aah...Ngh...!
*Tsumugi is blue in the face with nerves, as she tries to recall the Nanokuma's, and notices that her previous power has drained significantly, only able to summon just enough to make a claw on her hand. Shuichi purses his lips, expecting and planning for this exact outcome.
This was a tentative theory, but it seems to have worked out as I intended. The Nanokuma's can't regenerate in extreme heat, and they're highly flammable due to their small size and the substance their wings are made of.
You ever heard the phrase "like a moth to a flame?" Well, that's funny for MULTIPLE reasons now...
GRRRGH! J..JRREAAAAAAGGGH!!
Tch...HAAAGH!
GO SHUICHI!
YOU GOT THIS SHUMAI! KICK HER ASS!
*Kaito and Kokichi continue to flip switches and press buttons to get more machines to spew out flames, limiting Tsumugi's options. However, this doesn't stop her. She shapeshapes the nanos to surround herself with as many weapons and armor as possible. In the meantime, Shuichi prepares to confront her head-on by wielding a blaster in one hand and a blade in the other. Thereafter, a vicious hand-to-hand battle breaks out between the evil Cosplayer and the brave Detective.
I don't have this on the pinned but since I'm seeing mad Viva Piñata fans in the tag, I have no problems changing the image if it doesn't reflect the character properly!
Also, feel free to send in Propaganda for characters that are on the roster that haven't appeared in the first round yet. I have a bunch that were preselected so I don't have prop for them and it feels a little sad.
And since it's drawing close to the end of the first round polls, I'll state it again.
If there's a difference of 5% or less between the two, both contestants will move on to the next round where it will be a vs3 way with the next contestant.
Avec la Batterie Philips LI3S200A restez productif plus longtemps qu'avec une batterie standard. Cette batterie pour Philips Kingway G40 Li3S200A GS10 G30 GS20 longue durée sera rapidement pour vous l'accessoire indispensable afin de rester opérationnel en toutes circonstances. Meilleure qualite, prix de gros, large gamme de produits.
Ce Batterie pour Philips LI3S200A contient des composants électroniques avancés et a été testé en accordance avec les standards très stricts de la CE. Protection contre la surtension, la surchauffe et les court-circuits avec interrupteur thermique intégré.
Batterie Philips Kingway G40 Li3S200A GS10 G30 GS20 haute capacité pour une meilleure autonomie en veille.
Conçue et testée pour garantir une longévité optimale.
1 ans de garantie, 30 jours remboursé, 100% neuf!
La capacité de la batterie (mAh/A/W) peut être différente; plus elle affiche de mAh/A/W, plus son autonomie est élevée. Certifiée en sécurité CE / FCC / RoHS.
Les numéros remplacés(P/N):
LI3S200A
Les modèles compatibles:
Philips Kingway G40 Li3S200A GS10 G30 GS20
Conseils d'utilisation de la batterie:
① Lorsque vous utilisez votre nouvelle batterie la première fois, déchargez la batterie quand son autonomie atteint 2%, puis rechargez-la jusqu'à 100%.
② Utilisez votre batterie à des températures inférieures à 40 °C.
③ Rechargez votre batterie avant de passer sous les 10 % de sa charge.
④ Il est également inutile de charger complètement votre batterie avant une longue période sans utilisation.
Conseils d'entretien
La batterie pour Philips LI3S200A doit subir au moins une charge par mois pour se préserver de l'effet mémoire et éviter que sa tension ne chute trop bas. Une batterie au repos trop longtemps risque de perdre ses performances, voire de ne plus fonctionner du tout.
Ne laisser jamais descendre votre batterie Lithium ion en dessous de 20% de capacité avant de la recharger
La batterie pour Philips LI3S200A est livrée avec un reliquat de charge. Il est nécessaire de la charger avant son utilisation. Il est également recommandé de charger et décharger votre nouvelle batterie pour Philips LI3S200A 2 à 5 fois pour obtenir sa capacité maximale.
An overview of Philips IntelliVue G5 Anesthesia Gas Module and Philips Suresign VS3 patient monitor
Philips offers a number of biomedical equipment that is designed to raise the quality of care, as well as streamline workflow and improve productivity at hospitals. Philips IntelliVue G5 Anesthesia Gas Module and Philips Suresign VS3 patient monitor are two of the most popular options for such equipment.
Philips IntelliVue G5 Anesthesia Gas Modules
PHILIPS G5 gas module helps in measuring the five most commonly used anesthetic gases, along with carbon dioxide (CO2) and nitrous oxide (N2O). Waveforms for gases tend to be displayed on patient monitors. Philips IntelliVue G5 is ideal for lower-acuity settings, and is known to be available with advanced capabilities. This makes it practical for use in higher-acuity environments. Philips IntelliVue G5 can automatically identify agents and features mixed-agent measurement capability. The fast oxygen (O2) measurement based on advanced paramagnetic technology is included with the standard G5.
Philips IntelliVue G5 is compact, durable, and easy to maintain. The gas sensors in this anesthesia gas module do not have any such moving parts, and hence are pretty dependable. Zero calibrations are completed automatically during warm-up in this gas module, and it does have a wide range of mounting options.
Philips Suresign VS3 patient monitors
Philips VS3 Monitor is known to blend vital measurements with a high degree of simplicity. The compact size of such patient monitors makes it perfect for almost any healthcare environment. Philips Suresign VS3 is quite easy to use, and has a simple navigation that contributes to its high efficiency. The lightweight makes and rechargeable battery of the patient monitor facilitates portability. This patient monitor can store up to 400 patient records, which increases competency in patient monitoring to a good extent. The pop up and icon menus present on the Suresign VS3 patient monitor allow for quick access to frequently used features, which are all displayed on a full color screen. This powerful patient monitor can be used to measure and monitor adult, pediatric and neonatal patients. Suresign VS3 patient monitor comes with lithium battery and ac power cord, and can effectively sync to the nurses station alarm. It is also equipped with the feature of bar code scanning to input patient information, and supports data and software updates via a USB port.
In addition to Philips IntelliVue G5 Anesthesia Gas Module and Suresign VS3 patient monitor, Philips M1355A TOCO Transducer is also extensively used in many hospitals today. Detailed insight into PHILIPS 1355 A , and various other biomedical equipment offered by Philips can be found online. You can always buy such equipment through any dependable local vendor.
*Tsumugi arrives at another control center in the factory in a manufacturing line. In order to make her escape from the V3 crew, she tries to hijack the conveyers, but before she can...
GET BACK HERE!
*BANG!* *BANG!*
Hngh...HRAAGH!
WATCH IT!
*SLAAM!*
UGH!
*Kokichi catches up and shoots her, but as before, his bullets do nothing when blocked by the Nanokumas. Tsumugi turns around and tries to pound him into the ground with a heavy swarm of them, which he only avoids as Kaito dive tackles him out the way.
Come on Kokichi, I thought you were smarter than this! You're always scheming, so come up with something that actually works instead of just brainlessly trying to kill me!
You want me to stop trying to kill you!? Stop giving me REASONS to!
You think you care? You DON'T!
*SMAACK!*
Get in cover!
Ah!
*Kaito and Kokichi are forced to hide behind a wall as Tsumugi brings the claws down again, slashing at the floor beneath them.
All you are is a manipulative, enigmatic schemer and LIAR! Don't PRETEND like you actually GIVE a damn! You just want an excuse to play hero and gain everyone's trust to lure them into a false sense of security!
I...
For someone who claims to be so knowledgeable about us all, you sure don't know this asshole very well!
Huh?
What did you say?
It surprised me too, y'know? But I've SEEN Kokichi show empathy. Even if it's not us, he's got his own family he cherishes!
He's HERE to FIGHT to PROTECT them! He's HERE to STOP you from HURTING them! So don't you dare degrade him like that!
...
Aw, how cute...Looks like that locked hangar scene did a lot for your relationship. You're WELCOME for that by the way...!
*SLAASH!*
GAAGH!
KAITO!
*Tsumugi slashes the wall the two hide behind with her claw and cut it apart. Kaito's back also gets slashed and his coat is torn through.
Maybe you're living luxury now, but don't forget where you CAME from! Don't forget who MADE you! ME!
*SLAM!* *SLASH!* *STOMP!*
GEEGH!
HRGH!
*Kaito and Kokichi try to dodge all of Tsumugi's incoming attacks, but the Nanokumas are able to scratch them up badly.
Every good thing you have now started because I MADE you something MORE! Everything you love and cherish came from ME! You shouldn't be fighting me, you should be BOWING in GRATITUDE!
You moron! You've gone completely insane!
You got that right, you ungrateful loser! I gave you EVERYTHING, and now it's MY right to take it-!
- Who was the Emperor of Rome at that time? [vs1]
- What did John preach as he went from place to place around the Jordan? [vs3]
- What did John replied to the crowds; soldiers; tax collectors when they asked “What should we do?” [10-14]
- Did John said that he was the Messiah? [15-17]
* The Baptism of Jesus
- What happen when Jesus was baptised? [vs21-22]
* The Ancestors of Jesus
- How old was Jesus when he began His public ministry? [23]
- Jesus was traced back to whom as His Father? [38]
Blessed reading to all!
PS- don’t just like this post, read and answer also! God bless! 🙂