#page 7013

[pesterloglog]

Calliope, Jade Harley

Act 6, page 7009-7013

CALLIOPE: this was yoUr home?

JADE: m hm!

JADE: well, sort of

JADE: it looked more realistic when i lived here

CALLIOPE: ah, yes. i recognize it now.

CALLIOPE: it's jUst like jake's home, bUt with less foliage.

JADE: foliage?

CALLIOPE: on his earth, these hills were covered in trees.

CALLIOPE: in yoUrs i sUppose there was more care given to landscaping. :U

JADE: huh!

JADE: thats interesting

CALLIOPE: is it?

JADE: ummm

CALLIOPE: i'm not sUre that it is, particUlarly.

JADE: heheh yeah i guess not

CALLIOPE: bUt it is very nice here, even if it is only a stylistic approximation of yoUr home.

CALLIOPE: pity there are no trees thoUgh.

CALLIOPE: i have never actUally seen one.

JADE: you havent?

CALLIOPE: come to think of it,

CALLIOPE: i have never even seen a plant... u_u!

JADE: :O

CALLIOPE: plenty of meat thoUgh!

CALLIOPE: meat was left for Us in great sUpply.

CALLIOPE: candy too.

CALLIOPE: bUt nary a plant for as far as the eye coUld see.

JADE: that sounds terrible!

JADE: when i was a kid i grew up with plants all around me

JADE: but i was very lucky... i guess i took all the nice things about my life on this island for granted

JADE: i even had my own garden where i grew flowers and vegetables and fruits and such

JADE: that is all i ever ate, the things i grew myself

CALLIOPE: ooh!

JADE: but i will admit to having developed a taste for meat since becoming a dog <_<;

CALLIOPE: meat is very good.

CALLIOPE: for all the complaints i might have aboUt my childhood, near exclUsive sUbsistance Upon raw flesh is not one.

CALLIOPE: bUt then, i am sUre that comes with the territory of being a monster. heh.

JADE: :o

CALLIOPE: i didn't mean to change the sUbject.

CALLIOPE: please tell me aboUt yoUr garden!

JADE: my grandpa set it up for me in the atrium

JADE: i would spend hours tending to my plants and playing music for them

JADE: it was one of the places where i was the happiest i can remember being

JADE: i miss that garden

CALLIOPE: what happened to it?

JADE: it blew up

JADE: and then i built my house waaaay up, on top of where it used to be

JADE: in the years since that happened i thought about rebuilding it

JADE: as a way to pass the time on my long lonely journey...

JADE: but i was too depressed to grow anything

CALLIOPE: hm, yes.

CALLIOPE: i believe i can sympathize.

JADE: what sort of place did you grow up in that didnt have plants?

JADE: was it a desert?

CALLIOPE: of sorts, yes.

CALLIOPE: it was earth, actUally.

JADE: ???

CALLIOPE: my earth was mUch less hospitable toward life than yoUrs.

CALLIOPE: i am sUre i was the only living thing left on the planet.

JADE: that sounds lonely

CALLIOPE: it was.

JADE: but didnt you say meat was left for "us" earlier

CALLIOPE: oh.

JADE: was someone else there?

CALLIOPE: yes.

CALLIOPE: technically.

CALLIOPE: bUt he was only there while i slept.

JADE: who?

CALLIOPE: my brother.

JADE: oh!

JADE: i had a brother too

JADE: its funny we keep discovering ways that we are alike

CALLIOPE: yes, bUt not so mUch in this way.

CALLIOPE: for one thing, yoU and yoUr brother never detested each other, to my knowledge.

CALLIOPE: also yoU and he spent most of yoUr lives apart.

CALLIOPE: to yoU i'm sUre it seemed a crUelty to grow Up so divided.

CALLIOPE: bUt to me that woUld have been a great liberty.

JADE: this is where you and your brother lived?

CALLIOPE: u_u

#homestuck #calliope #jade harley #homestuck act 6 #page 7009 #page 7010 #page 7011 #page 7012 #page 7013 #homestuck act 6 act 6 #homestuck act 6 act 6 intermission 4

[tomoleary]

“Specialty Illustration: Neal Adams, Ross Andru, John Buscema, Dave Cockrum, Dick Dillin, Jose Garcia-Lopez, Gil Kane, Joe Kubert, Rudy Nebres, Wendy Pini, Frank Thorne, Mike Royer, Joe Sinnott, and Bob Layton Original Art (c. 1980-81) From the Hyborian Age to the Space Age and all realms in between, this magnificent jam page has it all. Cutter and Skywise of Elfquest, Hawkman, Doctor Strange, Deadman, Red Sonja, Conan, Rex of Star Hawks, the original Human Torch, Sub-Mariner, Flash, and Silver Surfer grace this incredible piece.”

https://comics.ha.com/itm/original-comic-art/specialty-illustration-neal-adams-ross-andru-john-buscema-dave-cockrum-dick-dillin-jose-garcia-lopez-gil-kane-/a/7013-93057.s?ic4=GalleryView-ShortDescription-071515

[jubaer01]

FOR NORWEGIAN CITIZENS - VIETNAMESE Official Urgent Electronic Visa - eVisa Vietnam - Online Vietnam Visa

Rask og rask Vietnam elektronisk visum online, offisielt Vietnam turist- og forretningsvisum

Address : Schultzgt. 1 , N-7013 Trondheim , Norway

Phone : [phone]

Email : [email protected]

Website : https://www.vietnam-e-visa.org/no/visa/ 

Business Hours : 24/7/365

Owner / Official Contact Name : Ria Holden Vanessa

Description : Regjeringen i Vietnam har introdusert den enkleste, raskeste og enkleste metoden for å søke om Vietnam Visa Online på denne nettsiden. Du kan nå fylle ut Vietnam Visa Online Application Form fra luksusen til hjemmet ditt uten å besøke Vietnams ambassade. Fyll ut skjemaet på et par minutter, last opp ansiktsbildet og passsiden og foreta betaling online. Etter noen dager vil du motta vietnamse eVisa på e-post. Du kan besøke flyplassen eller havnen med en gang uten å gå til vietnamsiske ambassade. Det er også et fysisk eller papirstempel som kreves på passet ditt. Denne elektroniske prosessen også kjent som eVisa eller elektronisk visum for Vietnam er tilgjengelig for 80 land. Hvis du er fra et av disse heldige landene, kan du hoppe over køen for å søke på Online Portal for Vietnam Visa. Du kan ta bildet fra mobiltelefonen din og sende oss en e-post hvis du ikke kan laste opp. Du må ha med originalt pass til flyplassen slik at immigrasjonsoffiserene på flyplassen kan stemple passsiden din for innreise til Vietnam. Passet ditt må også være gyldig i 180 dager på datoen for innreise til Vietnam. Følgende land er kvalifisert for Vietnam Online Visa aka eVisa Vietnam, Belgia, Nederland, India, Nauru, Portugal, Kroatia, Russland, Spania, Salomonøyene, Qatar, Tyskland, Liechtenstein, Argentina, Polen, Hellas, Australia, Brunei, USA , Danmark, Romania, Brasil, Malta, Bulgaria, Finland, Island, Aserbajdsjan, Filippinene, Saint Lucia, Irland, Mexico, Peru, Slovakia, Venezuela, Norge, Georgia, Mongolia, Estland, Slovenia, Litauen, Colombia, Papua Ny-Guinea, Serbia, Kasakhstan, Uruguay, De forente arabiske emirater, Sverige, Korea, Armenia, Fiji, Montenegro, Sveits, Andorra, Cuba, Latvia, Kambodsja, Monaco, Canada, New Zealand, Italia, Frankrike, Luxembourg, Marshalløyene, Vanuatu, Kypros, Makedonia, Ungarn, Tsjekkia, Japan, San Marino, Bosnia-Hercegovina, Moldova, Hviterussland, Storbritannia, Panama, Østerrike, Montserrat, Mikronesia, Chile.  Government of Vietnam has introduced the simplest, quickest and easy method to apply for Vietnam Visa Online on this website. You can now fill out the Vietnam Visa Online Application Form from the luxury of your home without visiting Vietnam Embassy. Fill the form in couple of minutes, upload your face photograph and passport page and make payment online. After a few days you will receive vietnamse eVisa by email. You can visit the airport or seaport straight away without going to vietnamse Embassy. Also, there is on physical or paper stamp required on your passport. This electronic process also known as eVisa or Electronic Visa for Vietnam is available to 80 countries. If you are from one of these lucky countries, you can skip the queue to apply on Online Portal for Vietnam Visa. You can take the photo from your mobile phone and email us if you cannot upload. You will need to carry original passport to the airport so that the immigration officers at the airport can stamp your passport page for entry into Vietnam. Also, your passport must be valid for 180 days on the date of your entry into Vietnam. The following countries are eligible for Vietnam Online Visa aka eVisa Vietnam, Belgium, Netherlands, India, Nauru, Portugal, Croatia, Russia, Spain, Solomon Islands, Qatar, Germany, Liechtenstein, Argentina, Poland, Greece, Australia, Brunei, United States, Denmark, Romania, Brazil, Malta, Bulgaria, Finland, Iceland, Azerbaijan, Philippines, Saint Lucia, Ireland, Mexico, Peru, Slovakia, Venezuela, Norway, Georgia, Mongolia, Estonia, Slovenia, Lithuania, Colombia, Papua New Guinea, Serbia, Kazakhstan, Uruguay, United Arab Emirates, Sweden, Korea, Armenia, Fiji, Montenegro, Switzerland, Andorra, Cuba, Latvia, Cambodia, Monaco, Canada, New Zealand, Italy, France, Luxembourg, Marshall Islands, Vanuatu, Cyprus, Macedonia, Hungary, Czech Republic, Japan, San Marino, Bosnia and Herzegovina, Moldova, Belarus, United Kingdom, Panama, Austria, Montserrat, Micronesia, Chile. 

#å vietnam turistvisum #vietnam forretningsvisum #vietnam visum online #vietnam visumsøknad #evisa vietnam #vietnam evisa #haster vietnam visum #prioritert vietnam turistvisum #fast track vietnam visum #forretningsvisum for vietnam #vietnam visum for koreaborgere #vietnam visum for finlandsborgere #vietnamvisum for statsborgere i Storbritannia #vietnamvisum for monaco-borgere

[mataniya]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

IUIC Kansas City Visits Black Archives Museum

Visit our website here 💻👨🏾‍💻🖥

🔴 https://solo.to/unitedinchrist

Subscribe to the page for more

👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾

https://www.facebook.com/1708260952754579/

WATCH, COMMENT, LIKE, SHARE, SUBSCRIBE on all Social Media Platforms!!

Contact Us At:

[phone] ext. 7013

1973 N 63 Dr,

Kansas City, KS 66102

#KANSASCITY #IUIC #TRUTH  #CHOSENPEOPLE #BLACKS #HISPANICS #NATIVEINDIANS

#Youtube #Instagram

[sedeqatatef]

Ws 7013 bedienungsanleitung sony

  WS 7013 BEDIENUNGSANLEITUNG SONY >> DOWNLOAD LINK vk.cc/c7jKeU

  WS 7013 BEDIENUNGSANLEITUNG SONY >> READ ONLINE bit.do/fSmfG

           Das Handbuch ansehen und herunterladen von Sony Ericsson K310i Handys (Seite 6 von 94) (Deutsch). Auch Unterstützung und erhalten Sie das Handbuch per Sony Ericsson W380i GSM 900/1800/1900 Diese Bedienungsanleitung wird ohne Data and Computer Software Clauses in DFARS 252.227-7013(c) (1) (ii) bzw. View and download the Manual of Sony Ericsson w205 Mobile phone (page 1 of 40) (German). Also support or get the manual by email. Bedienungsanleitung RCA S2102. Lesen Sie die RCA S2102 Anleitung gratis oder fragen Sie andere RCA PROGRAM IS PROTECTED BY COPYRIGHT LAWS AND. Bedienungsanleitung für das Gerät La Crosse Technology Wireless Temperature Station WS-7013TWC. Internetdatenbank der Bedienungsanleitungen. Herunterladen: Bedienungsanleitung sony xperia miro images Online 40283 Herunterladen: Ws 7013 bedienungsanleitung target Online Lesen: Ws 7013 Suche Bedienungsanleitung, Anweisungen Buch, Benutzerhandbuch, Treiber, Schaltpläne, SONY SVO-9500MDP Neue Handbücher RENAULT R 7013 Neue Handbücher KV-25 K1D KV-28 WS 3 D KV-28 WS 3 D KV-28 WX 2 D KV-29 C3D KV-29 F2D KV-29 DV-7011 S DV-7011 S DV-7013 S DV-7036 S DVB 9800 DVD 855 DVD-R 610 DVD-R 615Auf Computer herunterladen – Sie können die Anleitung Oreck WS-7013U auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie

https://lenetilog.tumblr.com/post/691793772226494464/mcz-pelletofen-bedienungsanleitung-fernbedienung, https://sedeqatatef.tumblr.com/post/691792638340366336/fujifilm-hs30exr-bedienungsanleitung-deutsch, https://cugexupujo.tumblr.com/post/691793326625652736/igpsport-igs50e-bedienungsanleitung-deutsch, https://sedeqatatef.tumblr.com/post/691793304841551872/applikationshandbuch-leistungshalbleiter-pdf, https://sedeqatatef.tumblr.com/post/691793924650565632/eagle-magna-bedienungsanleitung-w724v.

[successorsdata]

706 E Fernleaf Ave, Pomona, CA 91766 - Assessorsdata.com

706 E Fernleaf Ave, Pomona, CA 91766 – Assessorsdata.com

Discover 706 E Fernleaf Ave, Pomona, CA 91766. The subject property is considered as a “SFR” located in Los Angeles County. As per Assessor’s office data of Los Angeles County, CA, this property has 2 Bedrooms, 1 Baths, 896 sq.ft. of living space. The lot size for this property is 7013 sq.ft. & year built: 1948. For further details on this property please scroll down to the bottom of this page…

View On WordPress

[allandanny]

What even happened during Spring Semester?

This semester was honestly the most intense educational experience we have ever had. We dedicated so much time and mental energy to all of our technical classes, project-based classes, and our outside commitments that towards the end, it felt like we didn’t have any time to even breathe (or sleep very much tbh). There was a pretty clear split though from pre-spring break to post-spring break in terms of work load/things happening in general. If we compare our semester to the timeline of a hurricane, Pre-Spring Break was when the sky began turning gray and clouds began forming. Post-Spring break was when high-speed winds of deadlines and pouring projects began.

Classes Overview (the rest of this post will reference the class numbers):

1) 8.02 – Physics II. This was a very not fun class for us, since we really don’t like physics. It involved weekly psets, and being tied to Sunday office hours. In the end we both passed and are super happy it’s over!

2) ES.7013 – Biology (taken through ESG). This class was better than 8.02 since we took it through ESG, so we got more one-on-one attention from the teacher. That was really nice.

3) ES.333  - Production of Educational Video – The goal of this class was to make, as the name of the class implies, an education video. It was extremely time intensive, but very rewarding. Here are our videos (Allan) (Danny)

4) 2.00b – Toy Design – In teams of 5 (we were on different teams), we had to make a toy! Again, very rewarding and very time intensive, especially towards the end.

Allan’s 5) 21M.601 – Drawing for Designers – This class was a very relaxing and nice life drawing class!

Danny’s 5) 4.520 – Visual Computing – This was a pretty cool and somewhat hard to describe class about rule-based design.

 Events of Pre-Spring Break:

This was us. The first half of a semester usually has a slow start, but the weather made this spring semester’s particularly slow. We had 3 snow days! In terms of work, we had 2 8.02 exams, 2 ES.7013 exams, and our project classes weren’t that intensive, mostly involving lots of planning.  Edit: after reading this, we remembered that we actually did do blog worthy things during this time of the semester! We hosted a knitting workshop in Next House, our dorm, and taught a knitting class through SPARK! (for both, we wore these babies during the whole thing) We also participated in the calling campaign to congratulate pre-frosh, and got some interesting pub .(haha) Also, since one of the snow days was on Pi-Day, we were able to bake all the pies with our friends!

Events of Spring Break 

IT WAS WONDERFUL. We went back to the warmth of Florida, and just soaked in beach water for hours each day. We also met up with high school friends, which was really nice! And we met new high school friends (who will now be college friends!) at a local admitted students gathering! That’s about it :) 

Events of Post-Spring Break

Campus Preview Weekend (CPW)!

This was so incredibly fun! We hosted so many events from art club to rainbow lounge events, went to so many parts of campus, and talked to so many pre-frosh! One of the days, we had events (some hosting, some attending) back to back from 11am-4am.

Some highlights of CPW:

-When we were walking back to next house at 4 am, we saw a friend (who happened to be a senior) walking out of his dorm, and just casually said “hey guys! Good Morning!” We hope we do not turn into that type of senior.

-During the activities fair, which is the time when pre-frosh get a preview of what activities exist on campus, we met one person that one of us (allan) spoke to on the phone in the calling campaign! It was a really fun coincidence!

-Throughout the weekend, we got the comment “Are you guys THE twins?” multiple times. Apparently the pub we mentioned above was posted to the 2021 facebook page. Every time we got this comment we awkwardly laughed, but it was a pretty good conversation starter.

Ring Committee

This is the committee that designs the iconic brass rat for each class. We both applied to be on this committee, and one of us got it (Allan)! This worked out actually because Danny’s fifth class was more time intensive than Allan’s, so this balanced things out. Ring Comm has involved having a couple meetings so far where we discuss and plan many many more things than excepted, including making a logo, website, getting venues, planning events, getting food for those events, planning study breaks, deciding our public image as a committee, and much much more!

The Borderline Project

This was incredibly mega super duper cool and we are super unbelievably happy that this happened and that we were a part of it! Basically this was a project that let essentially anyone who submitted a sketch to paint a 5x8 foot mural in one long expanse of one MIT tunnel. On top of that, 6 of the ~34 murals ended up having augmented reality animations (ours were 2 of the 6!). Something that was also super duper cool was that we basically witnessed the birth of this incredible project and idea! One of the five project leads did the OpenMind::OpenArt project with us, and she was discussing this idea during our weekly meetings in January. So when we got an email from her a couple weeks into the spring semester about this actually starting, we were super stocked! We ended up painting our murals the weekend after CPW in the span of about 12 hours. It was so cool because at that point, very few murals were painted, and since we’d periodically walk through the tunnels, we’d see people painting and making progress and just filling up the wall! We ended up doing the animations for our augmented reality component weeks later with a friend who is more tech savy than us. We did all the frames for the animation, and then we had a 5 hour meeting with our friend where we meticulously timed and complied our animation in Unity! It was time intensive, but so worth it and fun! We’re really happy we had that experience, and are honestly interested in continuing exploring augmented reality/virtual reality now! The opening night of the tunnels was also soooooo great! It happened really close to finals week, so it was a great distraction! It was also really nice because we hadn’t seen many of the artists, since we were all assigned different weeks to paint, so this was a cool chance to meet the people behind the amazing art! The amount of exclamation marks in this paragraph is a pretty clear indication of our level of excitement for this thing that happened! here’s a (partial) group photo! 

Art Club (and specifically fixing its debt)

We started being part of Art Club Exec in the beginning of Spring Semester, but it was pretty chill before spring break. After spring break though, we found out that Art Club was actually put in debt accidentally by the old exec team (basically they took money out of the wrong account), and now it was up to the new exec team to fix it! The process of fixing it involved rasing a third of the money we were in debt by through a bake sale, and then sending some emails back and forth culminating with a very apologetic one that sealed the deal to get Art Club back to a balance of 0. This took the span of many weeks to organize and figure out. Also, the Sunday night that we were baking was an utter mess for many reasons, and we will list them out because we think its pretty funny just how many things went wrong. definitely not our finest baking moment:

1.The drainage in the sinks in the next house kitchen were broken so the water filled up in the sinks.

2.Right before we started baking, a pretty large “Next Iron Chef” contest started, which involved many people running around and using supplies we needed. They also made the sink much grosser than they had to be. So, we’d have to leave the kitchen and go to the bathroom to clean everything, and we are lowkey clean freaks so we made many trips.

3.The hand mixer we were using didn’t mix the flour well enough into the batter, so for about 40 minutes, we had our four hands (they were mega clean, don’t worry!) in the batter bowl taking the flour clumps out.

4.After the first batch of mini muffins came out of the oven, the ones in the metal tray were stuck so we had to cut them out with a knife. After that we decided not to use that tray anymore, so it took about 5 or 6 more batches to finish baking everything. We were in that kitchen until 2 freaking am.

ESG Yearbook

ESG, or experimental study group, is a fancy name for a community of 50 freshman who spend there time eating, bonding, talking, pseting, taking GIRs in smaller class sizes (of 4-12 students),  and being awesome on the 6th floor of the very hard to find (due to construction of the new nano building) building 24.  We innocently volunteered during fall semester to be in charge of making this year’s yearbook, not realizing that the majority of the work would get done 3 weeks before the deadline and during the super duper busy time of post-spring break. Nevertheless, it was mostly fun to make it! We used shutterfly though, which at times could be frustrating. And when we say “at times,” we mean specifically that shutterfly doesn’t allow you to change a style without ruining all the layout you already completed. So, basically after finishing the entire yearbook unknowingly with a style that would cost people an extra $6 (our fault for not checking this), we had to change the style, and thereby have to start from scratch. So essentially we made 2 yearbooks. In the end, we actually liked how the cheaper one looked more...go figure! This is one of our favorite pages:

Art Scholars

This is a program that brings together graduate and undergraduate students who have a passion for the arts! We get to go on outings throughout the year and get to know awesome people! We applied this semester and we got it! During the interview, the person who runs the program said “this year there were 16 applicants and 16 openings.” It was very cool haha.

FAP Counselors

We applied to be Freshman Art Program Counselors! And we got it! This is especially exciting because due to scheduling issues, we were unable to actually participate in this program as frosh, but now we get to experience it by being counselors! We are super stocked to pass on our knowledge of MIT art opportunities to the frosh and generally be mega artsy for a week in august before school starts!

Declaring our Major

This was a very confusing for us. The majors we were considering were 2 (MechE), 4(Architecture), 6-3(Computer Science) and CMS(Comparative Media Studies). The way we were making sense of these majors was that if we choose that we want to make physical things that look good (as in products mostly and abstract sculpture/conceptual design), then we would choose to combine 2 and 4 in some way or another. And if we choose that we want to critically study and make digital media (including exploring VR/AR more and just generally understanding computers better) then we would combine CMS and 6-3 somehow. Through many discussions, we discovered a major that would allow us to combine 2 majors, which is super convineint because both options involved us doing that! So, this major is called 21E (humanities and engineering). It allows students to choose a humanities field and an engineering field and then mesh them together. After much consideration of what we found fun this semester (which was really difficult, because we found many things fun), we both decided that we each wanted to go with 21E, doing CMS for our humanities and 6-3 for our engineering. This is honestly still subject to change, but this is the decision that feels most right right now.

Finishing our Videos for ES.333

Video editing is so incredibly time consuming. Finishing this video involved spending multiple nights in the computer room in ESG (since we don’t have FinalCut Pro on our laptops) until 1-2 am. This was a very sad existence when we were still in that room when all we wanted to do was sleep, but in the end it was worth it!

 Finishing our 2.00b projects

If we thought finishing our video project was hard, this was harder by 10 fold. It is incredibly good that ES.333 finished before the final crunch for 2.00b started because we wouldn’t have been able to do both at the same time. For 2.00b, each of the last four days before playsentations involved literally staying in the lab from 11am-5pm and then spending extra hours in our dorm (until 11pm-1am) just working to get our toys finished. Then the day of playsentations (Allan’s starts 1:21:00, Danny’s starts 2:03:00), we had to rehearse all day for our skit. Somehow, both of our awkward totally non-actor selves ended up in the skits for our teams. But in the end, many people said we were pretty good! Yay! Despite this, many things actually went wrong right before/during the presentations. For Allan, water guns started leaking 30 seconds before going on stage so extremely fast duck taping was implemented, and for Danny, water was sprayed when it wasn’t supposed to be sprayed so improvising was implemented. (somehow both our teams made water-related toys…the twin is strong within us) 

Buying tickets to Natasha, Piere, and The Great Comet of 1812!

We bought tickets to see our current favorite musical on broadway. We are going to see it with a friend at the end of August right before going back to campus and we are sooooo incredibly excited!

Sense 8

After our last final, we went back to our room and spent 10 hours watching 10 episodes of this freaking masterpiece of a show. If you have free time this summer, and you want to be blown away by mesmerizing visuals, an incredibly cool concept that also translates to a beautiful metaphor, awesome action pact scenes, badassary redefined, ships you cant help but ship, amazing representation, and absolute authenticity, please watch this show!

ending thoughts

Now we are in Florida, mostly recovering from a super hectic and busy semester. We are really happy with what we accomplished during our freshman year, and are looking towards next year, but right now its great to just float in hot sea water and do absolutely nothing else.

#spring #school #writing #baking

[jubaer01]

FOR NORWEGIAN CITIZENS - NEW ZEALAND New Zealand Government ETA Visa - NZeTA Visitor Visa Online Application

New Zealand Visa Online - Offisiell regjering i New Zealand Visa - NZETA

Address : Schultzgt. 1 , N-7013 Trondheim , Norway

Phone : [phone]

Email : [email protected]

Website : https://www.newzealand-visa.org/no/visa/ 

Business Hours : 24/7/365

Owner / Official Contact Name: Nadine Marshall Harper

Description : The Electronic Travel Authority for New Zealand NZETA er en elektronisk reiseautorisasjon for innbyggere i land med visumfritak. NZeTA sent ble etablert i år 2019. Dette visumet fungerer akkurat som et innreisevisum. NZeTA eller visumfritak er obligatorisk for alle innkommende reisende som kommer inn i New Zealand: Innbyggere i hvert av de 60 landene med visumfritak kan komme med flyreise. Innbyggere fra 191 land kan komme med cruiseskip. Electronic Travel Authority New Zealand er så enkelt at du kan fullføre det helt på internett, og motta eVisa på e-post. NZETA tillater kvalifiserte borgere å krysse grensen til New Zealand for turisme, forretnings- eller reiseformål uten å gå gjennom problemet med å stå i køen eller vente på at passet skal stemples. Det kreves ingen porto eller bud til noen offentlige kontorer for å få New Zealand ETA. Det er for tiden et obligatorisk krav for visumfritaksborgere, så vel som cruiseskipreisende i alle land. Selv de fastboende i Australia er pålagt NZ ETA. Kvalifiserte borgere kan søke gjennom den enkle New Zealand Electronic Travel Authority-applikasjonen på nettet for turisme, forretningsbesøk eller transitt til et annet land fra Auckland International Airport. Søkere forventes å fylle ut New Zealand Electronic Travel Authority søknadsskjema med individuelle og identifikasjonsdetaljer. New Zealand Visa har følgende krav, sørg for at passet har en blank side slik at immigrasjonspersonalet kan stemple det på flyplassen. Passet ditt skal også være gyldig i 6 måneder ved innreise i New Zealand. Følgende statsborgere er kvalifisert til å søke om New Zealand Visa Online eller NZeTA, Luxembourg, Frankrike, Kypros, Spania, Portugal, Irland, Polen, Sverige, Ungarn, Østerrike, Bulgaria, Danmark, Malta, Slovenia, Slovakia, Latvia, Nederland, Tsjekkia , Tyskland, Hellas, Estland, Romania, Italia, Belgia, Kroatia, Storbritannia, Finland og Litauen.  The Electronic Travel Authority for New Zealand NZETA is an electronic travel authorisation for residents of visa waiver countries. The NZeTA sent was established in the year 2019, this Visa works exactly like an entry visa. The NZeTA or visa waiver is mandatory for the all inbound travellers entering New Zealand: Residents of each of the 60 visa waiver countries can come by Airplane tourt. Citizens of 191 countries can come by cruise ship. Electronic Travel Authority New Zealand is so simple that you can complete it entirely on the internet, and receive eVisa by email. NZETA permits qualified citizens  to cross the border of New Zealand for the tourism, business, or travel purposes without going through the problem of standing in the queue or waiting for the passport to be stamped. No postage or courier to any government office is required to obtain New Zealand ETA. It is presently a mandatory requirement for visa waiver national, as well as cruise ship travelers of all countries. Even the Permanent Residents of Australia are required the NZ ETA. Qualified citizens can apply through the straightforward New Zealand Electronic Travel Authority application on the web for tourism, business visit or transit to another country from Auckland International Airport. Applicants  are expected to fill in the New Zealand Electronic Travel Authority application form with individual and identification details. New Zealand Visa  has the following requirements, ensure passport has blank page so that immigration staff can stamp it on the airport.  Also, your passport should be valid for 6 months at the time of entry in New Zealand. The following citizens are eligible to apply for New Zealand Visa Online or NZeTA, Luxembourg, France, Cyprus, Spain, Portugal, Ireland, Poland, Sweden, Hungary, Austria, Bulgaria, Denmark, Malta, Slovenia, Slovakia, Latvia, Netherlands, Czech, Germany, Greece, Estonia, Romania, Italy, Belgium, Croatia, United Kingdom, Finland and Lithuania citizens.

#eta nz #nzeta #nz eta #New Zealand visum #visum for New Zealand #evisa New Zealand #New Zealand evisa #New Zealand visum online #New Zealand visumsøknad #New Zealand visum online søknad #New Zealand Visa for amerikanske statsborgere #New Zealand Zealand-visum for Island-borgere #New Zealand-visum for Liechtenstein-borgere #New Zealand-visum for Brasil-borgere #New Zealand-visum for Saudi-Arabia-borgere #New Zealand-visum for Sør-Korea-borgere

[mataniya]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

IUIC Kansas City Visits Black Archives Museum

Visit our website here 💻👨🏾‍💻🖥

🔴 https://solo.to/unitedinchrist

Subscribe to the page for more

👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾

https://www.facebook.com/1708260952754579/

WATCH, COMMENT, LIKE, SHARE, SUBSCRIBE on all Social Media Platforms!!

Contact Us At:

[phone] ext. 7013

1973 N 63 Dr,

Kansas City, KS 66102

#KANSASCITY #IUIC #TRUTH  #CHOSENPEOPLE #BLACKS #HISPANICS #NATIVEINDIANS

#Youtube #Instagram

[islandfox106]

M Audio Driver

M Audio Driver Mobile Pre

M Audio Drivers'

M Audio Driver 2x2

M Audio Driver 64

Support Driver Downloads

M-Audio has made it easy to use the M-Track and M-Track Plus by making them class-compliant, meaning that they are plug-and-play devices. However, M-Audio created an alternate ASIO driver for lower latency and added support. This guide walks through the installation and basic setup of the M-Audio low-latency driver.

Download M-AUDIO Mbox Driver v.1.1.10 for Windows 10, Windows 10 64-bit, Windows 8.1, Windows 8.1 64-bit, Windows 8, Windows 8 64-bit, Windows 7, Windows 7 64-bit.

Driver Information

M Audio Driver Mobile Pre

Drivers & Software Updates Search. Do you have the latest drivers for your device? Our engineering team is constantly adding, updating and improving our drivers to ensure optimal performance. Driver: Install M-Audio AIR 192 4 1.0.3.exe: Applies To: AIR 192 4 AIR 192 4 Vocal Studio Pro: Operating Systems: Windows 7 (32-Bit) Windows 7 (32-Bit) SP1. A classic example is M-Audio's Delta Uninstaller, available for download from M-Audio's web site Perhaps unsurprisingly, many manufacturers don't publicise such utilities, but you may find one tucked away somewhere on the orginal CD-ROM bundled with the product, or available as an option if you re-run the original Setup.exe file from the CD-ROM.

M Audio Drivers'

DriverInstall M-Audio AIR 192 4 1.0.3.exeApplies ToAIR 192|4 AIR 192|4 Vocal Studio Pro Operating SystemsWindows 7 (32-Bit) Windows 7 (32-Bit) SP1 Windows 7 (64-Bit) Windows 7 (64-Bit) SP1 Windows 8 (32-Bit) Windows 8 (64-Bit) Windows 8.1 (32-bit) Windows 8.1 (64-bit) Windows 10 (32-bit) Windows 10 (64-bit) Version1.0.3Release Date10/09/2019Release Notes

M Audio Driver 2x2

Terms & Conditions

BY DOWNLOADING OR USING THIS SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT, THAT YOU UNDERSTAND IT, AND THAT YOU AGREE TO BE BOUND BY ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT, PROMPTLY EXIT THIS PAGE WITHOUT DOWNLOADING THE SOFTWARE.1.Grant of License (WHAT YOU MAY DO):Midiman, Inc. and M-Audio ('Licensor') hereby grants to you a non-exclusive license to use the program and/or program update with which this license is distributed (the 'Software'), including any documentation files accompanying the Software (the 'Documentation') on a single server (if the Software is server based) or personal Computer or Mac (if the Software is PC or Mac based) to support one user, and to make one (1) backup copy of the Software, provided that (i) the Software is installed on only one (1) server or PC or Mac, as the case may be; (ii) the Software is NOT modified; (iii) all copyright notices are maintained on the Software; and (iv) you agree to be bound by the terms of this license agreement. You may transfer the Software to other computers you own so long as you only use the Software on one computer at a time. The Software and Documentation shall be used only by you and your employees, and only for your own personal use or your internal business use, and shall not be used in the operation of a service bureau or for the benefit of any other person or entity without the prior written permission of Midiman, Inc. or M-Audio.2.Copyright Remains in Midiman, Inc/M-Audio; No Transfer of Ownership:This is a license only. No ownership interest in the Software or Documentation is transferred hereby, which ownership shall remain in Licensor. Any use of the Software by any person, business, proprietorship, corporation, company, government entity or agency or any other entity not in strict conformance and compliance with the terms and conditions of this license agreement is strictly forbidden and shall constitute a violation of this license agreement and applicable copyright law throughout the world. It is acknowledged and agreed that the Software and Documentation licensed herein is covered by the Copyright Law of the United States of America, and by the Treaties of Berne, Buenos Aires and the UCC and all related and subsequent conventions and treaties, all rights not specifically granted herein being reserved to Licensor.3.Restrictions (WHAT YOU MAY NOT DO):You may NOT publish, display, disclose, rent, lease, modify, loan, distribute, or create derivative works based on the Software or any part thereof. You may NOT reverse engineer, develop, decompile, translate, adapt or dissemble the Software, not shall you attempt to create the source code from the object code of the Software. You may not transmit the Software over any network or between any devices. In addition, this license agreement is made subject to any and all law, regulations, governmental orders and/or other restrictions regarding export from the United States of America of software and/or information about software. You shall NOT EXPORT Software or Documentation without the prior written consent of Licensor and then only in full compliance with all such law, regulations, orders and other restrictions.4.No Warranty and Limitations on Liability:a. In order to provide you with this free service, Licensor is unable to offer or provide any warranty or make any representation about any benefit or opportunity which you may obtain from Software or Documentation. Should the Software not perform in accordance with any expectation you may have, your exclusive remedy, and Licensor's sole obligation under this warranty shall be, at Licensor's sole discretion, correction of the defect or, in the case of purchase of the product with which Software is operated, refund of the purchase price paid for such product. Any use by you of the Software is at your risk. This limited warranty is the only warranty provided by Licensor regarding the Software and, except for this limited warranty, the Software and the Documentation is provided 'AS IS.' To the maximum extent provided by law (some jurisdictions do not allow waiver or exclusion of implied warranties), Licensor disclaims all other warranties of any and all kinds, either expressed or implied, including without limitation, implied warranties of merchantability and fitness for particular purposes. Licensor does not warrant that the functions contained in the Software will meet any requirements or needs you may have, or that the Software will operate error free, or in an uninterrupted manner, or that any defects or errors in the Software will be corrected, or that the Software is compatible with any particular platform.B IN ORDER TO PROVIDE YOU WITH THIS FREE SERVICE, LICENSOR IS UNABLE TO ACCEPT ANY LIABILITY FOR ANY CONDUCT, ACTS, OMISSION OR DEFECT OCCURRING WITH RESPECT TO OR IN SOFTWARE OR DOCUMENTATION. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU OR ANY PERSON FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INDIRECT, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF BUSINESS INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE OR ANY PROGRAM USING SOFTWARE, NOR WILL LICENSOR BE LIABLE FOR ANY CLAIM BY ANY OTHER, THIRD PARTY, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LICENSOR'S LIABILITY WITH REGARD TO LICENSOR'S OBLIGATIONS UNDER THIS LICENSE AGREEMENT OR OTHERWISE WITH RESPECT TO THE SOFTWARE AND DOCUMENTATTION SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT WITH WHICH THE SOFTWARE IS TO BE USED (IN THE CASE OF INITIAL PURCHASE) OR THE FEE, IF ANY, PAID WITH RESPECT TO THE DOWNLOAD OF UPDATE. SOME JURISDICTIONS MAY NOT ALLOW WAIVER, LIMITATION OR EXCLUSION OF LIABILITY FOR CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.5.Government Restrictions:This Software, including Documentation, is provided with RESTRICTED RIGHTS. Use, duplication or disclosure by any Government or Governmental agency is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in Technical Data and Computer Software clause of DFARS 252.227-7013 or subparagraph (c), (1) and (2) of the Commercial Computer Software-Restricted Rights clause of 48 CFR 52.227-19, as amended, or any successor or substantially similar or comparable regulations and/or restrictions .6.Termination:This license agreement is effective upon acceptance by clicking the 'I AGREE' or like choice below, and remains effective until terminated. You may terminate this license agreement at any time by destroying or returning to Licensor all copies of the Software and Documentation in you possession, custody or control. Licensor may terminated this license agreement if Licensor determines that you have violated, failed to observe and/or breached any of terms or conditions of this license agreement. Upon notification by Licensor of any such termination, you agree to destroy or return to Licensor all copies of Software and Documentation, in whatever form Software and Documentation exists in the possession, custody or control of Licensee, i.e. you, and you agree, if so requested by Licensor, to certify in writing that all copies, including backup copies, and including any originals, have been destroyed. All provisions relating to confidentiality, proprietary rights, trade secrets and non-disclosure shall survive any termination of this license agreement.7. Miscellaneous:This license agreement shall be construed , interpreted and governed by the laws of the State of California without regard to its conflict of laws rules and law pertaining thereto. Any civil action, lawsuit and/or arbitration resolution shall be conducted only in the County of Los Angeles, State of California, and you agree to submit yourself to the jurisdiction thereof for purposes of such action, suit or resolution. This license agreement constitutes the sole and entire agreement between the parties hereto, and any modification of the terms and/or conditions shall only be effective if in writing and signed by the parties hereto. If any part of this license agreement if found or determined to be invalid or otherwise unenforceable by a court of competent jurisdiction, the remainder of this license agreement shall be interpreted and enforced to the extent possible to achieve substantially the effect of this license agreement as set forth herein.

By downloading this software you have read and agree to the terms and conditions stated above.

M Audio Driver 64

[hunterpeak661]

Velleman Instruments USB Devices Driver Download

Below are the Windows device drivers for the ELITE USB hardware as well as the Wibu key. Windows Device Driver. Windows XP, Windows Vista, Windows 7. Most USB audio and MIDI computer peripherals are Class Compliant USB devices. This means that to communicate with the computer, they use drivers that are built right into the host computer’s operating system. These drivers are written by Microsoft (or Apple for Macintoshes), and come pre-installed on all computers. Follow this link to National Instrument's page for LabVIEW Plug and Play drivers: NI X-Stream LabVIEW Drivers. NI has developed a 'traditional' driver as well as a 'project-style' driver for use in LabVIEW 8.0 and above. Installation instructions can be found in an HTML readme file that is within the ZIP file containing the driver download. Velleman Kits K 8-CHANNEL USB RELAY CARD – Velleman – Wholesaler and developer of electronics. Image is for illustrative purposes only. I have a Velleman k Relay Board from which I am trying to read some data. Unfortunately re-reeling is not available at the present time for this item. Send to a friend. Close Your message has been sent. The EAD10 acoustic electronic drum module instantly transforms your acoustic drum kit into a powerful, digital/electric hybrid with sampled sounds and studio-quality digital effects. It allows you to play along with your favorite artists and record and share the audio and video directly to social media. The EAD10 enhances every aspect of your drumming and makes your acoustic drums do more.

The terms of the software license agreement included with any software you download will control your use of the software.

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the 'Software') until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the 'Site License' below shall

apply to you.

- If you are an end user, the 'Single User License' shall apply to you.

- If you are an original equipment manufacturer (OEM), the 'OEM License'

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a 'break-the-

seal' license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

Velleman Instruments Usb Devices Driver Downloads

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

Velleman Instruments USB Devices Driver Download

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED 'AS IS' WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

Velleman Instruments Usb Devices Driver Download Windows 10

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with 'RESTRICTED

RIGHTS.' Use, duplication, or disclosure by the Government is subject to

Velleman Instruments Usb Devices Driver Download Windows 7

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

Velleman Instruments Usb Devices Driver Download Windows 8.1

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

[giveawayplan]

Toneden Bose Sound Bar Giveaway - Enter To Win A Bose Sound Bar

Toneden Bose Sound Bar Giveaway – Enter To Win A Bose Sound Bar

Toneden Bose Sound Bar Giveaway open for United States, which is going to ends on September 2nd, 2020. So, all active participants should enter fast before the end date. Just submit your entry and get chance to win A Bose Sound Bar.

Giveaway Entry Page Giveaway Rules

How To Enter :

First of all open the Giveaway page.

Read carefully all the official Rules before entering in Giveaway.

Tak…

View On WordPress

[januarydecember]

September October 2020 Calendar Page

September October 2020 Calendar Page

Free print of the September October 2020 Calendar Page through this post. Now download the latest September 2020printable calendar images in multiple designs. We would like to inform you that some other pictures like daily planner, weekly and monthly schedule templates are also shared on this website. You can easily create a planner and manage your household tasks with these templates. Likewise,…

View On WordPress

#September October 2020 Calendar #September October 2020 Calendar Page