#disturbing cakes | Explore Tumblr Posts and Blogs

muzzleroars · 1 year

Note

hey, just curious. Do you have any thoughts about the most recent secret mission's mention of Lucifer? any ideas as to what they might end up being, if they'll actually appear in game/ be a character or not, etc?

i've talked a little bit about lucifer in a couple different asks, but this is a good place to fully talk about him and get it all in one place!!

this testament is already pretty interesting wrt the timeline and traditional christian thought on the creation and purpose of hell, because the war in heaven typically occurs before the creation of humans. i think this is generally accepted due to needing satan to play the role of the serpent in the garden - if lucifer still remains in heaven, then how does humanity fall? how do they come to deserve hell without their temptation? assuming the garden of eden will be included in the lore, the only answer we have is that the temptation was a test from god himself and humanity failed, leading him to develop hell specifically for his experiment. this tracks when looking back on the previous testaments, as god curses himself for failing to create a being without free will, one that will listen to him absolutely - he sent the temptation and humans went against his express orders by their consumption of the fruit. and so he makes hell. in his anger, both at humanity's failure and his own, he creates a place of pure malice meant only to eternally punish any that act in defiance to him, no matter the cause or how small the infraction.

however, lucifer questions this action and is even bold enough to ask god directly why. and this is likely what causes god to truly break down into crisis due to several factors: he does feel guilt over creating lives only to damn immortal souls to unending torture, but there is also the fact that, for whatever reason, he can't take it back. he's lost control of hell and it consumes these souls now even as he realizes the horror of what he's enacted, and so he must not be all-powerful. additionally, by lucifer asking this, it makes it clear that angels also have free will, that they form opinions separate from god's and can see him as flawed. lucifer's question may have been innocent, he may have believed god had a perfectly good answer, but he showed autonomy by asking, and any misstep on god's part may see lucifer understand that his creator is not as infallible as the heavenly host believes. so he is expelled, immediately thrown from heaven into hell himself, and what can god do but sink into that despair? his brightest angel gone, the creation made in his image damned, everything he has made is failing. his kingdom is a lie, his competence is a lie, and he just surrounds himself with angels still unquestioning and human souls utterly obedient. he turns his eyes away from the festering, growing failure that is hell. he turns everyone's eyes from it. curse it, hide it, make it taboo. but it's still there. and so is lucifer.

SO on to lucifer specifically - i'm really not entirely sure what might be done with him and i have several ideas about his current state. what's most difficult is that we have no confirmation of fallen angels and how they might appear in this story should they exist. all the demons are described as beings made of hell mass placed into a shell and appear stone-like - it's likely that they are hell turning the inanimate animate, almost in mock creation with their humanoid shapes and faces. but these aren't former angels and are instead "native" beings to hell, so it's impossible to say what form lucifer would take with any certainty. but if i can wildly speculate and since we all KNOW i love a good fallen angel, i like the idea that he may have died upon his fall but that obviously didn't exactly stick. i sort of just in general feel that an angel falling necessarily means their death, but, if powerful enough, they have their own similarities to prime souls in that they will become something else - and yea i definitely like the thought of whatever lucifer's become is something fused with hell. i like him being fixed as dante's lucifer and perhaps similarly mindless in a sense; he is not his own but a twisted entity warped in agony and emblematic of what a horrific place hell truly is. i don't think he'd be the final boss entirely because it's too obvious, but i'm likely way off base for whatever's actually planned anyway lol mostly i do just really like the idea that lucifer may show us what happens to an angel when they die and will truly showcase what awful creations god had made.

#also god definitely lied about what happened with him to the rest of heaven lol #and i very much like the idea of gabriel finally actually seeing what became of him #the truth so disturbing but so affirming of his own choices #like it's all been fucked up from the beginning huh #can everyone tell i just really want fallen angels to exist wahh #cake answers

26 notes · View notes

frozenhi-chews · 3 months

Text

I'm so sick and tired of seeing AI covers oh my gosh. Get that out of my face PLEASE

#theres something so viscerally WRONG about seeing AI covers #thats not the og voice actors or people singing #thats a mockery of their voice that they probably said “no” to #like. okay unless they gave the go ahead for AI covers im just. no #its weirdly uncomfortable and disturbing #idk why but it is #the cake doth speak

3 notes · View notes

sonic-adventure-3 · 1 year

Text

i am going to draw a cake. i am going to design it. it will be plausible to make in real life. it will look delicious and beautiful. i hate cake

#rambles #the amount of cake and dessert videos i’ve watched in my lifetime is disturbing #this is gonna be some chocolate guy level shit #no fucking fondant fuck fondant #i should learn how to 3d model #YES THIS IS SONIC RELATED. YOULL SEE. just give me like 1-6 business days

11 notes · View notes

protokirby · 1 year

Text

Totally insane dream I had

I was with Hop from pokemon. I was Grusha, also from pokemon.(I'm not always myself in my dreams. That's fun.) We were hanging out after we met and became friends. Leon was nearby, of course. Hop took me somewhere and we both jump off a high place to our deaths. Except it was a high dive in a water park. Neither of us expected it would be deadly. We thought "certainly, they height-tested the thing to be safe." but nope. On the way down, I realized we weren't going to make it and I hugged him tightly. Then we both "woke up" in a beautiful place made of marble. Angels and stuff were around and we were facing judgement. Hop got to enter Heaven while I was told I couldn't go in yet and I "woke up" in the middle of the ocean. Definitely not in the water park anymore. It was dark like a night with no moon and a whole lot of hands were trying to pull me under water saying "come play with us" or some spooky stuff like that. I don't remember exactly. I just remember it was annoying to move past them as I was trying to swim to some nearby small island that spontaneously appeared. The water was so deep and the waves were mildly rough. Only my face was able to be above the water and I was struggling to stay afloat. Finally got to the island and some music from the original gen 3 pokemon ruby/sapphire/emerald began playing. I think it was the theme from Sootopolis but I don't remember. But I soon woke up for real. Bunch of tape was peeling off my wall. The big bunch of tape I had covering a hole. Nothing supernatural probably. Must have been thrashing in my sleep lol? But being awake led me to realize Leon in the dream wasn't in the direct area of the high dive of doom and didn't see the death happen. But I, (as Grusha) was in the ocean so I couldn't go explain to Leon what happened. Heck, I don't even know if the ocean was in the same "world" anymore. But what would I have even said to Leon?? "Sorry, Leon. Your brother went upstairs and I am a sinner unworthy of paradise until I get my act together."?! But man the thing with the spooky hands in the ocean felt so real. Like I was actually being grabbed irl. A part of me is tempted to base something in a horror/angst fic off that experience.

#nightmare #what the heck #what was i on #don't go to bed right after eating cheese i guess #i dream about death a lot but this takes the cake of being the first to give intense emotional disturbance #i am so done

1 note · View note

isa-renee · 3 months

Text

so i got a sweatshirt in a color i have lovingly named “puke green” and thus far the closest color match is a tie between the vaguely disturbing “vegetable mash” at dinner tonight and my post-wisdom-teeth-removal bruises alfkkgkg

#but like it’s literally such a weirdly flattering color on me?? i am confusion????#and yes the relatively recent lack of wisdom teeth is in fact why i opted for the vaguely disturbing vegetable mash #but hey tonight is also the night of violently pink artificial strawberry flavor cake (affectionate)#so like there are upsides as well

1 note · View note

gaythreadrunner · 5 months

Text

so you're taking care of your computer's software health. NICE! but what about its physical health?

because yes, computers do need the occasional real-world checkup to make sure that they're running well. but what exactly does that entail? i see many posts about maintaining software health: limit your browser tabs, ensure your antiviruses are working properly, so on and so forth, but checking the physical components is something i sparsely see discussed here.

so what's the deal with physical maintenance? well, have you ever had your computer hack and wheeze trying to keep up even if your OS and all your drivers are up to date and functioning? if you've never opened up your computer before, you may be shocked to find just how FILTHY it can get in there:

take a closer look at that snout dust! PTOOEY .. BLECKH

computers are much more likely to accumulate internal dust if they're sitting on the floor, and especially if they're near any vents and/or if you have pets.

ok, you've figured out how to open your device and now you're staring at the second coming of the dust bowl in your gaming rig. what now? let's explore some basic cleaning tips, deep cleaning pointers for your CPU/GPU, and tips to help keep maintain your computer's physical health in the future.

first of all, turn off your computer and unplug it (for my computer, i turn it off, turn off the PSU switch, unplug it, and then press the power button for about 30 seconds to drain the capacitors and minimize static risk)

generally, you're gonna want to have THESE items:

some sort of face mask (dust masks are best, but anything that'll help keep the harmful dust out of your lungs will generally work)

a can of compressed air (or an electric duster if you're ~fancy~. they look and function like turbo blowdryers)

a vacuum will be useful if there's a LOT of dust, best to use in combination with an anti-static cleaning kit

if you ARE gonna use a vacuum, spray every attachment you use with an anti-static spray. disturbing large amounts of dust creates a lot of static, and electronics are very sensitive to that.

it's never a bad idea to grab an grounding wristband as well, but as long as you wear loose clothes and always keep some part of your skin in contact with the case, you should be ok. (i don't know how much this applies to laptops and smaller devices, since the cases for those are typically plastic)

if there's staining (like from smoke) or there's more gunk caked on than you thought, you can gently clean electronic components with a brush/paper towel/microfiber and medical-grade isopropyl alcohol ONLY. do not use any other cleaning alcohols for this task.

before you do anything, TAKE THAT FUCKER OUTSIDE! always clean a dusty device where the wind can carry that shit away, because oh my GOD will it fuck up your lungs like crazy. (that, and compressed air cans have fluorocarbons in them, which isn't great to breathe in either)

most of the time, you'll probably be fine just using an air duster. for compressed air cans, spray the dirty surfaces in short bursts. an electric duster can be constantly blown. when dusting fans, make sure that you're holding the blades still as to not accidentally make them spin too fast (ESPECIALLY with an electric duster!), since that can damage the mechanism that makes them spin.

however, if there's a lot of dust, it may be better to give it a vacuuming first. anything from a handheld to a shop vac will work, and attachments with brushes on the end will help tons with loosening up even more dust. and of course ALWAYS make sure that you're spraying any attachments with anti-static spray, and keep a hand on the case of the computer to electrically ground yourself since the hose will be in contact with the internals.

if there's any left over, give it a blast with the duster.

in some rare cases, there may be some extra gunk caked onto the internals, and you may have to really get your hands in there or take components out individually. if you don't have an anti static wristband (the ones with an alligator clip) do your best to ALWAYS keep your skin in contact with the case as you're finagling around in there.

it's probably a good idea to have disposable gloves on for this. grab your isopropyl and towel of choice (microfiber is ideal, but dirtier PCs may need disposable paper/shop towels), soak it a little bit, and gently scrub off the gunk n' grime as needed.

with heat sinks specifically, since they're just big blocks of metal, they're the one part of a component that can be cleaned under water. if a dusting doesn't suffice, gently scrub it with a brush under warm, soapy water, rinse thoroughly, and let it dry on a towel for a few hours before reassembling it into the electronic components.

if there's still little bits stuck in the radiator fins, stick an isopropyl-soaked q-tip in there to push it out.

the dust settles, everything's put back together, and it's all clean in there again. YAY!!!!! but what if you're still experiencing temperature problems? well, it typically comes down to either the CPU or GPU:

IF ITS THE CPU: if you took off the cooler to clean it, then i hope you remembered to dab some fresh thermal paste on there. you should be replacing thermal paste few years, otherwise it dries out and loses its effectiveness.

the type you use makes a huge difference too; i like to use arctic's mx-4, it has excellent thermal conductivity while still being an electrical insulator, so spillover isn't a problem. if you go for a liquid metal compound, please do your research first, since some of them can run the risk of corroding the cooler pipes and/or the CPU's outer casing.

to replace thermal paste, make sure that the crusty old paste is sufficiently scrubbed off the contact points of both the CPU and cooler. again, use isopropyl for this. once it's all cleaned off, put about a pea-sized amount of paste on the CPU and carefully lower the cooler onto the mounting bracket before fastening it in place. (also it really doesn't matter how you put the paste on, as long as it ends up covering most of the contact area)

also if you're still using the cooler your CPU came with, you should probably get a better cooler. especially if you're doing gaming or using graphically/mathematically intensive software. sorry. the stock coolers that most CPUs come with are mid as hell. you can get a nice ARGB one for less than 20 USD i promise its worth it

IF ITS THE GPU: like CPUs, your graphics card also needs to have its thermal paste cleaned out and replaced every so often. but they also utilize a second thermal material called thermal pads. these are usually made of either silica gel or a very thick clay-like grease, and come in different thicknesses. my favoured pads are owltree's 12.8w grease pads, the assorted pack comes with enough for about 4-5 GPUs.

taking apart a GPU seems scary, and understandably so; they're incredibly expensive and hard-working pieces of technology! but i've done it twice now, and it's actually surprisingly simple (as long as you keep track of all the damn screws... im lucky there's a magnetized screw mat in the house i can use)

i recommend watching a deep clean/teardown video of the GPU model you have before digging into it yourself. generally, they separate into 4 distinct portions: the outer shell, the heatsink, the board, and the backplate.

the shell contains the fans and any possible RGB elements. it'll have 1-2 controllers plugged into the board, one for the fans and one for the lighting elements if there are any. once the case is unscrewed, unplug these connectors with a firm squeeze and tug.

these tend to be surprisingly dusty on the inside, so it's probably a good idea to blast it with a duster. again, make sure to hold the fans so they don't overspin. you can also remove the fans from the shell and clean them individually if you'd like.

the heatsink is BIG and heavy, and you can do all the same stuff here that you would with a CPU cooler heatsink. it may take a bit of effort to tug off if the thermal materials are really making it stick to the board. once it's off, scrub the old thermal paste, blast it with a duster, and wash under soapy water if needed before rinsing thoroughly and leaving it to dry for a while.

the backplate is just a flat piece of metal that protects the back side of the board. usually all this will need is a simple wipedown.

the board is where all the magic happens, and will usually have a layout that's something like this:

clean up as needed; gently scrub off old thermal paste, scrape off the old thermal pads (but take close note of how thick they are so you can replace them with the correct pads), and brush/wipe down the dust and grease on each side as needed. take care to avoid touching the PCIe connector too much (the bar of golden pins that juts out from the bottom)

thermal padding varies from card to card (i recommend checking thermal pad placements for your gpu in water cooling guides, even if you're not doing water cooling) but it's typically gonna be on THESE spots:

the VRAM chips surrounding the die (main chip) along with the small black chips next to the capacitors will require thermal pads the most. cut each one to size, carefully peel off the plastic films, and press each piece onto the chips.

now you can grab your thermal paste and put some on that big shiny die. now take your freshly pasted/padded board and CAREFULLY lower it back onto the heatsink. i highly suggest having a good source of lightning for this, since shifting around the pieces too much trying to get them to align properly can displace the thermal pads and mess with how the paste spreads.

screw the heatsink tight to the board, and double check to make sure that the pads and paste are snug against the heat sink. now put the backplate and shell back on and BAM YOU'RE DONE! with the paste and pads i used, i was able to bring down the temperature of my cards by a good 10-15 °C.

ok you've done all this deep cleaning shit and your computer is happy and healthy. what can you do for your computer's health in the future?

DUST AT LEAST ONCE A YEAR. haul that thang outside and spray that shit out to stop it from building up for too long.

KEEP IT OFF THE FLOOR. if you can, of course, not everyone has the desk room for it. computers accumulate dust easier when they're close to the floor. if you do need to keep it on the floor, you might have to dust it every 6-8 months rather than once a year.

AND STOP PUTTING YOUR LAPTOPS ON SOFT SURFACES I SWEAR TO GOD

GET A FAN CONTROLLER. motherboards are DOGSHIT at maintaining fan speeds!!!! there are physical fan hubs that use controller software, but if you can't afford that, fancontrol by rem0o is a stellar software-only option.

IF YOU DON'T ALREADY HAVE CASE FANS, GET THEM. the number of fans depends on the motherboard form factor your case can accommodate (ATX cases typically have 6-8), but having that air circulation is very important to maintaining ideal temperatures. arctic makes fantastic budget-friendly fans.

IF YOU HAVE AN NVMe HARD DRIVE: please put an aluminum heat sink on that thang. they get toasty :(

OK THATS IT I THINK. if anyone else has tips they wanna add, go right on ahead. ok thank you bye your computer will love you

#sprite.exe

13K notes · View notes