#arrk

[lordsireno]

Fork hours once again. Wondering where I can fit him into my main story

#Deponia OC #Fork #Organon OC #Cletus #Argus #Fork/Argus #Fogus? Arrk?? Akdgah #monkeydraws #500

[jessysapphireblue]

Confrontation Luffy x reader

This is part two. If you want to read part one -----> Here

As in part one, Je as a nickname, the craziness continues, enjoy.

Ever since your boyfriend admitted that you two slept together, you went out of the way from anyone. Usopp eyes followed you around whenever you passed him, as if to DARE you to get closer to Luffy.

"Puah! The food was amazing Sanji", Luffy beamed and patted his belly. "Thanks", the cook said with a sad voice. It took a turn on him as he heard the news this morning, that you his beloved Goddess actually slept with the Captain.

"Je! What are you doing, your plate is still full" "Ah, yes", you admitted, obviously. Taking his fork, he took some food of your plate and held it out with a innocent grin. "Here!"

The kitchen was dead silent. Only the drop of Sanji´s cigarette was heard, all holding their breath. Luffy feeding you. HE! WANTED! TO! FEED! YOU!

Usopp directly began to pray, sweat running down his face. "No Luffy, it´s ok", you admitted and a loud breath was released. "Eh? Don´t you like the food?" "AH! I failed you my Goddess", Sanji fell onto the ground curling himself up as he whimpered.

"No! No no no. I´m not really hungry. You can eat the rest, Lu" "Sure?" "Yes, sure", you admitted and within a blink of your eyes, the plate was clean.

Sun all vanished, the night sky took place. "Good Night", you said and waved to them. "Je! Wait I sleep-", Luffy was interrupted as Usopp grabbed the collar of his shirt. "No! You will come here, we have a lo to discuss", he looked mad at your boyfriend. "But-" "Goodnight, Luffy", you smiled and went into your room and Usopp dragged his best friend over to the boys cabin.

Inside, Usopp began to breathe out, the rest of the boys already there as "Luffy", he started calmly. "Yeah?", he was already sitting on the couch. "One question....HAVE YOU LOST YOUR MIND?!", Usopp began to shout, walking back and forth, " DO YOU HVE ANY IDEA WHAT YOU DID?! DO YOU EVEN KNOW WHAT COULD HAPPEN TO HER?! TO US?! HAVE YOU THOUGHT OF MY BLOOD PRESSURE?!", he screeched so much that his voice broke.

"WE´RE PIRATES. THIS IS THE NEW WORLD!! YOU CAN´T JUST MAKE A BABY ON BOARD!" "Relax. I didn´t put a baby in her" " And that should calm me down?! I CAN`T EVEN-"

"you´re just mad that Luffy had sex before you, long nose", said Zoro with a smirk. "No!", admitted Usopp. "Really? You´re mad because I did it with Je?", Luffy tilted his head. "NO! What I mean is that you-YOU- who never-NEVER! Took an interest in this stuff suddenly know how this all works!"

"Usopp, are you still a virgin?", asked Franky and a blush covered the snipers cheeks. "YOHOHOHOHOHO! Usopp-san" "So basically, you thought you would get laid before Luffy", Sanji blew on his cigarette. "That is NOT the point! It´s Luffy, he doesn´t-"

CRUNSH!

A loud voice went through the cabin and all looked at Luffy who was eating cookies. "Where did you get these from?!", shouted Sanji. "Je makes them for me. She always makes too much and gives me the leftovers. She said when I´m hungry at night I can eat them", he smiled. Usopp inched the bridge of his nose and exhaled. "Did you even pay attention to what I said?"

Luffy shallowed all of the cookies at once before turning to his best friend. "No, not really", he laughed and the next second Usopp flung at him, strangling him. "YOU STUPID RUBBER IDIOT! I´M GIVING HERE A LECTURE AND YOU EAT!!!" "ARRk-Z-Zoro", Luffy chocked out.

Jinbe simply laughed at everything that happened. "Leave Luffy-kun alone. He has finally become a man" "OVER MY DEAD BODY!" "Bone-chop!", said brook and hit Usopp head. "What was that for, Brook?" "Luffy turned blue if you didn´t noticed it", admitted Franky.

"Ok, following!", Usopp clapped his hands. "These who are still virgins, raise their hand", he said and rose his hand, the rest being down. "SANJI?!" "What? I know what I´m doing", he smirked.

Luffy laughed loudly as Usopp fell to his knees, praying. "Oh, God. Forgive my sin for being in this rotten crew!", he began to tear up, "please don´t kill me, I´m still innocent and love my life so please-"

The others ignored Usopp as "Yohohoho, Luffy-san, One question. Is her body as wonderful as it looks?" "OH! Yes, Luffy! We need this information!", Sanji became heart eyes and puffed air through his nose.

"Je? Her skin is soft and smooth, like a pillow! I enjoy hugging her when we do it" "Yohohohoho", blood dripped from their noses. "Luffy, how was even your first time?", asked Zoro. "It was super fun! We laughed and it sorta happened.

"FUN?! YOU IDIOT! She is a living Goddess, the light of this ship and you should worship her fully! Kiss her skin, whisper love confessions, show her how much you want her, make her whine, and leave her breathless", Sanji went on one knee, explaining passionately.

"Just show her who´s in charge", yawned Zoro. "Oi, Marimo! That works with cavemen but a goddess like her!" "And if I hear one more of this sweet as shit, I´m gonna puke in your bed, Hentai-brow"

Both were about to fight. "Why that? We both laughed and felt happy with each other. This is about the two of us so it should be happy for us! But I have to admit, her moaning my name gave me shivers", Luffy grinned.

"Super, Luffy! So manly!", laughed Franky. "Luffy, I will never, ever again see you with innocent eyes!", Usopp whined.

"Ah, you´ll get over it", admitted Jinbe. "How! I have images in my head I never wanted to have! I feel like I was being molested!"

"You overdo", all said and the door opened. "Je!", your boyfriend jumped up when he saw you enter. "shhh. Chopper fell asleep in his office." Luffy looked at the sleeping Chopper, grinning.

"I take him", Zoro came forth and took the reindeer from your arm. "And you guys go to bed soon. Sleep well", you smiled as Luffy took your hand. "Why are you up?" "I´m on watch", you admitted. "Ok! Bye guys", waved your boyfriend and tug you outside with him, closing the door.

"Huargh! No no no. Not again. The pics coming back", Usopp shivered and jumped around. "Stalker" "Hey! If we have a baby here in a few months, I told you so! Luffy does not care"

"Night" "Yo, you also" Yohohoho, night guys"

"LISTEN TO ME!"

#luffy #luffy x oc #luffy x reader #luffy x y/n #monkey d. luffy #one piece #straw hat luffy #anime and manga #straw hat pirates #straw hat crew #chaotic straw hats #roronoa zoro #god usopp #one piece usopp #vinsmoke sanji #black leg sanji #one piece sanji #tony tony chopper #franky one piece #soul king brook #first son of the sea jinbe #one piece jinbe

[arrkglobalcompany]

📦Unlocking Business Opportunities: ARRK’s Comprehensive Services📦

ARRK is a global company offering comprehensive product development services from design, and prototype to production. Our innovative technologies and engineering expertise help our customers deliver the highest quality products to the market.

📈About ARRK: Get the best Product Development Services 📈

ARRK is a global company offering comprehensive product development services from design, and prototype to production. Our innovative technologies and engineering expertise help our customers deliver the highest quality products to the market.

ARRK offers a wide range of services aimed at supporting businesses in bringing their products from conception to market. These services include:

3D PRINTING

Our 3D printing service and additive manufacturing solutions cover any requirement with the help of advanced technology and a variety of high-quality materials, as well as our signature design and engineering expertise. Our capability is a prototype ready for evaluation or production, and the differentiation relies on the various processes we manage.

VACUUM CASTING

Easily reproduce your design with the vacuum casting process by using a 3D printed or machined master to create RTV silicone rubber molds. This is a cost-effective solution with consistent prototypes, be it in small quantities or in the region of hundreds.

CNC MACHINING

Computer Numerical Control (CNC) machining is when software controls machinery to make precision cuts by removing material from a workpiece to create unique parts. Plastic and metal components can be prototyped or produced with our medium or low-volume CNC machining

MICROWAVE MOLDING

Microwave Molding is a quick manufacturing process that works by micro pelletizing a thermoplastic resin to create prototypes. The fine particles are heated and melted in a silicone mold similar to our Vacuum Casting solution. The result is a lot faster and ready for the evaluation process.

By emphasizing their global reach, comprehensive services, innovative technologies, and engineering expertise, you convey a strong message about their commitment to assisting customers in delivering top-tier products. It's concise and highlights ARRK's strengths effectively.

LIGHTING PROTOTYPE

As prototyping experts, we rely on our engineering skills and manufacturing technology to make lighting prototype models that reach high-quality standards and accomplish design guidelines. Optics, electronics, mechanics, and analysis convene to produce excellence.

INJECTION MOLDING

Our high to low-volume injection molding services allow companies to get as many custom parts as needed since this process’s main features are repeatability and competitiveness. Injection molding works by injecting melted plastic into a mold, cooling it afterward, and solidifying it. It’s generally a mass-production solution. If you want to get more information about product development, you can navigate to this website.

DIE CASTING

Die casting is a process that inserts molten metal under high pressure into reusable molds called dies to produce high-quality components for multiple purposes. ARRK can create complex, accurately dimensioned parts with this low-cost and effective solution as a die casting manufacturer.

By emphasizing their global reach, comprehensive services, innovative technologies, and engineering expertise, you convey a strong message about their commitment to assisting customers in delivering top-tier products. It's concise and highlights ARRK's strengths effectively.

💼 Connect with Us Today! 💼

From concept to creation, ARRK is your one-stop destination for comprehensive product development services. Reach out to us via our official channels:

🏢 Business Address: Block E-10-01, Oasis Ara Damansara, Jalan PJU 1A/7, Ara Damansara, Petaling Jaya, Selangor, 47301 Malaysia

📞 Phone: [phone]

🌐 Website: ARRK Official Website

🕘 Hours of Operation: Monday-Friday: 8:30 am-5:30 pm

Social Media: Don't forget to follow us on social media for the latest updates, tips, and success stories:

👍 Facebook: ARRK Business

🔗 LinkedIn: ARRK

🕊️ Twitter: ARRK

Choose ARRK and embark on a journey where innovation meets precision, ensuring your ideas are not just realized, but perfected at every stage of the product development process.

#rapid manufacturing company #rapid prototyping and manufacturing #3d printing prototype service #cnc cutting machine supplier

[444namesplus]

Aal Aalde Aar Aber Abord Aburg Ade Aden Adord Adt Adtim Ahau Ahden Ahna Ahne Ais Ald Alden Alind Alkel Alken All Allin Almun Als Alten Ana And Angen Ann Appen Arn Arrk Arsch Art Arte Arz Asa Asel Auber Aude Auer Aul Aund Aurg Axnōt Bach Bachl Badt Baer Baig Bal Bald Bark Bas Bau Baus Baut Bayen Bechl Beck Bein Ben Ber Berd Berdr Beren Berg Berim Bern Bert Bia Biber Bin Bing Birch Bisen Bitz Bla Bladt Blen Blena Blich Blutz Boch Boden Bof Bord Borda Borf Borg Bort Botna Bow Bra Bram Bre Bren Brich Bruch Brunn Bryn Buken Bur Bureu Burin Burse Burt Bus Böham Bømla Bück Bürg Bürt Bütte Bütz Cal Calch Cald Calda Calde Carch Casse Chem Cla Coben Cock Coe Cord Creim Cren Crino Cusel Dal Dals Dan Dard Den Dena Dieck Diedr Dieim Dien Digyn Din Dinda Dineb Ding Diten Ditz Dord Dorde Dorf Dorn Drud Dust Döben Dömho Dürg Ebel Eberg Eck Edt Eger Egern Egg Eid Eim Eißen Eke Elben Eld Elden Elfin Eln Emdin Emgo Emitz Emme Emsda Ena Erd Erg Erich Ern Ersee Esch Esen Esher Esle Ewal Fach Fal Fel Felm Fen Fil Filde Flana Flau Fleim Flen Fogen Ford Forf Forna Fra Fral Fran Frau Fre Freck Free Freim Freis Fren Frich Fried Frike Frim Frin Frow Fröde Ful Furen Furg Førg Fürg Fürt Gadt Gan Gar Garde Garg Garne Gart Gast Gebut Gel Geld Gen Genau Gend Georn Ger Gerb Gerf Gerg Gerja Gil Gis Gisen Gla Glan Gne Gold Gom Gotte Grach Gran Grd Gre Greha Greim Grich Grick Grim Grims Grin Groda Gron Grow Gríðr Grötz Grøya Grún Grúðr Grüch Grüm Guber Guden Gul Gulau Guld Gun Gunn Göld Gönin Görd Göttn Gößen Günde Güto Gütz Hadt Haer Hagda Hage Hal Halan Halze Hammo Han Hange Har Harf Harn Hau Haurg Haus Hause Haut Hed Heder Hee Heich Heif Heig Heim Hein Heina Heind Heing Heitz Hel Held Hemic Hen Hena Heng Her Herau Herf Herg Herms Hiden Hil Hild Him Hin Hinge Hirch Hja Hjack Hjel Hjørd Hock Hofn Hold Holf Hor Hord Horde Horf Hoth How Hren Hrin Hum Hus Håste Höna Hönia Höð Hück Hünd Hüren Ichau Idow Idt Ilden Ilen Ilin Immel Inne Irco Isfen Istad Itzen Iðr Jal Jalen Jar Jel Jen Jerg Jeve Joh Jord Jorde Jorf Jugne Jul Julz Jun Jup Jör Jørg Jøsse Jüllr Jürg Jüth Kald Kalde Kam Kange Kapa Kapla Kar Kas Kasse Katz Kau Kaurg Kaði Kel Keld Kemne Kemon Ken Kerst Kir Kirch Kirg Kirse Kisee Kitz Klau Klena Klow Kob Kock Kohn Kott Kow Kra Krau Krauf Kren Krey Krome Kuf Kul Kum Kup Kurg Kus Kár König Könul Külsa Künch Lach Lad Ladt Lagen Lahl Lainn Lam Lamen Lan Lana Lanau Landa Lann Latz Lau Lauel Ledt Leina Len Lens Lerg Lern Lerst Lest Leste Leue Leurg Lia Ligen Lik Lim Lin Line Linge Lip Litz Lival Lohle Loma Lomr Lotte Lotz Loued Louen Low Loßen Luch Ludal Lude Lun Luna Lusen Lut Lych Lysen Löfn Lön Lör Lörlo Lübth Lück Lüdi Lügen Lündi Lünna Lünz Lütz Lütze

Magen Maind Mal Malln Mand Mar March Mard Marg Mark Markt Mart Marth Mau Med Mee Mef Meils Mel Meld Melde Melim Mels Mem Men Menau Mer Merg Mes Metha Mil Mils Min Mines Mirch Mirde Mirf Mirg Mit Mitia Mitz Monau Morn Mung Murth Mán Möl Mölld Mönid Mönn Mühl Münch Münd Münth Nau Naun Nebin Neck Necke Nee Nek Nen Nenda Nens Ner Nerg Nerma Nert Nes Netz Neuen Neul Neum Neunn Neurg Neven Newal Neyen Nich Nies Nig Nigen Nilde Nin Ninde Ning Nisim Nitz Njart Njört Noitz Nord Norde Norf Nost Now Nurg Nærf Nörd Nörf Nürg Obech Obelz Oben Obenz Obera Oberd Oberg Obern Obig Obuch Och Ock Ode Oel Oels Oerg Oesch Oessa Oeten Ofelm Olbe Old Olden Olz Opfel Ord Orden Ordt Orf Org Orn Osch Ossen Ossin Ossul Osta Osten Osth Oth Pain Par Patz Pau Pein Pen Per Pfa Pfan Pfen Pfurg Phel Phim Pla Plin Poch Pohau Pold Porth Poten Prin Puch Pul Pulf Putel Quel Quelf Quels Rach Radt Rakow Rand Rann Rasen Rath Ratz Rau Raum Raun Reck Red Reel Ref Rega Reim Remst Ren Rena Renz Resen Reut Rey Reyja Rhe Rheim Rhen Rhena Rherg Rid Ried Riede Riez Rijen Roch Rod Roden Rogen Rold Rolz Romar Ron Ronne Rop Row Rozen Roß Roßen Ránig Röden Rück Rüm Rünch Saal Saan Saarl Sach Sal Sam San Sana Sang Sann Sanna Sany Sarl Sart Sasen Sch Schen Schia Schl Schof Schrd Schte Schöð See Sel Selda Sen Sena Senz Sie Sien Sig Sigen Sim Sin Sina Sing Ska Skau Skjen Skord Skow Sna Snitz Sold Soll Son Sona Sow Soyth Spa Spau Speim Spel Spelf Spen Sper Sperf Speth Stach Stal Stau Staut Steid Steim Sten Ster Sterg Sterr Sth Sthop Sting Sto Stoch Stock Stren Strin Städt Sul Sulde Sulld Sum Sun Sunau Sung Sus Svel Sverg Svill Sviðr Syk Syken Ságar Ságau Süde Süden Tadel Taden Tadt Tal Tau Teim Tel Ten Terg Terio Tert Thau Tiane Tich Tin Tinau Tjørn Tocha Tomar Torg Tran Trau Trava Tren Trie Tring Tron Tyst Töne Tübz Uden Udin Uen Uetch Ulzen Unrau Urt Ussee Uwer Uwör Val Valch Vand Vanna Var Vart Vech Vedy Veim Velda Veln Ven Vend Ver Verg Vern Vest Viam Vich Vil Vin Vip Viðr Vogne Vold Volde Vole Vren Væna Vörd Vörðr Waach Wadt Wagen Wal Wald Walda Wali Walka Walke Wall Walln Wals Walth Wana Wanau Wand War Warna Was Wede Wedt Wegk Weila Weim Wein Weing Weirg Wen Wer Werau Werd Werg Wesch Wesen Weske Weten Wetz Wich Widen Wie Wied Wiedt Wig Wiga Wil Wild Wilde Willw Win Wiph Wisch Witz Wold Wolde Wolz Woode Worf Wurg Wurth Wusau Wykk Wört Würg Würn Xen Yre Yvde Zen Zer Zerg Ziedt Zietz Zig Zin Zitz Zoge Zow Zweim Zwer Zwerg Zwin Zwitz Zör Zörf Ård Ården Öld Ölen Übz Þordt Þrich

[sillypubby]

BARK BARKL BGHGRGRRR SNARRLL BARK BARK ABERRKM GRRRRRR ARRK BARKL

ok sorry just needed to get that out

[anidealvenue]

Germany based automotive engineering services companies

Bertrandt AG, https://www.bertrandt.com/. Bertrandt operates in digital engineering, physical engineering, and electrical systems/electronics segments. Its Designing function includes designing of all the elements of the automotive.

FEV Group GmbH, https://www.fev.com/. FEV is into the design and development of internal combustion engines, conventional, electric, and alternative vehicle drive systems, energy technology, and a major supplier of advanced testing and instrumentation products and services to some of the world's largest powertrain OEMs. Founded in 1978 by Prof. Franz Pischinger, today the company employs worldwide highly skilled research and development specialists on several continents.

Cientra GmbH, https://www.cientra.com/. Cientra expertise across VLSI, ASIC, FPGA, SoC engineering, and IoT accelerate our delivery of customized solutions to the Consumer, Aviation, Semiconductors, Telecom, Wireless, and Automotive industries across their product lifecycle.

IAV GmbHb, https://www.iav.com/en/. IAV develops the mobility of the future. Regardless of the specific manufacturer, our engineering proves itself in vehicles and technologies all over the world.

Porsche Engineering, https://www.porscheengineering.com/. Porsche specializes in different areas of automotive engineering, Derivative and System Development, Testing, and Digitization.

Arrk Engineering, https://engineering.arrk.com/. Arrk specializes in end-to-end and comprehensive support of the entire product development process - from the conception phase through series development to validation and system integration of mechanical and electronic components.

#automotivegermany #automotive engineering #automotive #germanycompany

[businessertreter]

Research Details Developments In The Selective Laser Sintering (SLS) Service Market Analysis And Forecast To 2028 | Protolabs, Xometry, Hubs

The recent research report on the Global Selective Laser Sintering (SLS) Service Market 2022-2028 explains current market trends, possible growth rate, differentiable industry strategies, future prospects, significant players and their profiles, regional analysis, and industry shares as well as forecast details. The detail study offers a wide range of considerable information that also highlights the importance of the foremost parameters of the world Selective Laser Sintering (SLS) Service market.

Market Is Expected to Reach Rise At A CAGR Of 22% During The Forecast Period

(Exclusive Offer: Flat 30% discount on this report)

Click Here to Get Free Sample PDF Copy of Latest Research on Selective Laser Sintering (SLS) Service Market 2022 Before Purchase:

https://www.theresearchinsights.com/request_sample.php?id=490255&mode=V004

Top Key Players are covered in this report:

Protolabs, Xometry, Hubs, Fathom, Proto3000, 3D Systems, Scicon Technologies, 3D People, Unionfab, FacFox, RapidMade, ARRK, Berling Technology, Black Dragon, Zhongheng Lianchuang

On the Basis of Product, the Selective Laser Sintering (SLS) Service Market Is Primarily Split Into

·         End-use

·            Low-volume Production

·            Rapid Prototyping

·            Others

On the Basis of End Users/Application, This Report Covers

·         Vehicles

·            Aerospace

·            Electronics

·            Medical

·          

The regions are further sub-divided into:

-North America (NA) – US, Canada, and Mexico

-Europe (EU) – UK, Germany, France, Italy, Russia, Spain & Rest of Europe

-Asia-Pacific (APAC) – China, India, Japan, South Korea, Australia & Rest of APAC

-Latin America (LA) – Brazil, Argentina, Peru, Chile & Rest of Latin America

-The Middle East and Africa (MEA) – Saudi Arabia, UAE, Israel, South Africa

Major Highlights of the Selective Laser Sintering (SLS) Service Market report study:

·         A detailed look at the global Selective Laser Sintering (SLS) Service Industry

·         The report analyzes the global Selective Laser Sintering (SLS) Service market and provides its stakeholders with significant actionable insights

·         The report has considered all the major developments in the recent past, helping the users of the report with recent industry updates

·         The report study is expected to help the key decision-makers in the industry to assist them in the decision-making process

·         The study includes data on Selective Laser Sintering (SLS) Service market intelligence, changing market dynamics, current and expected market trends, etc.

·         The report comprises an in-depth analysis of macroeconomic and microeconomic factors affecting the global Selective Laser Sintering (SLS) Service market

·         Market Ecosystem and adoption across market regions

·         Major trends shaping the global Selective Laser Sintering (SLS) Service market

·         Historical and forecast size of the Selective Laser Sintering (SLS) Service market in terms of Revenue (USD Million)

SPECIAL OFFER: AVAIL UP TO 30% DISCOUNT ON THIS REPORT:

https://www.theresearchinsights.com/ask_for_discount.php?id=490255&mode=V004

Market Segment Analysis:

The Selective Laser Sintering (SLS) Service Report provides a primary review of the industry along with definitions, classifications, and enterprise chain shape. Market analysis is furnished for the worldwide markets which include improvement tendencies, hostile view evaluation, and key regions development. Development policies and plans are discussed in addition to manufacturing strategies and fee systems are also analyzed. This file additionally states import/export consumption, supply and demand, charge, sales and gross margins.

Browse Full Report at:

https://www.theresearchinsights.com/reports/global-selective-laser-sintering-sls-service-market-growth-2022-2028-490255?mode=V004

The Research covers the following objectives:

– To study and analyze the Global Selective Laser Sintering (SLS) Service consumption by key regions/countries, product type and application, history data from 2016 to 2022, and forecast to 2026.

– To understand the structure of Selective Laser Sintering (SLS) Service by identifying its various sub-segments.

– Focuses on the key global Selective Laser Sintering (SLS) Service manufacturers, to define, describe and analyze the sales volume, value, market share, market competition landscape, Porter’s five forces analysis, SWOT analysis and development plans in the next few years.

– To analyze the Selective Laser Sintering (SLS) Service with respect to individual growth trends, future prospects, and their contribution to the total market.

– To share detailed information about the key factors influencing the growth of the market (growth potential, opportunities, drivers, industry-specific challenges and risks).

– To project the consumption of Selective Laser Sintering (SLS) Service submarkets, with respect to key regions (along with their respective key countries).

Report Customization:

Selective Laser Sintering (SLS) Service, the report can be customized according to your business requirements as we recognize what our clients want, we have extended 25% customization at no additional cost to all our clients for any of our syndicated reports.

In addition to customization of our reports, we also offer fully tailored research solutions to our clients in all industries we track.

Our research and insights help our clients in identifying compatible business partners.

Note: All of the reports that we list have been tracking the impact of COVID-19 on the market. In doing this, both the upstream and downstream flow of the entire supply chain has been taken into account. In addition, where possible we will provide an additional COVID-19 update report/supplement to the report in Q3, please check with the sales team.

About us:

The Research Insights – A world leader in analysis, research and consulting that can help you renew your business and change your approach. With us you will learn to make decisions with fearlessness. We make sense of inconveniences, opportunities, circumstances, estimates and information using our experienced skills and verified methodologies. Our research reports will provide you with an exceptional experience of innovative solutions and results. We have effectively led companies around the world with our market research reports and are in an excellent position to lead digital transformations. Therefore, we create greater value for clients by presenting advanced opportunities in the global market.

Contact Us:

Robin

Sales Manager

Contact number: + 91-996-067-0000  

[email protected]

https://www.theresearchinsights.com  

#Selective Laser Sintering (SLS) Service Selective Laser Sintering (SLS) Service Market Selective Laser Sintering (SLS) Service Market 2022 S

[incorrectaqoursseiyuuquotes]

Arisha: What's for dinner?

Rikyako: I can’t tell you, it’s a soup-prise.

Arisha: Is it soup?

Rikyako: I soup-pose it could be.

Arisha: Enough with the soup puns!

Rikyako: You never soup-port me

*Later*

Arisha: IT WAS TACOS?!

-Mod Neko

#source: tumblr #incorrect quotes #incorrect aqours seiyuu #arrk #rikako aida #aida rikako #arisa komiya #komiya arisa #love live #love live seiyuu #aqours #aqours seiyuu

[knight-of-the-thorn]

Side not related to a crit role post my friend just made, I know logically Arkk is voiced by Matthew Mercer. We make fun of Arkk for being voiced by Matthew Mercer. He knows Matt Mercer, he's worked with Matt Mercer, he has, in several non trivial ways, been Matt Mercer, but he doesn't fucking sound liike Matt Mercer.

#gw2 #guild wars 2 #arrk #mage rambles

[lordsireno]

Oh you thought Forgus (Arrk?) shipping hours were over? Think again! Now they're in colour! (I'm writing a sequel to the shipping fic so obvs I can't stop thinking of them)

#Deponia #deponia argus #Deponia OC #organon oc #Fork #Forgus #Fork X Argus #monkeydraws #The fandom made me love them your honour I sware #That's right everyone else is to blame for these two fools #For anyone this deep in tags they're both Ace as well!!! #They're hella Ace and Argus is also Aro but has an undefinable connection to Fork #They're Partners if you catch my drift #Fork only has these strong unique feelings towards Argus #oc x canon

[arishamod]

From Arisha’s Twitter 25 June 2018

@box_komiyaarisa:

I just noticed that there’s a lot of salt tablets in someone’s bag  ⌄̈⃝ lol It will be eaten in LA and Fukuoka.

#AndTheCulpritIs #Aidasan #SheIsLikeThis #DidYouKnow

From Rikyako’s Twitter 25 June 2018 , Replying

@Rikako_Aida:

Eh.. Asamin is also in on this...  (´･ω･`)

From Arisha’s Twitter 25 June 2018 , Replying

@box_komiyaarisa:

So Rikyako dragged someone in, and from what I see

She’s an accomplice! LOL

In the end, it was from Asami-san. It was a matter of being an accomplice  😆

#twitter #translations #Arisha #Komiya Arisa #ARRK #Rikyako #Aida Rikako #Asamin #Tano Asami #Arishamod posts

[athyrabunlord]

About your Arrk comic, I would say B because it is obvious that Rikyako just wants to mess with Arisha but if Arisha's the type you do not want to mess with (I mean come on, her time on Go-Busters prove she is a badass) then definitely A.

Haha, with rkk’s personality, (B) is the likely route yes XD (A) is based from an older tweet where rkk called arisha ponkotsu and, iirc, arisha said “oi, Aida.” which rkk responded with “hai, sumimasen.”

I love these two’s dynamic :’D

#anon ask #arrk #these two dorks #<3333

[money-magnet]

Due to the event last year March i am Changing my strategy i think it will be wise to take down all my other investment at low cost lost rather than loosing all and switch to Apple my favourite stock!

#investing #stock market #appl #ogi #trxc #bngo #can #ada #tsla #arrk

[ask-tssb]

what if myu/topaz as an arceus?

Myu: In a transformation? I don't think anyone could ever turn into her. No one knows for absolute certain what she looks like, or if she actually has a form. Sort of, um... imperceptible.

Topaz: Arrk... ee-is?

Myu: Oh, right, I suppose you don't know! Well, she's the first thing that ever existed. Before the grass, or the world, or even the stars, there was an egg laid in the darkness, before life itself. When the egg hatched, the stars were born, and so was Arceus. From her, Time, Space, and the Reverse began flowing from the beating heart she had given the universe. Her one thousand arms shaped all there is in the sky.

Topaz: Wow!! I thought she didn't look like anything? I want a thousand hands!

Myu: I suppose it could be non-literal. "Arms" could be anything, like streams of light.

Topaz: What do you think she looks like, Myu?

Myu: Well, umm... I think she looks like stardust, personally.

#the stars shine bright comic #asktssb #myu #topaz #mew #pokemon #worldbuilding #anonymous

[the-toybox-general]

OKAY I JUST UPLOADED A BUNCH OF CRESTS AND TUMBLR IMMEDIATELY UPON ME POSTING THEM MARKED THEM AS SENSITIVE LIKE ME TOo

#it'll get fixed tommorrow im sure #but this means some of my followers wont even get to see the crests #until then #ufuIUHFG #sorry guys! #General's Journal #theyve been m arrked for reviieww